Search results

  1. 1

    2 Questions?

    What are your mods?
  2. 1

    2 Questions?

    So is 82 mph good or bad for the 1/8th mile with my mods?
  3. 1

    2 Questions?

    hello :shrug:
  4. 1

    2 Questions?

    My mods are as follows. Cobra Intake Edelbrock Performer Heads 1.94 & 1.60 Valves E-Cam Mac 1 3/4 Longtube Headers Mac 3inch Pro Chamber H-Pipe Flowmaster 3inch One Chamber Flows Dumped Tremmec 3550 Transmission 24lb Injectors Pro M 75 Mass Air Just upgraded from 3.27s to 4.30s & got...
  5. 1

    Are these times & mph low or is it just me?

    Are there any tips that I can do to tune my combo in! I am really dissapointed wiht the mph! I was thinking of doing the following Setting the Timing to 14 degree's Fuel Pressure 40 psi Cleaning my Pro M with some Electric spray cleaner Changing to a 2 1/2inch Exhaust System from the the...
  6. 1

    Are these times & mph low or is it just me?

    PLus my one buddy who has everything I have Except the only diffrence is Stock Heads F-Cam He ran in the heat a 8.3 with a 1.7 @81.83 mph & that was on stock heads! WTF! :rolleyes:
  7. 1

    Are these times & mph low or is it just me?

    I don't have TFS Heads though! The Edelbrock Performers have the 1.90 & 1.60 valves! So the Intake should be flowing enough for these heads! I have been searching around on the search forum & everyone with Heads & Cam & Intake is running 84 85 mph in the 1/8th! I am sure I am losing 1mph...
  8. 1

    Are these times & mph low or is it just me?

    I am just concerned that this being a HCI car, I though it would mph alot more!
  9. 1

    Are these times & mph low or is it just me?

    I was on 315/35/50 BFG Drag Radials, The humity & air was really bad!
  10. 1

    Are these times & mph low or is it just me?

    Took my other Stang out to the 1/8th this past weekend! Timing @16 Degree's Fuel Pressure at 38psi Mods are as follows Cobra Intake E-Cam 1.6 Rockers Edelbrock Performer Heads Mac 3/4 Long tubes Mac 3inch Pro Chamber One Chamber 3inch Dumps Pullys 24lb injecter's Alum DS 3.73s...
  11. 1

    Should I Trade Or Walk Away!

    WE have a Holly 750Hp Seri's Carb at the house! The cam has a 690 lift! I think he built the car to Drag it! But he already has a 69 with a Big Block, I just think I am going to pass!
  12. 1

    Should I Trade Or Walk Away!

    Yeah i wanted to be able to drive it on the street! So then it is not possbile to get this car to run on Pump gas then! What about if I fill it up & 5 Octane booster's!
  13. 1

    Should I Trade Or Walk Away!

    You know I wonder why I even post here! I never get a FU$KING ANSWER HERE! :mad:
  14. 1

    Should I Trade Or Walk Away!

    Guy claims the car will run 10s on the motor! But he was running the car on Methanol & that he put it back on Pump Gas & that it is going to need a smaller Carb to run on Pump Gas! But with 13 1/2 to 1 Compression! I think if I run any Pump gas through it! It is going to have to be at least 110+...
  15. 1

    No Interior lights! PLEASE HELP!!!!

    Well I took the BUCKET out to the Drag strip this weekend & pulled a 1.78 60 ft & al of the sudden the Interior light started flickering on & off down the track! Got back to the pits & tried messing with the light switch & the Interior lights on the Dash & tach would come on if I would put...
  16. 1

    Snow Performance on n/a car

    i THINK IT IS ONLY FIOR SUPERCHARGED CARS!
  17. 1

    Pedestal mount rocker question

    The stock pushrods should be fine, On Pedalstel mount rockers all you need to do is tighten them down tight & go, You really don't have to worry about all the stuff like you do with stud mount rockers, Your rockers are just bolt on & go! :D
  18. 1

    moroso valve covers

    Where is the hole for the oil!
  19. 1

    WHO ALL IS IN TEXAS

    :D Dallas in the house here!
  20. 1

    Pics of Members/family/pets/etc. (56k warning!!!)

    Since we are posting pics Here is one of me & my wife & little boy!
Top Bottom
Back
Forums
Menu