Search results

  1. Wknd_Warrior

    hanging idle when coasting....

    if you have the adjustable Idle plate behind the IAC, you don't even need the IAC plugged in. Then the RPMs will drop off without hanging... at any time.
  2. Wknd_Warrior

    Dart or R-Block?

    I am going to be ordering a new engine soon... just wondering if anyone has any comments one way or the other...Dart or R. I am looking for a 331 around 10.5 compression... forged components. Its a Street/Strip car. Probably make in the vicinity of 5-600 hp. Also, anyone have any...
  3. Wknd_Warrior

    Towing a T-5?

    It will ruin the transmission. I know first hand. ; ) Don't do it.
  4. Wknd_Warrior

    Cracked my block...

    :shrug:
  5. Wknd_Warrior

    Cracked my block...

    :notnice: I am debating going to a 351, or a stroked 351... but I don't know what parts will work with the conversion. I have the holley intake... no good with a 351? What if I wanted to keep it fuel injected... can that work on a 351? Any ideas where I can find a good R-block?
  6. Wknd_Warrior

    Mac Long Tube Headers/Problems???

    Agreed, I have them too... bad fit. Seem make good power though. :shrug:
  7. Wknd_Warrior

    just got my nitrous!

    Because I wanted a permanantly installed wet kit. You need a lot more fuel system to compensate through the injectors vs. adding fuel tthrough the nozzle.
  8. Wknd_Warrior

    just got my nitrous!

    I have that kit too... use it on my dad's caddy! His '02 Deville went 14.1 @ 102! It will hit harder with a full bottle and 950-1050 lbs pressure. I don't know if its safe or not, you need to get it on a dyno with a wideband O2 and see if its going lean.... The 100 shot is fine if the tune...
  9. Wknd_Warrior

    ok, here's one.. stock cam'd car w/ 1.72 rockers SLOWER than w/ stock rockers

    go re-read his directions again. Do it that way. Make sure you do one at a time and not your both are on the base method. You do one at a time when (When the exhaust valve begins to open, stop and adjust that cylinder's intake rocker arm... and when the intake valve is 2/3 of the way closed...
  10. Wknd_Warrior

    ok, here's one.. stock cam'd car w/ 1.72 rockers SLOWER than w/ stock rockers

    Did you do what 5spd GT told you to do with the install... those are very good directions on how to adjust your rockers. Also have someone turn the engine over when your outside watching the rockers... make sure everything is moving ok. Not to be a smart ass... but you know which rocker is...
  11. Wknd_Warrior

    T-5 Z Question

    I had a Z box in my car for years. It was a great piece, no doubt. It does make for a less aggressive launch though in comparison to the 3.35 firsts... Just some food for thought... have you looked into the G-Force trannies? I just rebuilt my ZT-5 with G-force parts, and it is by far the...
  12. Wknd_Warrior

    60 Footing Better...

    Here's the whole setup: Engine/Fuel/Cooling – D.S.S. Pro Bullet 306 with H-beam rods, Brodix Track 1 Heads CNCed by M2 Race Systems, Anderson Ford N-71 Camshaft, Jesel Sportsman Series Shaft Rocker System, Holley Systemax intake, Phenolic Spacer, ATI Balancer, Accufab 75mm Race Style TB and...
  13. Wknd_Warrior

    60 Footing Better...

    What should I do to 60' better. I just got new slicks today... I still have my front sway bar connected, do you guys think undoing that will help or hurt my car? It 60's mid 1.4s consistently. How do you think I should set my shocks and struts... I have the fronts all the way loose...
  14. Wknd_Warrior

    11.81 to 10.98 w/ NX 150 shot....

    so 9 mph gain over N/A seems about right for a 150 shot?
  15. Wknd_Warrior

    11.81 to 10.98 w/ NX 150 shot....

    11.81 Timeslip N/A 10.98 Timeslip 150 shot
  16. Wknd_Warrior

    11.81 to 10.98 w/ NX 150 shot....

    My best run N/A was 11.81 @ 114. I added the 150 shot and changed the gears from 4.30 to 4.10... best is 10.98 @ 123.5. Do you guys think there's more there? I have to get it back on the dyno for tuning, but I know last time I had it on there it only netted 110 or so more RWHP...
  17. Wknd_Warrior

    Pro-M Mass Air Broken...need contact info

    This group has their act together... I broke my meter Sunday, mailed it monday, and it has already come back to me repaired, and recalibrated. Its Wednesday. That's sickness. Some of the most polite and friendly people I've ever talked to at Professional Mass Air. Just wanted everyone...
  18. Wknd_Warrior

    Pro-M Mass Air Broken...need contact info

    Anyone know how to get a hold of Pro-M. Want to call them to see if they can repair my air meter. Thanks!
  19. Wknd_Warrior

    Nitrous Filling Stations

    I am looking into buying a nitrous filling station because the local shop around here just stopped selling nitrous. The next closest place sells it for $6/lb. :mad: I have no idea which stations are any good. Just wondering if anyone has info on what stations are any good. Looking at...
  20. Wknd_Warrior

    dyno tune

    I agree. :shrug:
Top Bottom
Back
Forums
Menu