Search results

  1. jst6

    '05 to '66 wheel fit?

    ok i really like the stock 16x7 stock wheels on the new 05/06 mustangs. any one know what it would take to get one to fit a '66? how big will the spacer need to be? is this jsut a pipe dream to get cheap wheels off of Ebay? thanks in advance
  2. jst6

    odd problem with headlights

    i just replaced the headlights in my 66 with the sylvania ultra white 7" round ($12 each at checker) and now when i engage the brights the right light shuts off. all fuses are good could it be a bad bulb?:bang:
  3. jst6

    x-pipe w/muffs VS. Shelby style side exhaust

    just called around and even Exhaust Works doesn't have a manderel bender n house. it appears no one in az has a manderel bender, at least exhaust shops. gee i wonder how every bondy gets manderel bent roll cages if no one has a bender?!? anyway it's looking like the only way to get this...
  4. jst6

    x-pipe w/muffs VS. Shelby style side exhaust

    i'm looking at killing the 2.25" crush bent pipes under my car. my biggest question is should i save up the $470 for the magnaflow kit or should i just pop the $140 for the shelby style glasspacks to side exit exhaust? loudness really isn't a concern for me as i'm also considering just running...
  5. jst6

    Yes Virginia, you can run a line from your Meziere electric pump to your heater core

    ok why would you want an eletric pump for the heater core and then un it to the engine manifold?
  6. jst6

    anybody have 0.63 overdrive with 4.11s?

    even ur calc shows 25.83"
  7. jst6

    anybody have 0.63 overdrive with 4.11s?

    I checked your tire size in you signature, and the size would be 25.82" diameter. with the .63 od and the 4.11's you should see just over 2500 rpm's at 75 mph. that's better than my old ford ranger pu would do. it was at 3300 at 75 mph.
  8. jst6

    Gear chart is up....

    its not data, its not subjective anecdotal information. It is cold hard mathematical CALCULATOR. It is good for any year, make, or model. All you need is the transmission ratios, gear ratio, and tire size.
  9. jst6

    Gear chart is up....

    Tire, Transmission & Gear Combo, and 1/4 mile calculators in MS Excel I made this using the standard functions for quarter mile estimates, outside tire diameters, and transmission and gear ratios to find final drive and cruising speed for any combonation you like. if you want to save the...
  10. jst6

    HELP! (upper control arm swap)

    well mine were really stuck. since i was replacing the ball joint anyway i used a pickle fork and an air hammer. i tried the bfh tool, after 3DAYS of pounding i borrowed the neccessary air hammer and air compressor. took 5 seconds each joint!
  11. jst6

    TCP power R&P now only 2500

    an old bible story... lazarus was a close friend of Jesus. Lazarus died and Jesus waited four days to see his body. He waited four days becuase at that time someone was considered completely dead after three days. so the fourth was to make good and sure he was gone. Jesus resurected Lazarus...
  12. jst6

    Disc Brake Conversion ?

    i got mine from mustangdepot.com out of las vegas. they didn't have it in stock so the had ssbc mail it to me directly. the kit was complete except for one fitting that i had to find an adapter for. one tip: buy GOOD tubing wrenches, ie. not the checker special but snapon or matco. i bent...
  13. jst6

    Have you guys with expensive wheels seen these locks?

    the only prob i see is that locks can be picked, quickly. if it has a cylindar lock rather than a straight key i would be more apt to buying something like that.
  14. jst6

    DSS 347 Longblock ... reasonable price?

    i've been doing some research also with machine shops here in tucson. it seems the internet companies charge alot more for their stuff than the local shops do and i don't have to pay shipping. they basically told me that i tell them what parts to get or bring them the parts i want and they...
  15. jst6

    Track Lok Vs. LSD Vs. Detoroit Locker

    only problem... i can't find a tru-trac for an 8" and i just dont want the 9 oh well locker here we come, thanks guys
  16. jst6

    Track Lok Vs. LSD Vs. Detoroit Locker

    Ok, I know how the DL works: Straight cut gears that mesh in and out during corners and lock up fully while going straight, they're loud and aggressive. I know how LSD works: clutch packs that try to deliver power on the straight to both tires but are easier on the ears in the corners, with...
  17. jst6

    What next? Brake Question

    the reason i did the ssbc brake kit was b/c my master cylinder went out. i had the brakes pro bled by a machine and the pedal would still sink to the floor. the mc will go out before the wheel cylinders. i'd replace the mc and go from there.
  18. jst6

    Oil pushing, any road racers on here?

    the problem is not the oil pressure from the pump or the windage tray, drag racers experience this problem also. there are some kits that take care of the crank case pressure that pushes the oil out of the motor (usually thru the pcv valve). Moroso makes one that is inexpensive that installs...
  19. jst6

    Free Online Drag Race Game

    Drag Race Game found this cool drag race game. if you use the tuner mode and choose your ricer and complete the first set of tournements (all heads up) you can get to the second level and buy a 69 shelby with of all things a 426Hemi !! best time with the shelby was an 8.38 on full No2.
  20. jst6

    Amp/Stereo install question

    no don't use 18AWG wire to power an amp;) hes saying the ground from the amp should be no longer than 18 inches, the ground needs to be as close to the amp as possible. i would use minimum 10 AWG preferably 8 AWG if you can bite the extra expence. another tip to get your power output up...
Top Bottom
Back
Forums
Menu