Search results

  1. 8

    What Should I Use

    What should I use for The cork end pices for the lower intake gasket Last time I used the cork ends coated with silcone, and it leaked,, [after a while]
  2. 8

    Bearing Clearance

    per Federal Mogul,-- 6 thousands per every inch of bore, so for a 5.0 24-26 thousands
  3. 8

    Bearing Clearance

    Good point
  4. 8

    Bearing Clearance

    Thanks !!!!
  5. 8

    Bearing Clearance

    What range of rod and main bearing clearance do I want, on a HCI 5.0 with 10psi of Vortech Thanks stock short block
  6. 8

    Engine 11 Mpg?

    I dont want you to feel bad ,but, We drove my wifes 89gt aod mustang to the Woodward dream cruise. The car has edl heads ,stock cam with 1.7,s headers, cobra intake 70mm throttle body and 70mm mass air, stock 19lb injs,s 2800 NON lock up converter and 410 gears. The car was turning 2800 rpm at...
  7. 8

    400 Mile Trip With A 2800 Conv?

    I dont remember why, I did it maybe 7 years ago. it was that pink [Stallion ? ] converter,
  8. 8

    400 Mile Trip With A 2800 Conv?

    Do you think my car will be ok? I have an 89 mustang HCI , 2800 [pci] converter [non lock up] AOD car with 410 gears. No trani cooler, but I did put a 3 core radiator in it, now can I drive 400 mile to the Michigan dream cruise? or will it hurt my trani? also it is spinning about 2700 rpm...
  9. 8

    Engine Vortech Sc On Stock Fox Long Block

    yes,,, Vortech said my kit would give me 8psi, My car has power pipe and I have 10 psi, plus the hose that vortech gives you, allways riped on me
  10. 8

    Where Can I Buy A

    yes on a naturaly asp motor the stock air box is fine, and I dont know if I want to sell my original one
  11. 8

    Where Can I Buy A

    the car has a Vortech on it with a power pipe
  12. 8

    Where Can I Buy A

    When you remove the stock air box on a fox body, it leaves a oval hole in the iner fender, does anyone make something to pluge the hole? Thanks!!
  13. 8

    How Much Is My Stock Mass Air Hurting Me?

    does it have to be a pro-m? I have an 89 gt aod with edl heads ,cobra intake,b 410 gears , stock cam with 1.7s and stock mass air and 19 injs
  14. 8

    How Much Is My Stock Mass Air Hurting Me?

    That would be awesome
  15. 8

    How Much Is My Stock Mass Air Hurting Me?

    What would the shipping costs be to ship to Ohio 44903 zip? Thank you!
  16. 8

    How Much Is My Stock Mass Air Hurting Me?

    I see
  17. 8

    How Much Is My Stock Mass Air Hurting Me?

    where are you located?
  18. 8

    How Much Is My Stock Mass Air Hurting Me?

    STANGNET ROCKS To me I dont know if it is worth the small horsepower gain, the car starts and idles like new. So is it worth 5hp to mess with it?
  19. 8

    How Much Is My Stock Mass Air Hurting Me?

    What about a 93 cobra mass air meter, would it be a direct swap to mine , with my 19 lb injs,s ?
  20. 8

    How Much Is My Stock Mass Air Hurting Me?

    I have an 89 GT with 2800 stallion converter, cobra intake, edl heads, stock cam with 1.7,s - 70mm throttle body, 410 gears, and a stock mass air meter with stock injectors. How much do you think I would gain with a bigger mass air? THANKS!!!
Top Bottom
Back
Forums
Menu