Search results

  1. 1FatPony

    Quick Question!!!!!!

    where is the fuel pump relay?
  2. 1FatPony

    Quick Question!!!!!!

    I am trying to get my car smogged today but now the fuel pump will not turn off. When the ignition is off and the key is out the pump is still going. There is also a hissing sound in the fuel lines in the engine. How do I fix this???
  3. 1FatPony

    Failed Smog...

    $15 for smog??? The cheapest I have found in Cali is $40 and thats 1 test only. There are a few that charge $57 for basically 2 chances to pass. Im going to pic up the sticker and/or filter from a friend and try it again today.
  4. 1FatPony

    Failed Smog...

    no. The guy said he would fail me not matter what because of those small things.
  5. 1FatPony

    Failed Smog...

    my friend has an intake and sticker that Ill borrow.
  6. 1FatPony

    Failed Smog...

    could I just print this out http://www.knfilters.com/search/product.aspx?Prod=57-2501 to say that it is CARB legal?
  7. 1FatPony

    Failed Smog...

    could I just print something off the internet saying that the K&N intake I have is CARB legal?
  8. 1FatPony

    Failed Smog...

    I went to get my pony smogged today and the guy was pretty nice. He told me that my K&N filter was an aftermarket filter and I needed to have the legal sticker with some emissions legal number or the original filter. He also said that I couldnt pass with the check engine light on. It only comes...
  9. 1FatPony

    Whis is this wire/connection???

    I somewhat fixed the ignition. There seems to be a bad connection with the clutch electrical crap. When it was running and i when i was driving it, it seemed to bog when my foot was slightly on the clutch and in gear. But when the clutch was in the engine was fine. When the engine was off i...
  10. 1FatPony

    Whis is this wire/connection???

    yea I remember touching it up to the ignition and the chime going on. It also goes on without it though. Should I be able to start the car without this??
  11. 1FatPony

    How do you remove the ignition cylinder???

    I knew you had to turn it someway to get it out. I jsut drilled the little notch out and it came right out.
  12. 1FatPony

    Whis is this wire/connection???

    oops forgot
  13. 1FatPony

    Whis is this wire/connection???

    I found this handing from my steering column. Looks like it is suppose to go into my ignition cylinder. But i tried to fit it somewhere in there and it doesnt seem to fit. My ignition also doesnt work. Whenever I turn the key to turn the engine on all I see is the check engine light. i replaced...
  14. 1FatPony

    Steering column/ ignition problem...

    So i bought a steering column on ebay with the ignition stuff on it and for some reason it is different than my 87 column and ignition. They are both tilt and the guy said it was for an 87-89. The differences are that the steering wheel bolt is a nut that screws onto the main shaft while the...
  15. 1FatPony

    How do you remove the ignition cylinder???

    I am trying to remove the ignition cylinder and I dont have the key for the ignition either. How do I do it? It seems like the little bump on the side is stopping it from comming out.
  16. 1FatPony

    MAP/BARO question

    okay thanks guys for the info. Ill go to the juckyard tommorow to see if I can find one of those sensors. Will it matter which one I get? as long as the vaccum port is open to the atmosphere?
  17. 1FatPony

    MAP/BARO question

    is this the connector??
  18. 1FatPony

    Car not running right

    So this morning I drove the stang for a little bit and it seemed to run fine. I fixed my 41 and 91 codes and tweeked the distributor and some other things. I just drove it again and it was bogging whenever I started off in low rpm. I dont think it was because I was in too high of a gear because...
  19. 1FatPony

    MAP/BARO question

    So I am getting code 22 and I checked to see where my sensor is and it looks like I dont even have one. Is that even possible? My engine runs fine but I heard that it wont run unless you have this sensor. I have an 87 GT that was converted over to MAF. Is it possible that I dont have a sensor or...
  20. 1FatPony

    O2 sensor problem codes 41 and 91. *pics*

    The car was converted over to MAF so which one should I get??
Top Bottom
Back
Forums
Menu