Search results

  1. T

    Anyone got a Mac Straight Shot 85mm Mass Air system????

    Yes the filter goes into the fenderwell and actually turns down. Its kind of a pain to get in there but its better with 2 people.
  2. T

    Anyone got a Mac Straight Shot 85mm Mass Air system????

    I had a 85mm straight shot system and then put a densecharger on and will not look back. The straight shot looks good but performs nowhere near as good as the densecharger. I wish I had took the advice that I had got to start with and bought the densecharger first cause I would have an extra...
  3. T

    What mods to do next?

    Here are my current mods on my 2002 GT. Full length tunable induction, flowmaster catback and FRPP 3.73s. I was thinking about getting an o/r pipe probably a mac prochamber or a c&l plenum with accufab 75mm tb. Which one should I go with first? Which one would give me the most bang for the buck?
  4. T

    Why do some claim a tune is needed after a CAI??

    If you add a cai it tends to lean the a/f ratio. If you add an o/r midpipe the a/f ratio richens up. So if you add both wouldn't that tend to even things out? Just a thought.
  5. T

    Dallas Mustang Speedo Recalibrator

    I have a FRPP speedo recalibrator and I spliced mine into the cigarette lighter. I think its the brown wire in its connector. I'm not 100% sure but there's only 2 wires there so just find the hot wire and splice it there. The lighter is switched and it won't hurt to splice it there. Also...
  6. T

    Problems With Gas Gage / Hesitation on start

    I have an 02 GT and have the same problem sometimes. I've found that if you turn the key on for about 2-3 seconds and then start the car I rarely have the hard start anymore. And don't leave your car running when you go in because you may come back out and your car is gone. :( This happened...
  7. T

    K&N FIPK or Roush Performance Cold Air induction Kit

    I 2nd on the Demolet. Its a great intake with good gains that you can actually feel. It took me about an hour to install by myself but it took me a little while to take the POS mac straight shot system out.
  8. T

    Suspension Help!!!

    Right now I'm using Kumho 712's that are going to be replaced in a couple of months. I'm going with some Hankook Ventus H405's in the stock size 245/45 17. I need something with a little more treadwear than the Kumho's. I'll call Maximum Motorsports today and see what they recommend. Thanks...
  9. T

    Suspension Help!!!

    what about the offset rack bushings. will they help any. its the cheapest route to go first.
  10. T

    Suspension Help!!!

    After I put my lowering springs on my car wants to wander over uneven roads. You have to chase the car around sometimes. I took it to get aligned and it was still straight after the install. I looked at Steeda's website and seen that they have offset rack bushings, x2 balljoints and bumpsteer...
  11. T

    Midpipe Ques.

    If this is ghetto then someone that takes their truck to an exhaust shop to have dual exhaust put on is ghetto too then, right. Basically they're cutting stock pipe and making a dual exhaust kit and welding together to make the kit. Sure beats the hell out of paying $500-$600 for a kit already...
  12. T

    Midpipe Ques.

    You guys are forgetting something, he doesn't have alot of money to do this with. Whats ghetto about it. We're basically making our own exhaust instead of paying someone money for their product. And he doesn't want a xpipe. The pipe is basically going to be and look like an o/r pipe once we...
  13. T

    Midpipe Ques.

    My buddy has a 2001 GT and a stock hpipe that someone gave him. He was wanting to gut the cats on the stock pipe and use it on his car. I thought maybe we could cut the back 2 off and replace them with the same size diameter pipe and just gut the front 2. Or maybe just gutting the front 2 and...
  14. T

    Ford racing speed recalibrator

    I just installed mine the other week. The instructions said that the jumpers were already set up for the signal our vss is. Just leave it alone and worry about the bottom switches. If you don't know how to set the switches here goes, take the gear you started with and then divide by the...
  15. T

    Gear Whine?

    Well the bearings only had 35,000 miles on them so I figured they should be ok. Ford recommended 12 in./lb for a used bearing and 20-25 for a new bearing.
  16. T

    Trans noise??

    Mine too only in 5th gear. If I hold the shifter handle it quiets down some though. Don't really know why it does that.
  17. T

    Gear Whine?

    They are FRPP gears. I had to shim mine .10" to close up the backlash. When we reversed the shims it had .018" backlash. Soon as we added some to the left side and took some off the right the backlash was .011" Ford recommends .10"-.012". I ran 3 heat cycles for 10 miles and then let...
  18. T

    Gear Whine?

    I installed my 3.73s about 2 weeks ago. Used the instructions per superstallions.com and my dad(mechanic for 42 years) helped alot also. After the setup the backlash was .011" and the pinion depth was dead on. No whine at all until today but the only time I hear it is in 5th about 55-60 mph...
  19. T

    Tailpipes

    I just found out that dynomax and pypes exhaust has just the tailpipes. The pypes exhaust ones are aluminized or ceramic and has stainless tips. About $225 for the pair. Dynomax were $215 from summit.
  20. T

    Tailpipes

    I'm looking for a company that sells just tailpipes with tips. When I bought my car it had flowmasters welded in and I would like to change them to 2.5" pipes. Who makes 'em?
Top Bottom
Back
Forums
Menu