Search results

  1. bill302

    line lock ?

    see if this helps click on link below... http://www.motorsportsdigest.com/tech/install2.htm
  2. bill302

    How to ReAdjust Pedestal Mount Roller Rockers

    call crane cams tech line (they make that rocker arm) @ 1-386-258-6174 they can tell you adjustment specs...yes the upper intake needs to be removed but you can reuse the gasket with no problems...
  3. bill302

    Where can I get a new/rebuilt oem distributor from online?

    if you have a napa autoparts they have one for $109 dont know what kinda warranty...if you carry the old dist. with you and turn it in at time of purchase you will not have the core charge...
  4. bill302

    Where can I get a new/rebuilt oem distributor from online?

    here you go a lifetime warranty distributor for 87.99 plus tax....click on link below... http://www.autozone.com/selectedZip,35905/initialAction,partTypeResultSet/initialN,16400030/initialNtt,/initialNo,/shopping/selectZip.htm
  5. bill302

    need help with roller rocker arms

    a friend of mine with the same setup as me gave me his custom cam specs and i found a used custom crower cam for sale with the same specs. and i bought it.
  6. bill302

    need help with roller rocker arms

    i was told i could run stock valvetrain as long as the stock springs were within spec. i just had the heads reworked and checked at a machine shop after i ported them stock springs were replaced with new but i was told it would be better to have some roller rockers with this cam...
  7. bill302

    help me understand roller rockers!!!

    ok, i am installing a custom cam. I have ported e7's. I would like to install new 1.6 roller rocker arms. I really need to know if i need to install roller rocker arms or can i just install the factory rocker arms with the custom cam specs are listed below. i understand i have pedestal rocker...
  8. bill302

    need help with roller rocker arms

    thanks for the info ya'll,should i use the stock rockers the custom cam specs are listed below LSA: 114 Duration: 280 advertised. Duration @ 50: 229 for I/E Lobe lift I and E: .321 gross Valve Lift w/1.6 Rockers: .514 Intake Lobe Centerline: 110
  9. bill302

    need help with roller rocker arms

    alright, im installing a custom cam and i need help finding the right roller rocker arms my cam is set up for 1.6's. click on link below are these the rocker arms i need with my stock ported E7's...anyone know of any better deals on a set of roller rocker arms...
  10. bill302

    x303 cam info...

    x303 cam who runs one with a faily stock motor and whats needed to run one see my signature below??? i already know ill need stiffer valve springs i can use crane cams part # 96870...
  11. bill302

    cam selection

    well anyone else? has anyone run this cam cause i think im going to get it....also how would i adjust the factory rocker arms would it be as follows (same as stock)Rotate the crankshaft until the tappet is resting on the heel (base circle) of the camshaft lobe tighten to 25 lbs.
  12. bill302

    Traction lok rebuild

    Traction-lok rebuild: A brief traction-lok description: The t-lok, IMHO, is a very simple yet effective method of torque transmission. It uses a combination of frictions and steels; the steels spline to the O.D. of the side gears (the I.D. is splined to accept the axles), and the frictions...
  13. bill302

    Codes 41 and 56 what can I do??????

    I would say that it is most likely oxygen sensors that have reached the end of their usable life. You could also have a vacuum leak or something else that is driving the engine extremely lean. I would make a cursery check for vacuum leaks and if nothing shows up, replace the oxygen sensors. and...
  14. bill302

    Car backfiring and hesitant at the top end

    what codes did you get, have you cleaned your maf sensor?
  15. bill302

    Car backfiring and hesitant at the top end

    have you checked for vacuum leaks?
  16. bill302

    Plug on side of t5z?

    Neutral Saftey Switch- Automatics have a neutral safety switch, so that the car can only be started in park. For a manual you do not need this, and the switch must be by-passed or the motor will not start. On early Mustangs the four-plug harness sticks out of the firewall above the master...
  17. bill302

    Plug on side of t5z?

    that is the reverse lights connector.
  18. bill302

    give me ur knowledge

    7.5 on top in pic. and 8.8 on the bottom....
  19. bill302

    cobra intake

    the upper intake is the same as the 302 but the lower intake on the 351 will not fit the 302....
  20. bill302

    cobra intake

    if you will be patient and check e-bay daily you should be able to get a 94-95 model cobra intake there...for a decent price thats where i got mine....they have one now for sale but its powdercoated (white) but you can repaint over it....check it out click on link...
Top Bottom
Back
Forums
Menu