Search results

  1. MineralgreyGT01

    Worrie bout my Timing Help please!!

    Well I believe that the crank pulley can only be put on one way if they are the non piggy back version due to the keyway on the crank. And check your instructions that came with your T/A, I think the Steeda adjuster is 1 degree off from what is indicated on the ring. As for A/F if you haven't...
  2. MineralgreyGT01

    What is the best way to weld cats into a O/R h pipe?

    Maybe I miss-spoke, whatever rod is reqeired to weld stainless steel together :) I figured if the pipes are stainless and the cats are stainless then the rod should be also?
  3. MineralgreyGT01

    What is the best way to weld cats into a O/R h pipe?

    I am going to have a weld shop do it with stainless steel rod. I got the O/R H originally because that is what I wanted at the time but I didn't like the 2000-3000 rpm 'Blat sound' that comes with them (didn't realize it at the time). I never got used to it so now it is sitting in my garage...
  4. MineralgreyGT01

    What is the best way to weld cats into a O/R h pipe?

    I am going to weld some cats into my MRT H pipe and I was wondering what the best method for doing this is. Currently the pipe is off the car. I was thinking of scribing a line down the center of each pipe where the cats would go and also down the centerline of each cat, line up the scribes...
  5. MineralgreyGT01

    help with prochamber install

    Heres a post I made last fall when I did mine. Good Luck http://forums.stangnet.com/showthread.php?t=368370
  6. MineralgreyGT01

    Resonator on Mach

    I believe the only reason it is on there is to satisfy the external radiated noise people in Washington. It dilutes some of the intake velocity noise. Taking it off should only slightly increase the incomming air sound (ala CAI sound). No performance increases. Plus you can see more of the...
  7. MineralgreyGT01

    messed up the car

    The computer is inside the car. I would check around your COP's to make sure water did not get around them and your spark plugs. They have been known to cause problems for people who spray their engines down to wash them (rough idle, won't start) stuff like that.
  8. MineralgreyGT01

    PartShopper Beta Site - 5% Coupon for 4.6 Members

    Well the new system works great ! I ordered my Magnapaks on Monday and they arrived here today. Very fast service. The only small glitch was the website did not update status beyond sent to warehouse. I called yesterday and Mike was glad to explain the new system to me. Look for further...
  9. MineralgreyGT01

    best avatar?

    I liked Voldamorts before it was censored.... it was hypnotic.......
  10. MineralgreyGT01

    I need help! ASAP! Cops welcome...

    Hey how about this? How to use the chart: 1. Determine the speed in mph after the vehicle has stopped sliding. This might be zero, but generally won't be zero. If the vehicle strikes something at the end of the skid, it is still moving and this residual velocity must be allowed for when...
  11. MineralgreyGT01

    X-pipe Nightmare

    Heres a post I put about in the summer when I changed out my studs. http://forums.stangnet.com/showthread.php?t=368370
  12. MineralgreyGT01

    problem removing stock shifter

    Ya mine sucked also, I used a small claw hammer and used the tranny casing for the rounded portain and put the claw part under the lip of the shifter base, applied a little leverage and it came right off, no marks to anything. Good luck. RTV sucks sometimes.
  13. MineralgreyGT01

    Anyone have the MRT H pipe?

    It is not one piece, it has a slip fit joint on the 'H' but it is very tight, no clamp needed. My pipe (O/R H ) was done very nicely and I had only a slight leak on the drivers side socket. The only thing I needed was some smaller SS bolts for the cat back. It comes with 3 inches and I needed...
  14. MineralgreyGT01

    Got my Cobra Today

    Holy Big Pictures Batman !!!! Looks nice :) To get it into reverse better, hold the shifter over for a few seconds before placing it into reverse.
  15. MineralgreyGT01

    The official wheel weight thread

    17 x 8 stock Bullitt style rims with stock Goodyears---> 44 lbs
View older results
Top Bottom
Back
Forums
Menu