Search results

  1. mattmcdan

    Cobra brake swap ???

    Mustang5L5 made a set for my car too! They worked perfectly on my 408w strip car.
  2. mattmcdan

    High RPM roller lifters

    quit pinching pennies you ol grouch! :)
  3. mattmcdan

    High RPM roller lifters

    Comp Cams link bar lifters... It wasn't just a suggestion. They ARE high RPM hydraulic roller lifters. you may have overlooked my original reply with the dip**** that went off topic.
  4. mattmcdan

    High RPM roller lifters

    I use a set of link bar Comp Cams in my 408. PN CCA-8931-16. My 351 is a non roller so you may need a different part number. But they are high rpm non pump up lifters.
  5. mattmcdan

    whats the best way to get the spindles off?!

    After you get them off and start assembly, you are going to want a set of Mustang5L5's balljoint spacers, they are very good quality. :)
  6. mattmcdan

    Who sells repo windshield and rear window trim?

    Anyone know of a company that sells repo windshield and rear window trim for 87-93 coupe? I would like to find the top and side pieces.
  7. mattmcdan

    McDan's Notch 408w build

    Nice bit of info. Thanks Rick!
  8. mattmcdan

    McDan's Notch 408w build

    Thanks! She's not a show car, and I don't have an endless supply of money to make it a show car, but things are coming together nicely now.
  9. mattmcdan

    McDan's Notch 408w build

    It's been a few years since i've really done anything to my car. I converted it from 4cyl to 5L about 2 or so years ago, drove it daily for about a year. I parked the car to do a manual to C4 swap and this is where it alll started. I ended up picking up a longblock roller 351w for $50 just to...
  10. mattmcdan

    94 95 mustang back brakes

    yes along with a 3-2 port conversion, 94/95 master cylinder, modified or deleted stock pv, adjustible pv, adapted rear brake lines, e-brake cables, wheels. etc. I just did a 5 lug swap, definitely was not a simple bolt on swap.
  11. mattmcdan

    Fox w/ Sn95 spindle

    I'm good for at least 1 pair.
  12. mattmcdan

    Pic Request *Capri RS*

    Just want a picture of the car I had when I was a teen. I'm going down memory lane. :)
  13. mattmcdan

    Fox w/ Sn95 spindle

    you can use a 94 or 95 lower control arm? I thought they were different?
  14. mattmcdan

    Pic Request *Capri RS*

    If it had the black stripe that would be it :) thanks for looking!
  15. mattmcdan

    Pic Request *Capri RS*

    Still can't find it. Found many cars that had black with silver bottom, seperated by orange stripe.
  16. mattmcdan

    Pic Request *Capri RS*

    Hey all! After hours of searching the interwebz, I cannot locate a picture of a certain color Capri RS. I used to have a Capri that was Silver on top, with a black stripe on the bottom, seperated with and orange pinstripe. If anyone has a picture on thier PC please post it up. Thanks!
  17. mattmcdan

    C4 Reccomendations? Can anybody help?!

    Jegs sells PA's stuff, get a PA C4 Super Comp rated to 1000hp and has lifetime warranty to boot. I have this trans behind my 408w. :)
  18. mattmcdan

    Need suggestions

    $800-$1000 I can buy projects similar to that one all day long for that price.
  19. mattmcdan

    Fox w/ Sn95 spindle

    I'd rather do the sn95 ball joints for peace of mind. I just built a nasty 408, and the car is strip only. Just eases the mind a bit.
  20. mattmcdan

    Fox w/ Sn95 spindle

    What is your recomended method for doing this? Is it easier to remove the lower control arm? Leave it on the car?
Top Bottom
Back
Forums
Menu