Search results

  1. squeeeg

    10 questions for u guys...

    1. Why are you worried about changing your suspention. You are talking about it in your other questions anyway. Also why would you want a new one without changing suspention. 2. I don't remember but wherever you buy them from will know. It also depends on what size wheel you buy, 3...
  2. squeeeg

    What do I need to be GT???

    When you are installing them make sure they are in the right place. Remember you are drilling into the body to mount them. Also put something in the holes to prevent rust.
  3. squeeeg

    Will this work?

    I am pretty sure that they will rub bad. At a minimum you will have to remove your quads and roll your fender.
  4. squeeeg

    Couple valve spring questions

    What size are the stock spring? Does anybody know?
  5. squeeeg

    Where to get speedo gear?

    To get your speedo to be correct with those 4.30's you are going to need a 21 tooth speedo gear and you are going to have to drop to a 6 tooth drive gear as well. This will be the most accurate for you. 93GTosu - you are going to have to get your speedo recalibrated to get it correct with it...
  6. squeeeg

    Couple valve spring questions

    Nobody can help me? Hate to be a pain but i want to place this order.
  7. squeeeg

    Couple valve spring questions

    First of all what size valve springs for stock heads. I am putting a cam in my car and am getting new springs also. Secondly, when replacing the springs what parts (ie: seals, locks, retainers, ect) can I reuse and what do I need to get new. Any help or advice would be great.
  8. squeeeg

    broken door handle

    I went with bots as well. I couldn't get ahold of a rivet gun large enough to handle the rivets for this. It is a real easy thing to do. Not something that you send out to a shop.
  9. squeeeg

    Mobil 1 ATF in PS pump?

    Use what is recomended. If you use the wrong stuff it will cause leaks. I don't know what type of fluid mobil 1 is, ask you local autoparts store they might know.
  10. squeeeg

    Does anyone have this MustangTuning radio/hvac relocate plate?

    I really like that. I think I am going to try to make my own. I don't want to pay $88 For something that I can make on my own.
  11. squeeeg

    Gears??

    I have 3.73's and 5 speed and it doesn't rev out to much. 1st gear is kindof short but you get used to that
  12. squeeeg

    The "CAI" is NOT a "performance" modification.

    This thread has almost out of control. I Like the was CAI's look. I am planning on getting one with my new intake just for the looks.
  13. squeeeg

    What weight of Mobil 1 do you guys use?

    I use 15-50 because that is what the guy before me used. I am thinking about going to 10-30 or 10-40 for my next change.
  14. squeeeg

    Re-Invite to MichiganMustang.com

    I'm already there, as you know. But everybody else should definately come over and check it out.
  15. squeeeg

    what kind of sprak plugs do i get?

    I run autolites also. I buy mine at wal mart. They are less then $1 each
  16. squeeeg

    are the cats required on daily driven cars

    Technically they are required on every car that came from the factory with them. But on the other hand nobody except emissions stations and 1% of all cops actually looks for then on your car. So if emissions isn't a problem then i would get rid of them.
  17. squeeeg

    help me choose between two cams

    From what I understand, and I am sure I am not 100% right, but here it goes. Duration is how long the valve is open. This is what actually created clearence issues with a cam. Lift is how far the valve itself opens. the numbers are in the order of intake/exhaust for each measurement. Cams...
  18. squeeeg

    In case you were curious. I weighed my stock heads vs my new FRPP Y303 heads.

    wowo i didn't realize that stock weighed that much. That is a substantial loos on the front of your car.
  19. squeeeg

    Hood Flew up while driving....How Do I fix it?

    The hood is going to need to be replaced, as well as the cowl. The metal parts around the cowl unfortunately isn't something that you can buy. You are going to have to go to a body shop for that part. It isn't a cheap thing to fix, sorry.
  20. squeeeg

    Extra clutch in diff???

    I did it on mine. I don't really know if it made a difference as I have never before this one driven on a working traction lock. But I will definately burn them both after I changed that.
Top Bottom
Back
Forums
Menu