Search results

  1. jnobles06

    Timing a 393 stroker?

    im installing a 393 stroker kit in my 351 and was wondering what i need to do about the timing?
  2. jnobles06

    5.0 heads on a 351w?

    will 302 heads fit a 351w? im under the impression they will.
  3. jnobles06

    76' v6 to 302 swap help

    does anyone know what all parts are needed to swap a 302 in to the v6/4-speed stick mustangs. im thinking a 302 (of course), t-5, and an 8.8 rearend. im not sure about the little things though like the motor mounts and how the tranny and rearend is going to fit. any help is greatly appreciated.
  4. jnobles06

    302 to a 351W, advice and suggestions please

    is it cleveland? i wasnt sure b/c im not that familiar with 351's. mine is already in the car running but i was told it was a 351w w/ a 9.2 deck. maybe he was wrong. ill have to check it out. i know my friends is efi and he had to buy a different lower intake but is using the same upper off of...
  5. jnobles06

    302 to a 351W, advice and suggestions please

    if the engine came out of an econoline van its the 351 w/ a 9.2 deck not the 9.5. i have that same engine in my 95' and its in my friends 94'. just thought you might be able to use that when ordering parts. he went efi and i am carbed. my engine is in my car his still isnt. hes been working on...
  6. jnobles06

    351W ?

    i just bought a 95' with a 83 351W and C-4 Transmission. I didnt know which forum to ask this in but i figured this would be the best one. Does anyone know how much power this engine makes or how fast the car is? Will it beat a newer gt? The engine is stock. Im going to put a different intake...
  7. jnobles06

    85' 5.0 C.F.I. ???

    i was wondering what cfi ment? im buying a long block 85' cfi. i think it means carb fuel injection. if this is true to i have to keep it like that or can i just sraight up carb it? if i do just put a normal carb on there w/o the fuel injection do i still need to buy the cfi engine specific...
  8. jnobles06

    V-6 4spd. to 302 4spd?

    so the 4-speed stick will not match up to the 302?
  9. jnobles06

    76' cobra II

    think ill stick w/ the 5.0
  10. jnobles06

    76' cobra II

    im pulling the old motor out and putting a newer 302 in it but to you recomend keeping it carb or efi? its a long block that still needs alot of stuff.i dont really know much about engine swaps so i dont want to be doing anything to difficult and from what i have heard yall say the 351 will be...
  11. jnobles06

    76' cobra II

    im thinking about buying a 1976 mustang cobra 2. i think it came with a 302. i dont know much about classic cars so i was just wondering. i was also wondering how hard it would be to drop a 351w in it. any comments are greatly appreciated.
  12. jnobles06

    1976 mustang cobra 2?

    im thinking about buying a 1976 mustang cobra 2. i think it came with a 302. i wanted to know if it was a roller motor or not. i dont know much about classic cars so i was just wondering. i was also wondering how hard it would be to drop a 351w in it. any comments are greatly appreciated.
  13. jnobles06

    msd dis-4 or stacker 8?

    i know, but im about to do forged pistons and rods to run more nitrous and i know im goning to need a better ignition system.
  14. jnobles06

    PI Intake Swap & MIL

    i know im comming in kinda late, but the PI intake bolds directly on? i thought the PI intake had to be port matched to the NPI heads. where can u buy these kits with the adapter plates and what not to do the complete intake swap? and how much does it run in $$$.
  15. jnobles06

    msd dis-4 or stacker 8?

    i have been reading up in these two ignition systems. i just cant decide which one is better any comments would help.....thanks.
  16. jnobles06

    nitrous bottle help

    other side? if your talking about the other side of the trunk u gotta drop the gas tank. but the way that article shows u how u mount it to the spare tire cover and u secure that down by that big piece of all thread that your spare goes on to. and as for the blow down tube i would run it by...
  17. jnobles06

    nitrous bottle help

    check this out it migh help http://www.mustang-x.com/info/how_to/NX-Install/NX-Install01.html
  18. jnobles06

    1/4 Improvement w/ 4.10's?

    I have a 98' automatic gt. im about to put 4.10's in and just wondering how much it would improve my 1/4 time.
  19. jnobles06

    1/4 Improvement w/ 4.10's?

    I have a 98' automatic gt. im about to put 4.10's in and just wondering hom much it would improve my 1/4 time.
  20. jnobles06

    98' 2v to a 03' 4v

    will the engine and tranny fit right in?
Top Bottom
Back
Forums
Menu