Search results

  1. G

    1965 Mustang Fastback for future project & sand blasting discussion. Anyone welcome to input

    Yeah, my Lindsay has the flat plate with the valve. I may simplify it making a plate with a 1/2" pipe bung attached and plumb it like the Econoline and see if it works. No moving parts. Yesterday I was looking at the Econoline plumbing to copy it. I can take pictures if anyone is interested...
  2. G

    1965 Mustang Fastback for future project & sand blasting discussion. Anyone welcome to input

    That Lindsay valve is just like mine that is wore out. How much are they? The way the blaster is designed in the illustration is how the big Econoline cabinet's pot works. Sand drops out of the tank/pot into an airstream. Simple but effective. ADDED: I just checked Big A's Place and the Lindsay...
  3. G

    1965 Mustang Fastback for future project & sand blasting discussion. Anyone welcome to input

    Aeroil.
  4. G

    1965 Mustang Fastback for future project & sand blasting discussion. Anyone welcome to input

    At work, we have a huge pressure washer that we acquired 1.75 years ago. It has a very large electric motor, a heavy cord is on it that looks like a welder power cord and the pump looks like a pump that would be used in a self-service jet-spray car wash. It also has a diesel or kerosene fired...
  5. G

    1965 Mustang Fastback for future project & sand blasting discussion. Anyone welcome to input

    I found mention in a 1965 ag College document that Glen Piland Company in Bakersfield CA was making liquid fertilizer injection devices for irrigation systems. I think that the valve that may be missing is not creating a pressure differential that it needs. As in the tank needs about 20 to 30...
  6. G

    1965 Mustang Fastback for future project & sand blasting discussion. Anyone welcome to input

    The black hose on the left of the Econoline is the blasting hose. We've discussed pulling that hose out and run the Lindsay hose in just to be able to do some cabinet blasting until the Econoline is fully functional. Yeah, you may be missing a ball valve on the big unit. On my Lindsay the water...
  7. G

    1965 Mustang Fastback for future project & sand blasting discussion. Anyone welcome to input

    What is the brand name of that blaster?
  8. G

    1965 Mustang Fastback for future project & sand blasting discussion. Anyone welcome to input

    Added pics to post #3.
  9. G

    1965 Mustang Fastback for future project & sand blasting discussion. Anyone welcome to input

    The portable unit is a Lindsay 35 pound pressure blaster. That is not big enough to hold a whole 50 pound bag. It runs out about the time to stop and refill while the 7 hp 60 gallon compressor catches up. We have a second comparable old Sears compressor that we are trying to find rebuild parts...
  10. G

    1965 Mustang Fastback for future project & sand blasting discussion. Anyone welcome to input

    ADDED: 3-7-24. After disassembly of your rusty antique Mustang, sandblasting/mediablasting is one of the first things that needs to be done to be done. Jim, Thanks for your reply back. I started this thread so that I wouldn't be stepping on Jim's thread "A new fb conversion for bbettto". It will...
  11. G

    Progress Thread A new FB conversion for bbettto

    I'm looking at post #81 and #82 at the fastback roof structure completed. I have a 1965 fastback body that the bottom half of it is rust out rotten. If I want to install the fastback structure to the coupe, the same way that you have joined the new parts to the coupe donor, it looks like I would...
  12. G

    A 67 fast back conversion for Mrs. bbettto !

    In response to post #8, last picture, I have wondered about using a rosin based flux to dip the panel spotter tips in. I just started serching and came up with this. When we were using our old PanelSpotter, we always had the tips sticking. I'm currently trying to find new tips for it. So far, no...
  13. G

    Progress Thread A new FB conversion for bbettto

    Looking good. In post #51 when you are installing the trunk divider, Are there alignment marks up top? I see that the bottom rests on the trunk floors?
  14. G

    Progress Thread A new FB conversion for bbettto

    It has 2 hand held electrodes and one has a switch. You press down in two prepped spot and hit the switch. It makes 2 spot welds at once from just one side. The dial on the front is to set the duration of the weld. You set it by test welding with metals of the same gauge.
  15. G

    Progress Thread A new FB conversion for bbettto

    Where did you purchase your hole punch and what size holes does it make? I'm looking for a pinch weld attachment for our old Lenco Panelspotter. Last time that I located one it was over $600-. file photo
  16. G

    Spent 3 hours trying to figure out converting my jelly jar M/C to a dual reservoir M/C on my a-code '65 disc/drum

    @1320stang Is that your mid eighty's Crown Vic 5.0?
  17. G

    Progress Thread A new FB conversion for bbettto

    Consistent as always.
  18. G

    WTB/Trade Looking for someone in the midsouth US dismantling SN95s (2003-2004) to be particular

    I'm looking on here for someone in the mid-south US that is parting out (carefully dismantling) a 2001 to 2004 Mustang. I need a complete powertrain harness. Preferably a V-8 harness. Reply to this thread if you have credible information.
  19. G

    Which is the best thread to find someone parting out a SN95 (wiring)

    I'm looking on here for someone in the mid-south US that is parting out (carefully dismantling) a 2001 to 2004 Mustang. I need a complete powertrain harness. Preferably a V-8 harness. Please direct me to the appropriate section or to an individual doing such.
  20. G

    WTB/Trade Wanted: Moates Quaterhorse device

    SOLVED (No way to make the title say such where it says WTB/Trade) (edited 01-06-24) Does anyone have an old Moates Quarterhorse, a working one, that they are no longer using that they would like to sell? Thanks in advance.
Top Bottom
Back
Forums
Menu