Search results

  1. T

    Okay, electrical problem got me stumped

    The dimmer next to the headlight switch must be turned up past the detent. Roll the dashboard dimmer back a little to get it off the detent and the interior lights will go off. If they don't then try turning them off manually. Do this with the car running and the doors closed to ensure that...
  2. T

    Getting Lowered Tomorrow

    Sorry to hear about your disappointment. A couple of things to check as you have already noted the bumpstops. For the clunking I'm gonna sound like a broken record but did he use a grease gun on the LCA's because he could have possibly split a bushing but the most probable cause is an exhaust...
  3. T

    NEW HERE - any one use this gauge pod/guages... opinions??

    Yes when I say the finish I mean that the SOS pillar is finished to look like the rest of the interior including the texture and color. They also have a triple pillar pod and are in the process of developing a center pod. The CDC center pod is very nice however it doesn't come color matched...
  4. T

    NEW HERE - any one use this gauge pod/guages... opinions??

    The finish on that pod looks just as bad as the finish on the autometer pods. I prefer the Speed Of Sound pod myself. http://www.speedofsoundllc.com It starts off with a genuine ford pillar and they add either the 2 or 3 pods to them. They even have provisions for adding the Raptor shift...
  5. T

    Anyone put a shift light in the new stangs yet?

    Checkout http://www.raptorperformance.comand also http://www.speedofsoundllc.com
  6. T

    Need a Clutch Kit/Flywheel/driveshaft setup

    Hey Anthony, The way he answered the question is misleading. It says that he is the only one running the RST then he goes on to say that there are a ton of people running the street twin with no mention that it is not on S197's. It is of no use to us if the street twin is being used on...
  7. T

    Need to know how to adjust the front sway bar with adjustable end links

    Adjust the endlinks so that the swaybar is level when the suspension is loaded. Adjustable endlinks are used so that regarless of the ride height of the springs being used the swaybar is level and can do it's job properly. Make sure that the rod ends do not bind throughout their travel by...
  8. T

    Need a Clutch Kit/Flywheel/driveshaft setup

    I know quite a few people on many different boards and I haven't heard of one person using the street twin on an 05+. There isn't even a listing for the S197 so how can there be a ton of people running them? What's the part number for the street twin to be used with the S197? You cannot use...
  9. T

    Superchargers and the Cruise Control

    I agree with Mr. Q. The throttle parameters could be adjusted to make the car feel either linear or to have a gentle tio in for the first 1/4 to 1/2 throttle. As for the cruise control issues I would do a search on surge and Kenne Bell since they had the same problems. There is an orifice...
  10. T

    NEED HELP URGENT!!! MY MUSTANG'S COMPUTER HAS GONE MAD!!!

    Many people have had leaks in the cowl area dripping water onto the SJB.
  11. T

    Need a Clutch Kit/Flywheel/driveshaft setup

    Not to take anything away from McLeod who makes many great clutches but people want combinations that work the first time out. There are not many people running the McLeod yet and as you have stated the RST is still in the prototype stage. I'm at 500 rwhp at the moment and I know a few who...
  12. T

    Need a Clutch Kit/Flywheel/driveshaft setup

    Centerforce D/F clutch latest revision with only 9 weights. Fidanza Aluminum Flywheel. Must install new dowel pins supplied with the Centerforce clutch. The Fidanza flywheel will save you $300.00 over the comparable Centerforce unit. I have over 300 runs on this combo with the last 125 being...
  13. T

    Opinions on Intakes please.

    Get the C&L with the no tune adapter. This way when you decide later that you want or need the increased flexibility of a tuner you will already have an intake that can take advantage of this. http://www.cnlperformance.com/notune.html
  14. T

    "Stock" GT in the 12's.

    I run 11.427 on a stock 05 motor with a saleen blower:lol: The use of the word STOCK and 4.10's in the same sentence is ridiculous to say the least. I ran 13.65 bone stock on factory tires, 13.25 with C&L intake and Diablosport tune and 12.95 with the above mentioned and drag radials. Could...
  15. T

    whats a good drag wheel?

    Weld does make a 17" wheel. The problem is that they cost $650.00 each. I want to go with the bogarts which are $1600.00 a set of 4 in 15" but the swaybar must be relocated and they may need longer studs.
  16. T

    4.30 too big for supercharger?

    I'm running 4.10's and a S/C. I'm a track junkie with 800 1/4 mile runs on my car so the 4.10's combined with a 26" tire has me crossing the traps at 6300-6400rpm in 4th. If I wanted to put power down on the street I'd probably go with a 3.73 of not the 3.55. Our cold weather up here makes...
  17. T

    important...how much will it handle?

    It's a typo 3680 lbs. I'd be a multi-millionaire if I could figure out how to get that much weight out of these cars:p
  18. T

    Trouble Code Help "P0690"

    This DTC sets when the PATS system indicates the key is in the OFF,ACC or LOCK position and the ignition switch postion run circuit indictaes ON or Start position
  19. T

    important...how much will it handle?

    I'm one of the guys matt is talking about. I haven't even had the car on the dyno yet but with a 1/4 mile time of 11.427 @ 119.92 at a race weight of 3680 lbs. my estimated rwhp is in the 490 range. My car sees the track between 2-3 time s a week with an average of 12 runs each time. I'm...
  20. T

    recomendations?

    Bolt on a Saleen S/C with the JDM Engineering Stage II kit. You'll be near 475 rwhp so you'll have a fighting chance.
Top Bottom
Back
Forums
Menu