Search results

  1. 408stroker5.0

    pic request...275/50/15 with 8" wheel 5.5BS

    I just purchased the same tires (275/50R15 M/T radials) as well for my GT and was wondering the same thing. I was considering running a 9 or 10" rim though with 5.5 backspacing and I'm wondering what I'm going to have to do to make them fit with out rubbing. I dont have tailpipes or quad shocks...
  2. 408stroker5.0

    LOL, Now THIS is rustproofing

    Someone please tell me this is a joke
  3. 408stroker5.0

    Converting to 5 lug Disc With Moser 9" On A Budget???

    I'm finnaly getting at converting my 87' Fox to 5 Bolt and throwing in my bolt in Moser 9" as well. For the front I'm going with the set up off of a 94' SN95 Mustang which is pretty straight forward. The question I have is what can I run on the rear for a disc brake setup with the Moser 9"? I'm...
  4. 408stroker5.0

    HOW TO TELL IF IT IS A CERVINIS HOOD OR NOT

    From what I know Cervinis always put's there logo on the underside of the hood. I know my 2.5" Mach 1 Cowl Hood has there logo on it. Best thing to do maybe is email Cervinis and ask them if they always put there logo on there products.
  5. 408stroker5.0

    408 Stroker w/ Twin Turbos?

    :drool: :drool: :drool: I woudnt mind knowing myself.
  6. 408stroker5.0

    Been trying to decide on heads all day, Need Help!!

    From what I've heard Thumper's are great...especially when on a budget. BUT.....I've always felt that Edelbrock Performer and Performer RPM Heads are the best bang for the buck. They may be a bit more money, but whats another couple of hundred...wait a bit and save up a bit more money if you...
  7. 408stroker5.0

    which carbed intake,vic jr or weiend stealth

    A 750 on a 302 is NOT fine.....750CFM is TOO MUCH carb Period...especially for fox3streetracer's combo. Of course it will work, and it may work alright but the 650 would outperform and be more responsive then a 750 whether it's a Vac or a Mech. Secondary. I run a 750cfm Mighty Demon on my...
  8. 408stroker5.0

    Vic jr or AFR for this cam?

    Vic. Jr's or AFR205's wont be enough.....AFR225 would be the way to go to reach your goal. Vic. Jr's are a great bang for the buck head but they simply wont be enough for your combo. Even AFR205's put out better flow numbers then the Vic. Jr.
  9. 408stroker5.0

    which carbed intake,vic jr or weiend stealth

    I'd go with an Edelbrock Performer RPM Air Gap, and switch over to a 650cfm Mech. or Vac. Secondaries carburetor (Such as a Barry Grant Speed Demon) to get the most out of your combo....A 750 is a little too big. The Air Gap is rated at 1500-6500 which would probably suite your combo better then...
  10. 408stroker5.0

    408 Stroker Kit?

    In terms of what kind of power you'll be making it all depends on what head's, cam, compression etc. etc. your running. (See Sig)I'm running AFR 205 heads, 10.8:1 Compression, Comp Hyd. Roller Cam etc. etc. and I'm pushing 550+ at the flywheel. I've had this combo/engine for over two years now...
  11. 408stroker5.0

    Roll Cage

    I am at work on nightshift right now but tommorow I will try and post some pics....If I can figure out how to load them....I've never posted pics on the internet before.
  12. 408stroker5.0

    Roll Cage

    On my car I went with through the floor subframe connectors which I got custom made/welded in at a chassis shop in my area. I then had them weld in an 8 Point Chromoly Steel Roll Bar/Cage. I was very impressed with how it turned out. I've always felt that through the floor subframe connectors...
  13. 408stroker5.0

    full motor swap??

    As far as the fuel system goes there is alot of different ways you can go. I converted from Fuel Injection to carb as well so I'll briefly describe what I did in my case. I removed ALL the factory lines to start off. I kept the factory tank and purchased a drop in fuel tank pick up from Mallory...
  14. 408stroker5.0

    full motor swap??

    The swap is pretty straight forward and fairly simple.......there is more too it then you have listed though. The best thing to do is use the search functions and youll get tones of threads with alot of info that will help you with this swap. Good Luck!!
  15. 408stroker5.0

    Which 7qt. oil pan for a 351w?

    What I can tell you is DONT use a Milodon pan.... I made the mistake of going with a 7qt. Milodon pan. First of all the pan fit like crap, mainly due to the fact that it was slightly warped. It didn't clear the oil pump very well, so I had to slightly massage that area with a hammer. The oil...
  16. 408stroker5.0

    ignition

    I woudn't use MSD (Except for Wires) if someone paid me....Alot of there stuff especially the 6A and 6AL boxes etc. are old technology. I used to work in a performance shop and the amount of MSD products that came in under warranty was just ridiculous. I used to run MSD, and I finnaly had enough...
  17. 408stroker5.0

    408 Stroker Kit?

    I'm running one of Scat's kit's which consist's of there SCAT 9000 Crank, Forged H Beam Rods & ARP Bolts, and SRP Forged pistons. What can I say, it came together great and has been working just fine for 2 years now. It was very affordable being that the crank is a specially designed Cast crank...
  18. 408stroker5.0

    dss racing 7 qt oil pan?

    I havn't heard of too many guy's running the DSS oil pan. What I will tell you is DONT use a Milodon pan....I'm running a Probe main support on my stroker as well and I made the mistake of going with a 7qt. Milodon pan. First of all the pan fit like crap, mainly due to the fact that it was...
  19. 408stroker5.0

    Where can I find good/cheap replacement BBK header gaskets/bolts?

    DONT get replacement BBK gaskets....there Cheap crap and dont last very long. Get a good set of Fel Pro Performance Header gaskets and you'll be happy for awhile. As for bolts I've used those locking header bolts before and found them to be more of a pain in the but then anything. The ones BBK...
  20. 408stroker5.0

    Tremec TKO Question

    I was told when I bought my TKO to use syncromesh fluid only. Anything else would also void warranty. Do not use Dextron. Shon
Top Bottom
Back
Forums
Menu