Search results

  1. 88gt373

    Air charge Temp sensor ?

    id just get a new one. theyre cheap enough and i got my from autozone for like 10 bucks.. i think you can check it with your OHM meter but im not sure what numbers you should look for. i replaced mine because it was really dirty and gunky
  2. 88gt373

    any experience with BAMA Chips w/ a blower?

    bump
  3. 88gt373

    Tune up incoming..

    no problem! i have a couple bolt ons and copper plugs are supposed to work best (from what im told here). also clean your throttle body blade and egr valve and spacer too every once ina while... they build up pretty fast.. a great but over looked upgrade is a oil catch can.. i have one i got off...
  4. 88gt373

    Tune up incoming..

    i use 10-30w semi-syn oil and i just rebuilt my motor... id use 10-40w if you have kind high mileage.. motor craft plugs work great. k&n filters are great too maybe even a bbk cold air intake.... i use msd wires, cap, rotor.. (8mm wires cut to fit).. some people use all motor craft stuff...
  5. 88gt373

    any experience with BAMA Chips w/ a blower?

    Thanks for clarifying that... there is a walbro 190lph now but i know it'll need to be upgraded. its getting kinda noisy.. im planning on getting a new gas tank kit, when i purchased the car it was sitting for a while and after starting it up it clogged the filter and sucked up some crud thru...
  6. 88gt373

    Eliminating A/C without a bracket/pulley?

    can that bracket be ran with the vortech V1 set up?
  7. 88gt373

    any experience with BAMA Chips w/ a blower?

    thats a good article everyone should read.... the guys guy at RPM said that 42lb (actually 40.52lbs and stock FP) should be set at around 75% duty cycle and FP bumped up to 45ish psi (making injectors run at 42lbs)... he said a the CL 80mm mas with the proper sample tube and stock MAF sensor...
  8. 88gt373

    any experience with BAMA Chips w/ a blower?

    its not my actual car but its exactly what mine looks like from that angle; minus the wheels (have have 17' silver cobras..) and i have chrome tail pipes ... i wasnt sure how to shrink my pics so i googled "grey 88 mustang" and it was on there... ;) so i called the shop near my house...
  9. 88gt373

    any experience with BAMA Chips w/ a blower?

    do i need to use the vortech FMU with that size? or would that be covered with a tune?
  10. 88gt373

    any experience with BAMA Chips w/ a blower?

    what kind of chip do you have? i deff want a switchable chip. i didnt realize you could put a opened loop and closed loop system and make it switchable like that... a commanded AFR tune sounds pretty nice. im going to call the shop around here and get a better idea of price and what i need...
  11. 88gt373

    any experience with BAMA Chips w/ a blower?

    i just ask about the MSD box because the V1 kit originally came with the Vortech/MSD timing box but i didnt get it with my deal since it was used.. and i got the FMU with the deal.. and from what i have read about some guys pretty much installing the kit as a whole and drive it... i know a tune...
  12. 88gt373

    any experience with BAMA Chips w/ a blower?

    your absolutely right.. id rather get a tune by a pro at a shop but the guys around my area charge top dollar.. and being the fact i dont have too much cash in my whole set up itd be hard to justify 1k spend at a tuning shop.. i know the best way to get it tuned is at a place with the right...
  13. 88gt373

    any experience with BAMA Chips w/ a blower?

    whats up folks.... i just got a used vortech V1 im waiting to install... i still need a few things to make it ready to install.. but im thinking about getting the BAMA chip but im told they dont work with supercharged cars... just N/A and bottle fed stangs up to 100 shot.. after all is...
  14. 88gt373

    Bama Tune, worth it?

    whats up folks.... i just got a used vortech V1 im waiting to install... i still need a few things to make it ready to install.. but im thinking about getting the BAMA chip but im told they dont work with supercharged cars... just N/A and bottle fed stangs up to 100 shot.. after all is...
  15. 88gt373

    PMS Tuner By EFI Systems for Sale!!!

    offers anyone? its a great system and a must if your running boost. it will make you system waaay more effecient.. better and smoother power across the whole rev range.. hit me up.. open to trades too... let me know what you have!
  16. 88gt373

    PMS Tuner By EFI Systems for Sale!!!

    I have a a complete system with upgraded version 4 Hardware, hand held controller, harness, and computer/ECU all for sale. was used on a powerdyne set up, 42lb/hr injectors. Car was said to have 400+rwhp.. For those of you who know about this system, its a one of the best tuner systems on the...
  17. 88gt373

    90k mile Fox as a Daily Driver?

    i love lt/ls motors, but 5.0's are way easier and affordable to work on/trick out. plus after about 135k miles on an ls1 lifters start sticking, oil starts burning, engine accessories start going out, etc.. theyre great cars (ls1's), but you cant beat a 90k mustang for $2900.. id say go for it...
  18. 88gt373

    PMS Tuner By EFI Systems for Sale!!!

    I have a a complete system with upgraded version 4 Hardware, hand held controller, harness, and computer/ECU all for sale. was used on a powerdyne set up, 42lb/hr injectors. Car was said to have 400+rwhp.. For those of you who know about this system, its a one of the best tuner systems on the...
  19. 88gt373

    Wheres the Deep Dish Foxbodies??

    Nice Hood Prop..... JK. the body is super clean and straight... nice cars
  20. 88gt373

    Help! Welded my rearend and now my car won't drive.

    How did you guys get a pic of my rear end? I really thought this thread was real. There are alot of dumb-it-yourselfers out there..... LOL
Top Bottom
Back
Forums
Menu