Search results

  1. nhra427

    12" w3 box question

    Had 1 12w3 in a 1cf sealed box and it pounded. sealed will sound better
  2. nhra427

    REM: Can't find where to wire it...

    there is a wire from the head unit to hook it to
  3. nhra427

    amp mount

    untill i started to change amps i had all my wires run under the rear fenderwell covers. if you run under the rear seat then up under the plastic fenderwell covers they will come out right at the package tray. Then strap the wires to the package tray. put the wires in a plastic loom and you...
  4. nhra427

    amp mount

    what i did was buy some 3/4 square aluminum stock and build a rack to hang from my package tray. Im in the middle of changing amps but here is a link to my car on sounddomain MY CAR
  5. nhra427

    Called Landmark they have a FORD GT on display as of yesterday

    I went and checked it out at kendall but the wouldnt trade me straight across :rlaugh:
  6. nhra427

    Connecting to fuse

    Not to cause problems but you should size your fuse to the wire you run from the battery to the amp. The amp should be fused somewhere on it for the amp. Hate to see someone run a 12 gauge wire and fuse it 50 amps or so. 1hotz is right about how much the amp will need so run a wire that will be...
  7. nhra427

    Trunk Ideas

    I have heard to stay away from mounting amps on sub boxes because of vibrations. dont know if thats true.
  8. nhra427

    Many ?s, new HU and subs

    as far as the factory spot under the deck get a pocket. They came from the factory with the base stereo. they fit from 94 and up and they just pop in and gives you a space to put things. go to some local shops they should have pre fab boxes and with a 10 it shouldnt be hard to get one to fit...
  9. nhra427

    Had question about Infinity Kappa speaker install...

    Infinity speakers dont have alot of bass at all. I have a set of them in my garage because i tryed them and replaced them because of that reason. Did you have the amp installed at the same time? The crossover that he was talking about is on the amp. takes out the very lows. change the settings...
  10. nhra427

    choosing the right amp

    you can always get a amp thats rated more then the sub. Im running a 500w mono amp to a 350w sub. Here is a amp that would work good but i dont know your budget. AMP
  11. nhra427

    Show off your system!

    Its a pre fab box. I got lucky getting that one
  12. nhra427

    Show off your system!

    You can see mine here. But im not even close to being done. In the middle of changing amps and I have everthing temped in. but you can get some what of an idea. MY Car
  13. nhra427

    Where to get Alternator Re-Wound

    with the amps you have in your sig it shouldnt be that taxing on the charging system. I would start with a new battery. One thing to do is while the car is running and the stereo up check your voltage with a DMM at the battery, that will tell you how the alternator is doing. also i see you have...
  14. nhra427

    Need help with bypassing in dash amp

    what i did is to just run new wires and not use the stock amp. run new wires that are 12 gauge and it will be better with the bigger wires
  15. nhra427

    So ... new HU in Mach 460 on a 99 Cobra and yes I've used search

    When you install a aftermarket deck you use the speaker outputs on the deck to hook up to the stock amplifiers. The stock amps dont have rca inputs just speaker level inputs. The wiring harness adapters will work that you listed and there should be a diagram with the harness kit. Its real...
  16. nhra427

    Looking for a sub/amp setup on a budget...???

    Instead of one set of inputs there are 2 on the sub. you will need to hook both of them up for it to work. You would want to hook them up so you get a 2 ohm load for the amp because that way you get the most power out of the amp.
  17. nhra427

    Subs + Amp help!

    Here is a amp that i see alot of people using thats not a bad priceAMP Here is a sub i use to run and they work great SUB I would start with 1 good sub rather then 2 so so subs and if its not enough then get another.
  18. nhra427

    Subs + Amp help!

    I run 1 12" sub and it hits hard. Im running a image dynamics IDQ12. Most of the time 1 sub is all you need. It would be easier to help if we knew a budget. If you want a sub youll have to have a amp. The subs you have talked about wont do much IMO. I would check out sounddomain.com...
  19. nhra427

    Opinions on 12" sub for a sealed 1cuft box

    talking about setting the gains so that you dont have clipping going to the speakers.
  20. nhra427

    1/2 MDF versus 3/4 MDF for sub box...

    My box is made from 3/4 mdf. I think it might have something to do with what sub and how much power you have to the size of the MDF. With some of the real powerhouse subs i have seen them use 1" for the face to hold the sub. I wouldnt go any smaller the 3/4 for the face.
Top Bottom
Back
Forums
Menu