Search results

  1. S

    Adjusting valves on 302 with hydralic lifters

    This is new and the adjustment has never been done, not sure what it is called but it needs attention. sparx
  2. S

    Adjusting valves on 302 with hydralic lifters

    I was planning on having the local mechanic finish building my engine and placing it and the trans back in the car, but scheduling seems to break down all the time. How hard is it to adjust the valves on the 302 with hydraulic lifters? My engine is all an new 302 circa 1986 roller cam...
  3. S

    65-66 front fender replacements- Do they fit?

    Thanks John I will call him. Is that red primer? Jim
  4. S

    65-66 front fender replacements- Do they fit?

    I would buy from them without hesitation but being in Arizona I am sure the shipping would kill me. Worth a phone call right?
  5. S

    65-66 front fender replacements- Do they fit?

    My car has a poorly fitting replacement left front fender. It is out of whack at the front top, top adjacent to the windshield and does not line up with the bolt on holes behind the headlight. I don't want to mess with this fender. I am planning to order a "original tool" fender from NPD...
  6. S

    For Sale: 1966 Rolling Chassis

    Deleted post deleted
  7. S

    For Sale: 302 Roller Cam long block NEW!

    FOR SALE: NEW Ford 302 roller cam engine professionally built from all new parts by Eastside Engines here in Tucson. Has Edelbrock heads, Edelbrock performance cam and new Dart crank etc. Engine was not completed or installed. Engine was balanced, included are damper, flex plate and timing...
  8. S

    For Sale HI PO Exhaust Manifolds NEW in BOX

    This is a brand new HIPO manifold set with bolts for sale. I bought these new for my 302 engine. These fit 289 302 and I believe 351. These were never installed on the engine. They are brand new and perfect and a very nicely made production. $199.00 plus actual postage I take pay pal...
  9. S

    For Sale 1966 Dash Pad NEW in wrap/box Ford Tooling

    Have for sale brand new still in plastic wrap black FORD tooling black dash pad for the 1966 Mustang. This is the best quality part made with FORD Tooling. $159.00 plus actual shipping Sparx [email protected]
  10. S

    Need good way to strip paint off my car

    I stripped the aftermarket junk paint off my 66 with one gallon of heavy duty paint stripper from Home Depot. I used that and a putty knife. I did it in the hot sun, the paint bubbled up and sounded like bacon frying popping off the body. Now a simple sanding of the factory paint that...
  11. S

    Where does this go?

    That is the protector for under dash wiring adjacent to the wiper linkage as mentioned. One of the fresh air intake nuts holds it in place, and once you align that one then the other should self explain. (I recall two fasteners) I took mine out some months ago to refinish the drivers side...
  12. S

    Inside door lock handle question

    It sure fit nice and solved the problem. Hard to believe how many things are worn out on the car, but it is old. sparx
  13. S

    Inside door lock handle question

    I got the problem solved by replacing the "Door Handle Shaft". This part contains the spring (in the back) that produces the force required to return the door lock handle to it's resting position. Here is an image of the old part and the package from the new: <a...
  14. S

    Filling in rocker trim clip mount holes

    I am going to eliminate the rocker trim moldings on my 66. Is it best to weld up the clip rivet holes or is a quality body filler (2 part) sufficient? I have a mig welder, hate to admit I have not tested it yet... :hide:
  15. S

    Inside door lock handle question

    Thanks Robbz I have a 66. Those are sold out so I may have to purchase the entire latch. Jim
  16. S

    Inside door lock handle question

    I successfully replaced the window regulator on my 66's drivers side today. Not too difficult but some work has to be done blind as you know if you have done this. I found another issue, in that the inside door lock handle does not spring back into the "home" position as does the passenger...
  17. S

    Best 15 Inch Tire

    Hipo Link is no good
  18. S

    Best 15 Inch Tire

    I believe they were Primacy michelins, sold the car recently so I cannot check. I am looking for 215 60 15 also and was trying to avoid BFG's this time around, but have not come to an alternative either. This is for my 66 coupe. sparx
  19. S

    Best 15 Inch Tire

    I had BFG Traction TA's on my 04 Monte Carlo and within a year they all went out of round. I had to replace them because they would not balance. I got Michelins. I would not recommend the Traction Ta's. I have heard the BFG Radials do not have this issue. sparx
  20. S

    65/66 dual exhaust brake line photo

    Yeah once you find that spot everything falls into place. ;) sparx
Top Bottom
Back
Forums
Menu