Search results

  1. Lifted94XLT

    Magical Disappearing Brakes - 92 Mustang

    Ok, saw some progress this weekend, but still not quite there. Friday, I swapped in yet another MC for a New unit. This time, I didn't bench bleed it at all, I just put it on the car, then immediately pressure bled the system. My thinking for replacing the MC yet again was I had a feeling that...
  2. Lifted94XLT

    Magical Disappearing Brakes - 92 Mustang

    will do....
  3. Lifted94XLT

    Magical Disappearing Brakes - 92 Mustang

    On the prop valve, the Front line (closest to the radiator) coming out of the bottom goes to the Front Right line, and the Rear line (closest to the firewall) coming out of the bottom goes to the Rear Line.... Matching this diagram.... Obviously #3 isn't used in Fox prop valves... so just...
  4. Lifted94XLT

    Magical Disappearing Brakes - 92 Mustang

    yes, its possible, but mine are mounted correctly.
  5. Lifted94XLT

    Magical Disappearing Brakes - 92 Mustang

    I did.... I changed over the V8 Spindles, rotors and calipers to the 4cyl car.
  6. Lifted94XLT

    Magical Disappearing Brakes - 92 Mustang

    I'm still 4 lug.
  7. Lifted94XLT

    Magical Disappearing Brakes - 92 Mustang

    Good thinking, but no.... I owned the donor car that all the V8 parts (rear end and calipers) came off of and I drove that car before it became the donor and the brakes and everything worked great on it.... wierd huh? :shrug: --Ryan
  8. Lifted94XLT

    Magical Disappearing Brakes - 92 Mustang

    I bench bled the MC by:: -Lightly clamping into a bench vise. -Install MC Bench bleed kit. (three plugs that go into each port that have nipples on them to attach rubber lines to which go back into the top of the MC reservoir) -Fill reservoir with brake fluid and make sure all three of the...
  9. Lifted94XLT

    Magical Disappearing Brakes - 92 Mustang

    ok, here's what I did today/tonight:: -Started off my changin out the Combo valve with a different, cleaned valve....Bled system.... No Change -Then compared the length of a Booster Push Rod to mine (6 3/8" long), then for fun, extended it out to see if I could tell a difference....Bled...
  10. Lifted94XLT

    Magical Disappearing Brakes - 92 Mustang

    No sir. When the car is off, the pedal has good feel.
  11. Lifted94XLT

    Magical Disappearing Brakes - 92 Mustang

    I'll take a look and check back tomorrow.
  12. Lifted94XLT

    Magical Disappearing Brakes - 92 Mustang

    Can you explain that? I'm kind of a slow kid. Haha
  13. Lifted94XLT

    Magical Disappearing Brakes - 92 Mustang

    When the Brakes are applied, it stops the wheels, which in turn stops the rotation of the drivetrain which will stall the engine (t5 trans)..... The Brakes work..... you just have to put the pedal to the floor and then there's brakes... if that makes sense. I have been through 5 Master...
  14. Lifted94XLT

    Magical Disappearing Brakes - 92 Mustang

    As stated in my original post, yes. :D
  15. Lifted94XLT

    Magical Disappearing Brakes - 92 Mustang

    I think I do... in my opinion at least. haha. I wanna put a pressure gauge on it though and make sure everything is up to spec..... does anybody know what the "Factory Spec" for the brake pressure is?? --Ryan
  16. Lifted94XLT

    Magical Disappearing Brakes - 92 Mustang

    Well, I have been suggested about booster issues also, but to my understanding, a bad booster would cause HARD pedal, not very soft pedal. The booster is a brand new unit from NAPA (and I know, haha, even though its new does not mean its good). Yes sir, I bled from the right rear, to the...
  17. Lifted94XLT

    Magical Disappearing Brakes - 92 Mustang

    Updated:: Magical Disappearing Brakes - 92 Mustang -- FIXED!!! OK, For all of you that are new to this thread, I am updating this post with a list of everything that has been tried, tested, and done to this vehicle to help fix my problem, and to help catch you up to speed since this post is so...
  18. Lifted94XLT

    AOD to 5sp swap in a 92 5.0 notch????

    You can just pull that cable off the column.... I did that on my car with no problems.
  19. Lifted94XLT

    Quick Turbo Intercooler ?

    Thanks for the info!! I greatly appreciate it and will keep it in mine while I search for a cooler. Thanks again! --Ryan
  20. Lifted94XLT

    Quick Turbo Intercooler ?

    I'm piecing together a DIY turbo kit, and I've come across a guy selling a brand new XS-Power (ebay brand) for $50.... its 160 x 460 x 90 (6.3"x18.11"x3.5") with 2.5" inlet/outlet size.... he's checkin for me if that overall deminsions or just the core size. Anyway, my questions is, will this be...
Top Bottom
Back
Forums
Menu