Search results

  1. dcstang67

    67 Mustang and Procharger

    I forgot to add that the engine is Fuel injected with late model mass air injection.
  2. dcstang67

    67 Mustang and Procharger

    Has anyone ever stuffed a Procharger under the hood of a classic Mustang? I have a P600B Procharger kit and was wondering how it would fit in my 67 Mustang on the new 331 Stroker. My engine is out at the machine shop and was trying to figure out what I may need to make it fit in my car. If...
  3. dcstang67

    67 Shock tower problem

    Looks like I am right on the money with your measurements. Thanks alot
  4. dcstang67

    67 Shock tower problem

    When welding the braces in place I used a hydraulic ram to push them back out to the towers, Gave them a few hits from a big hammer a to relieve the stress and then welded them. I would like to make sure they are in the right place before I put the engine back in because it will be easier to...
  5. dcstang67

    67 Shock tower problem

    Does anyone know what the distance between the tops of the shock towers on a 67 is? I think they may have been spread out too far while welding the upper control arm braces in place. An even better measurement would be at the upper control arm mounts if you dont have an engine in. I have my...
  6. dcstang67

    Mustangs Unlimited Trunk Carpet Kit

    Thats not the one. That one has some different pieces in it. The sealed bag mine came in said 67-68 coupe on it. The ones I have that are D shaped are much bigger than those. I called MU today and talked to the tech dept and they couldnt tell me anything about this kit except for it being made...
  7. dcstang67

    Mustangs Unlimited Trunk Carpet Kit

    Sorry, but that doesnt help me. I am looking for pictures of the taillight panel area.
  8. dcstang67

    Mustangs Unlimited Trunk Carpet Kit

    Has anyone used one of these kits? I have a 67 coupe. I just got mine yesterday and there are 12 pieces. The package says 67-68 coupe. The description online says 5 pieces. I have 4 that I have no idea where they go. 2 are shaped like the letter D and the other 2 have a contour sewn into them. I...
  9. dcstang67

    powdercoat your headers

    You have to use special high temp header powdercoating. Eastwood sells it and they carry a few different colors. I used it on my daily driver on the turbo manifold and exhaust housing. It held up very well.
  10. dcstang67

    Caliper and 14" Rim Clearance?

    I forgot to mention that any 14" rim will fit with the stock 4 piston caliper.
  11. dcstang67

    Caliper and 14" Rim Clearance?

    If you went with the stock 4 piston setup from a 65,66, and 67 mustangs or cougar all you would need is calipers, around $250 for the pair at Autozone for new with no core, around $70 for dust shields, $40 for the hoses, and the Kelsey Hayes brackets from ebay (they usually go for around $90...
  12. dcstang67

    9" 3rd member color?

    The correct color for an original car is Red Oxide primer
View older results
Top Bottom
Back
Forums
Menu