Search results

  1. Hickfied

    rebuild 302

    400 at the wheels is gonna cost alota money..... Isn't easy either. On a 306ci engine I would go with a AFR 205 head, and a vic jr intake, and a big ass custom solid roller, but that is just the way I like to make HP :D but then again, I have been wanting to make a h rev 302 for autocross...
  2. Hickfied

    5-lug conversion

    I have 4cyl brakes, so I used Ranger rotors for my conversion. About $24 a piece, and $23 for the "good" cheapo brake pads from AutoZone. I also needed new dust caps for the rotors as the Rangers are a little bit larger, they are about $5. For the rears I used Ranger axles from the JY...
  3. Hickfied

    k member help!!!!!!!

    Do you have a picture of how the block looks in the K member? The 4.6 is much wider, I would assume the motor mounts on them would be much much wider also.
  4. Hickfied

    need advice where to store motor for upcoming project

    Shortblocks aren't heavy, I actually used a spare bedroom to build a engine for a friend. Just carry the shortblock in already attached to one part of the engine stand, and have a friend bring the rest of the stand in behind ya. Once it was build, we rolled it to the porch and used a cherry...
  5. Hickfied

    CC plates interchange?

    I have some Steeda CC plates that I ordered for my 89 car... I see that some places split the years up around 90 or 91, does anyone know if it is ok to use them on my 93 car?
  6. Hickfied

    please help :\

    So the engine breaks up? Does the tach jump around, acts funny? There is an ignition module bolted to the front of the intake; When looking at the engine from the front, it will be on the right, and if original it will be labled "DIS". It will have a harness connecting to it at the top and...
  7. Hickfied

    295/50`s on 8 inch wheel

    if your not lowered, go with a 275/60 instead of a 275/50. My notch isn't lowered and there is 3" between the tire and the fenderwell with the 275/50's.
  8. Hickfied

    UPR Hime joint control arms...

    get new heim joints! The stock ones from UPR are CRAP! I have seen several cases of the stock hardware from UPR failing!
  9. Hickfied

    steering shaft & headers??????

    hissing, do you know where to get the u joints to make your own, possible for a manual rack also?
  10. Hickfied

    converting my '75 351W to a roller...?

    If I where to use a FT cam in my HR engine, I would have to swap out cam bearings. The FT cam is smaller than the HR. Would this not constitute changing the bearings out for the HR in a FT engine?
  11. Hickfied

    86 interior swap to 93 - ebrake question

    They mount on the opposite side from each other. When I put a 4 eye e brake handle in my car (it weighs A LOT LESS) I had to re-drill the holes. Other than that, it's just a bolt in thing.
  12. Hickfied

    Burnout again...(aftermath)

    Just don't piss the neighbors off, and get the police called on you. That would be a bitch, wreckless driving and driving without a license. Great burnout though :D
  13. Hickfied

    351 LT Hdrs on 302?

    I am going to try to run my 351 BBK swap headers on my 302. If they don't hang ultra low, I am going to weld up my own X pipe.
  14. Hickfied

    Stangnet Picture Uploader

    www.sickstangs.com is my site. I am using it for personal pic hosting, but anyone here can use it if they want too, as long as my bandwidth usage doesn't go sky high. EDIT: If anyone hacks it as it is a celeron uploader, everything you upload will be lost if they want to delete everything.
  15. Hickfied

    2.02 or 2.05 valves?

    New bearings will be in order if you want to convert to hydro. Unless you get a reduced base circle cam.
  16. Hickfied

    Door, doors I hate doors

    the door will bolt in, but one set of glass is longer than the other.
  17. Hickfied

    web hosting?

    Seeing dreamhost just made me decide to switch from surpasshosting.com who i have been using for 4 years now. Wow, I have NEVER seen a package like that! I ususally only see less than 100GB BW a month for less than $10!!!
  18. Hickfied

    must i modify explorer 65mm t-body?

    grab the studs with a nice set of pliers and twist them out, PB Blaster can help losen them up. Then get new bolts from the hardware store (stainless steel allen heads FTW)
  19. Hickfied

    Bellhousing for 5.0 Swap?

    Will a 300 I6 bellhousing from a F150 work? I have heard that they have the same bolt pattern and will bolt up. Will the clutch fork work also?
  20. Hickfied

    HO vs Non HO?

    I just pulled a 5.0 out of an 88 Thunderbird. I got to tearing it down, and it has a roller cam, but it does not have the valve reliefs shaped as eyebrows of an HO. It does have a "dish" in the center of the piston, that dips down about a 1/16th of an inch. I forgot to look @ the heads to get...
Top Bottom
Back
Forums
Menu