Search results

  1. J

    MSD wiring harness?

    This makes installing a msd 6a, a plug affair with out it you have to hardwire the box in correct?? Is it worth the extra 25 bucks? any opinions i would appreciate
  2. J

    Lets play guess this part (pic)

    Yeah im talking about the big hole there was no screen, i stuck my middle finger down there once i located it, the gromment was there though. i understood once i figured out where it plugs into. i will be picking up a motorcraft gromment/screen and pcv tomorrow. Thanks again everybody
  3. J

    Lets play guess this part (pic)

    Well, i know why i was confused. It blew out( possible ring problem or just cheap?) so when i found it, it was sitting there attached to the intake but was just hanging out there sucking air and didnt know where the hole was cause im not too familiar with 5.0's yet. I felt rather silly when...
  4. J

    Lets play guess this part (pic)

    Thank you everybody
  5. J

    Lets play guess this part (pic)

    So what do i do with the little crank case air filterr? throw it out?
  6. J

    Lets play guess this part (pic)

    It does have one of those little mini crank case air filters on it, so did the guy just ghetto rig it and leave it open? should i just cap off the line going to the intake manifold?
  7. J

    Lets play guess this part (pic)

    Interesting looking PCV. So i assume its suppose to have another line coming from it? cause the way i find it it was just laying behind the TB with 1 line going to the intake mani sitting there sucking air? should it be T-ed
  8. J

    Lets play guess this part (pic)

    Ok this might be a dumb question but this is my first mustang so help me out please!?! Its a 90 GT since last week or so its been runing rich and had cold start problems will recenlty i noticed a leaking air sound from the drivers seat so today i decided to find out what it is. Upon...
  9. J

    I need a parts store battery (best ampage/cranking amps) that will fit in battery box

    I went to my local used battery/ alt rebuilder. Picked up some refurbished (good as new) no name battery for 30 bucks with 850 cranking amps whooooooooooooooooohoooooooooooooooooooooooooooo
  10. J

    Sheila Vs. turbo RSX (boo)

    You will lose, if you take it up past 115ish. They have sick top end
  11. J

    Spark help

    timing was set at 36 degrees advanced seems kinda way out ??? I think i'll just swap out the maf and injectors for some 24#'s and start from scratch
  12. J

    Spark help

    Thats the problem the CEL isn't on. I put a new distributer,wires,02's it has a new TB so the TPS is new it was just dynoed/chipped 2 weeks pryor to me buying it with a dead even 13.5 A/F. Now its running pig rich, If i turn on the a/c i can get high off the gas fumes coming thru the vents...
  13. J

    Spark help

    Help?
  14. J

    Spark help

    hello, i picked up a half built 90 GT Mods are as follows Ported stock heads 1.6 cranes B-cam Typhoon intake CAI with 73mm MAF #30 with 30lbs injectors Diablo chip SHorty headers to straight pipes with flowmaster dumps bbk 70mm TB It was just dynoed a few weeks ago made...
View older results
Top Bottom
Back
Forums
Menu