Search results

  1. tims 86

    mod questions

    im sure this has been discussed a million times on here but i would like first hand experience on parts used. i have a stock bottom block that runs very well with a few bolt on mods, bbk cold air, shorty headers, h pipe, mass air conversion, 130 amp 3g set up and electric contour fan...
  2. tims 86

    5 lug stuff......

    will you sell just the calipers and mounting hardware?
  3. tims 86

    GT40P heads, oil pan, camshaft, injectors, fuel rail, pistons-rods

    any offers on the heads? cost to ship to 15001
  4. tims 86

    Gears & Upgrades

    i would do 3.73
  5. tims 86

    How do you fund your projects? especially if married?

    i pick up some side jobs from now and then,, they help alot!!!! all mine:D
  6. tims 86

    need some belt help

    i used the bottom left one with no problem,, just a really short belt and the underdrives make it shorter. 68.5
  7. tims 86

    Gutting Factory Cats/H-Pipe??

    i did that on my old f150 and it didnt change a thing. dont waste your time.
  8. tims 86

    need some belt help

    took me three trips to get the correct one.. tried the string method, didnt work for me. i think i ended up with a 68.5
  9. tims 86

    another voltage question

    it has the plug and also the 4 wire, and yes i just added the ground but no differance.
  10. tims 86

    FOXBODY GRILLE DELETE PICS

    nice car, clean. :nice:
  11. tims 86

    another voltage question

    i did the 130 amp pa performance alt and wire upgrade and also contour fan setup.. i have a up and down idle so i checked the voltage, with all things running at idle its 12.5-13.5.... at approx 1500rpm its steady 14.3 and the alt gets pretty hot.. is this normal? does this have anything...
  12. tims 86

    3g voltage help

    i have some kind of electrical problem i think. i just installed a pa performance 130amp alt and wire kit. also contour and setup.. i have a surging idle so i checked the voltage with all electrical things running.it is 12.5-13.5 at idle. and a steady 14.3 at 1500 rpm. also the alternator...
  13. tims 86

    voltage question?

    sounds good i will give it a try.
  14. tims 86

    voltage question?

    so do i need to add a 4 wire from batt to frame?
  15. tims 86

    voltage question?

    i have a question about my voltage, i just installed a pa performance 130 amp alternator and wire upgrade kit. also did the contour fan setup the same time. i have plenty of voltage when driving but at a idle it surges up and down. is this normal for this setup? also i have the flexalite...
  16. tims 86

    overflow tank mounting

    can i hook it to the valve end and leave it on? if so do i leave the vent open on top?
  17. tims 86

    fan confusion

    the fan is one speed, i just did mine last week. i used the flex a lite v.s controller and is working great. hook the wire to battery and make sure its going the correct way. alot of guys use one fan as the 1st stage and 2nd as the other speed. i would hook them together.
  18. tims 86

    overflow tank mounting

    i recently did the contour fan install and need to relocate the coolant tank, the stock one is too big so i got the smaller summit racing bottle, my question is, can i mount it lower than the rad? i found a good spot in the lower driver fender for it. thanks
  19. tims 86

    $120.00 aluminum driveshaft

    sounds to me like he is trying to sell you his brand:D i have never had anything but top quality stuff from ford racing.
  20. tims 86

    $120.00 aluminum driveshaft

    hard to say if there was a differace, i like to get a lot of parts and do everything at once. i would say that everything in the rotating mass area would help.
Top Bottom
Back
Forums
Menu