Search results

  1. PNY PWR

    Motor Mounts/Tranny Mounts

    Really? I'm never surprised by how crappy the stock stuff is :p
  2. PNY PWR

    I joined the 5.0 family!

    cool Capri, welcome and congrats
  3. PNY PWR

    differential shims

    You really need to set the backlash correctly just in case, but you need the tool for that. A mech. did mine so I don't know what amount of shims were where. the one you're talking about probably came from the right side.
  4. PNY PWR

    differential shims

    From whichever side needed shimmed
  5. PNY PWR

    Serpentine Belt Replacment Question

    Not sure what the exact difference (I assume length) is but pretty positive you have factory a/c
  6. PNY PWR

    Cruise control in the ashtray mod

    Thanks Hissin and no problem, that's what we're all here for
  7. PNY PWR

    Motor Mounts/Tranny Mounts

    there's the main mount for the tranny to crossmember and there's bushings for the crossmember to frame. crossmember to frame motor and trans mount kit
  8. PNY PWR

    Cruise control in the ashtray mod

    I got it installed today, it works great. On the safety issue....The buttons are all shaped different so you don't have to look at them to operate the cruise. I test drove it and it's easier to operate than the stereo. I'm pretty happy with it, I'm like Hissin, I can't stand dead parts...
  9. PNY PWR

    Motor Mounts/Tranny Mounts

    I agree
  10. PNY PWR

    Cruise control in the ashtray mod

    Thanks...Yeah, the wires are right there on bottom after you remove the covers. It's kinda strange, there's only 3 wires, the horn and all CC functions operate through them. Those CC buttons are funky shaped, took me a bit to come up with a decent place to put them. It's a good spot, they're...
  11. PNY PWR

    Wiper blade humps...any ideas?

    You putting in refills? I just buy the whole blade, snap it on and go. Just put new Anco's on the other day. My best freind lives in Spfld. I lived there for about 5 years. Spent an entire year of my life street racing my old 91 LX 5.0 vert. around there, especially down at last light. Ah...
  12. PNY PWR

    My 331 Kit is here =)

    Sounds sweet, should run like a bastid :nice:
  13. PNY PWR

    Afraid to boost, am I nervous over nothing?

    There's a guy down in power adders threads building up a L s/c'd 5.0, you might head down there and check it out. He's fabbing adapters and such. The boost doesn't hurt the 5.0's so I wouldn't assume it would hurt the 5.8's
  14. PNY PWR

    Remove side moldings?

    The farthest forward and rear bolt on and are plastic like said above. The other are rubber and stuck on. Above mentioned methods work well for removal. It is best to remove the metal backing before reinstalling so they will not be wavy. Good Luck
  15. PNY PWR

    Cruise control in the ashtray mod

    I replaced my airbagged and cruise control equipped stock steering wheel a while back. I started thinking that i wanted to keep the cruise control. I've hooked it up and tested the switches via the wires in the column , bypassing the old setup in the stock wheel. I was able to use the horn...
  16. PNY PWR

    Looking for electric fan...

    SN95, Taurus, Black Magic, Proform to start off
  17. PNY PWR

    Trick Flow kits

    I'm thinking about getting one of these kits along with a fresh rebuild .030 over. Which would be a better choice? Track heat engine kit EFI engine kit I plan on going with larger TB, MAF sensor, and injectors as well. What sizes would work best?
  18. PNY PWR

    4.9 tech

    I had a FI 4.9 in my old 87 4x4. What a great motor, tons of miles, abused, brioken, and still went. I've heard about modding them and some hipo parts are made for them. It didn't rev real high but had gobs of torque. Drain plug broke one time and I ran it quite a bit w/o oil. Just broke off...
  19. PNY PWR

    ! ! ! Beautiful - check it out ! ! !

    Religion is so sad
  20. PNY PWR

    ! ! ! Beautiful - check it out ! ! !

    Thanks for the free post Jesus, now go die for my sins again or something.