Search results

  1. bill302

    Need stock repacement Torque converter, help w/ application...

    autozone sells a torque converter for your car should be as good or better than stock.i'm sure jegs and summit do too..click on link for autozone t.c.. http://www.autozone.com/N,11200809/shopping/partTypeResultSet.htm
  2. bill302

    So would anyone believe that .......

    great im glad you located the problem.cant wait for the pics....and thanks for keeping us updated it will help all of us diagnosis future problems!!!!
  3. bill302

    all this work and it wont run

    recheck all your wires with the diagram below.if all wires are correct ..remove #1 cylinder plug and place your finger over the sparkplug hole and seal hole with your finger. then turn engine by hand until the pressure blows your finger off the hole. insert a screwdriver carefully into the...
  4. bill302

    ABS REMOVAL

    i doubt if it would stop the same in the rain or when you have to make some evasive moves with braking involved. brakes tend to lockup in these situations which can be dangerous....
  5. bill302

    Couple of issues

    click on link below and pull the codes yourself with a test light....i dont know what the shop means by saying the codes had to be active to show up if they mean the light has to be illuminated there wrong...repost results which may help diagnosis a/c problems...
  6. bill302

    Symptoms of bad O2 sensors? What do you think is wrong?

    nothing negative happened to me...
  7. bill302

    A.C. Help

    do you have the proper amount of R134a or freon in the system?
  8. bill302

    Help!! My Car Just Died

    is there gas in the tank? if so do you have pressure at the fuel rail. if not the rubber line in the tank could have come loose...
  9. bill302

    Header + EGR Trouble

    i think this is what he is talking about click on and read his thread....hang in there Adam95GT everything will come together http://forums.stangnet.com/showthread.php?t=718211
  10. bill302

    Symptoms of bad O2 sensors? What do you think is wrong?

    yes exactally what i did.yes you will run the stock belt with the delete pulley...i would remove the smog equip. as long as you are not require to pass emmissions testing...click on link below it will tell you step by step instructions how to remove smog equipment and tools needed...its the...
  11. bill302

    Help!! My Car Just Died

    let me know if it helped...and if it does not check all of the underdash fuses and fuses in engine compartment.
  12. bill302

    Help!! My Car Just Died

    check fuse # 18 on the 94 the #18 fuse is for ccrm,ign power,icm,charging system,regulator signal..
  13. bill302

    ABS REMOVAL

    why remove it...i would not unless its strictly a strip car.
  14. bill302

    oil filter leaking oil???

    remove it and return it to the place of purchase for an exchange and install the new one and see if that cures it i have seen a few filters with defects and some straight from the factory with holes in them. i have a friend that works at an oil change buisness and from time to time he will show...
  15. bill302

    State patrol mustang alternator

    heres some good info. below that might help click on links below...and there are alot of good ssp forums out there with knowledge you seek about ssp mustangs like yours....do you need a new alternator if so i would suggest to get the one you have rebuilt at a reputable alt. rebuild shop usually...
  16. bill302

    turbocoupe t5 into a 5.0L

    The part number you need is #14672 at Autozone. It's for a diesel Ford Ranger.(this is the pilot bearing you will need to install the 4 banger unit.) copied from StangGT1995 link>http://forums.stangnet.com/showthread.php?t=717444&highlight=t5+pilot+bearing
  17. bill302

    Water coming from valve covers?

    good you can reuse the studs...and no the head bolt holes that are under the valve covers do not penetrate the water jacket the lower bolt holes do and need to be coated with high temp nonhardening sealant...like in pic. below that is what i use.
  18. bill302

    Water coming from valve covers?

    i would get the heads checked for cracks and flatness...what type of headbolts did you use...you will need a new set if there torque to yield.
  19. bill302

    Water coming from valve covers?

    look at the pistons are any noticeably cleaner than the others? alot of times if you have a bad headgasket leak the pistion where the coolant is leaking into will be alot cleaner than the others because the steam cleans the carbon off the piston..and you have to look closely at the headgasket to...
  20. bill302

    Water coming from valve covers?

    that is correct...pic of my old headgasket...look at the pistons are any noticeably cleaner than the others? alot of times if you have a bad headgasket leak the pistion where the coolant is leaking into will be alot cleaner than the others because the steam cleans the carbon off the piston..