Search results

  1. I

    Shaker on a 65/66?? Anyone ever do it?

    Don't think I've ever seen this done
  2. I

    SERPENTINE belt conversion

    Kelton, Is that your 65 or 68??
  3. I

    Engine balance question

    Thanks all for the info. Thehueypilot, thanks much for the verification with Ford racing. I believe it is a Windsor. The intake and distributor I bought and installed were for a windsor. Are these interchangeable with an M motor?? I think an M barely fits between shock towers also.
  4. I

    Engine balance question

    I'm So Confused!!!!
  5. I

    How many 65 66's are left ?

    I have 1 65 fastback
  6. I

    Engine balance question

    So later 351's were 50 OZ imbalance?? Does anyone know what year this started?? The engine was replaced in the 84 donor van so it could have been another year.
  7. I

    Engine balance question

    Thanks, guess I'll try another balancer.
  8. I

    Engine balance question

    I installed a 351W in my 65. It has a vibration that is definately from the engine. The motor came out of an 84 Van but was not the original motor. (carburated)I drove the van before pulling the motor and there was no vibration noted. My car is a stick and I used the original 28 OZ flywheel and...
  9. I

    Ride height question

    Can anyone tell me the original ride height of a 65 and how it is measured?? Thanks :shrug:
  10. I

    How much clearance?

    I would check with someone who knows about the strenth of those spacers before you have them cut if you plan to use them as they are with the studs. I just had mine machined to 1/2 inch, but used longer studs thru the OE hub and slid the spacer on. I used the holes in the spacer that had the...
  11. I

    Clutch Cable Conversion?

    I've got Mustang Steves cable kit. Excellent !!!
  12. I

    Rear spring mounting ????

    Yeah, that's what I thought too. The top of the spring does have a nub on it, but the center of the spring perch is recessed, so the nub does nothing. I guess if all is as it should be, nothing to be concerned about.
  13. I

    paint

    Is that picture after crash / repair???? Looks perfect!!
  14. I

    Rear spring mounting ????

    No , I meant the left rear wheel was more foward than the right. Loosened the u bolts, pryed the rear end rearward and now it's even.
  15. I

    Rear spring mounting ????

    What bothers me is I intalled the springs, tightened the u bolts evenly, lowered the car and the rear appeared a bit crooked. Raised the car again, loosened the u bolts moved the rear a bit, tightened the ubolts and all looks fine. It just seems to me that there should be more to centering the...
  16. I

    Rear spring mounting ????

    I installed new rear springs on my 65 and found that there were no insulators at the spring to axle tube mountings or between the shock mount and spring. Should there be??? I would think there should be more than just the thru spring bolt protruding into the shock plate to keep the rear from...
  17. I

    Quick Q - Front Baer Track increases "track"?

    No one likes you. Not even Historic, :)
  18. I

    Help with monte carlo bar

    U should b able 2 find flush type bolts with a torx or allen hole in them.
  19. I

    Boss 302 engine locked

    It's a boat anchor!! I told him to put a small block chevy in it. :)
  20. I

    Boss 302 engine locked

    A friend of mine has a 70 Boss 302 that has been in his barn for about 12 years. Car ran fine when parked. We tried turning the motor over with a breaker bar and socket on the dampner but it won't budge. He put mystery oil in the cylinders and left it for a few days and tried again, no luck. Any...
Top Bottom
Back
Forums
Menu