Search results

  1. jerry S

    Header clearence issue, adjustable mounts

    I have the TCP not hard to install. these allow for adjustment front to rear. The Ron Morris mounts allow for adjustment left and right as well as front to rear. Something to consider.
  2. jerry S

    How much rwhp.. ?

    I am going to guess that you might see a peak of 290-300 rwhp.
  3. jerry S

    How much rwhp.. ?

    a question what transmission are you running?
  4. jerry S

    Scott Drake "quality"

    30 days is indeed weak. It tells me, a corporate lawyer, the following 1. There is no other mfg out there offering a rival product of the same or superior quality 2. the quality of the product is poor. 1 and 2 must be true or the warranty would be longer than 30 days. I used to write...
  5. jerry S

    Scott Drake "quality"

    Say what Willis? not what the visa in my passport says. It says ROC, not PRC.
  6. jerry S

    Complete floor assembly (full floor pan all the way to the trunk)

    I did not need a wrecking ball. This 3 lb beatin' iron was able to "persuade" my one piece floor pan to fall in line. floor has been cut out one piece waiting to go in finished product
  7. jerry S

    Finding 3.91 gears???

    does the car have to be concourse correct? If not, there would no discernible difference between 3.91 and 3.89. RPMs at 60 mph would differ thusly: 3.91 pinion gear, 27 inch tire at 60 mph = 2998 rpm with three speed auto 3.89 pinion gear, 27 inch tire at 60 mph = 2982 rpm with three speed...
  8. jerry S

    351W block, Roller cam

    You have two options. you can use a small base circle roller cam. This entails installing a spider in your block with drilling and bolting. This is the cheapest way to go. I think all you need is the spider and the cam. the other way to go, which is what I did, gives you more options...
  9. jerry S

    finally finished with paint

    very nice. Congrats on finishing.
  10. jerry S

    full floorpan - poor fitup

    I had a full length floor installed in my mustang. Gaps that were encountered were fixed with the appropriate sized beatin' iron and a spot welder Here is a pic with the floor out the floor pan that had to go in and the finished product
  11. jerry S

    Electric Water Pump setup

    you can drill at tap lines from the 35 gpm to the heater core. If you send your pump back, Meiziere will do it for you for $30 or so. Or, they will send you a fax with instructions. If you pm me with your email address, I will send you the instructions they faxed me.
  12. jerry S

    what is the better tilt column between FR and Ididit?

    I may go with the TCP tilt column after all. It is the previous model Ididit column and is 5 positions as opposed to the new 8 position but costs only $445 from TCP compared to $529 for the Ididit from Summit.
  13. jerry S

    what is the better tilt column between FR and Ididit?

    I will, just as soon as I get mine on my car.
  14. jerry S

    what is the better tilt column between FR and Ididit?

    yes. ididit inc - 1965-66 Mustang Steering Column Made to Fit
  15. jerry S

    what is the better tilt column between FR and Ididit?

    It actually does. From the Ididit website: 1968-69 Mustang column Standard Features : Self-Canceling Turn Signals 8-Position Tilt 4-Way Flashers Knobs and Handles Ford Turn Signal Switch Ford Top Shaft Floor Mount included 3/4" 36 Lower Shaft Collapsible
  16. jerry S

    what is the better tilt column between FR and Ididit?

    It is done I went with the Ididit. It had several factors in its favor it is actually cheaper than the FR. $529 for the Ididit from Summit compared to $575 for the FR column and installation kit (OEM wheel). By the way, MDepot sells the FR cheaper than anybody else if you are fixed on the...
  17. jerry S

    widebands: decisons, decisions

    The innovate LM-2 comes the most recommended but it has a lot of extra features that fulfill no function on my 1969 mustang (OBD connection, by way of example) and which add cost. All I want is a dual sensor wideband so I can tune my car perfectly and keep it that way. FAST makes a dual...
  18. jerry S

    what is the better tilt column between FR and Ididit?

    I want to upgrade and am looking for recommendations. On edit: I realize I will prolly need to go with a TCP because I have a TCP rack and pinion.
  19. jerry S

    Grant Signature Series wheels?

    Grant might not make a polished horn button that says "Mustang" but if you can settle for "Ford" then you are in luck. I had the polished horn button on my Collector's Edition wheel. The horn always worked and the horn button looked good. I took the wheel off and replaced it with a "new" rim...
  20. jerry S

    Break In Procedure/Oil For Crate Engine?

    I am getting my car back soon and it has a new roller cam and new engine bearings. My mechanic says the cam does not need any break in but the engine bearings do. He is putting an RPM limiter (2000 rpm) in for the first 1000 miles
Top Bottom
Back
Forums
Menu