Search results

  1. Big Show 96

    Livernois PI intake

    I installed mine with the old faithful RED RTV, but only around the coolant ports. No leaks!! Also don't forget to change your water pump nipple & water pump to heater core hoses with one from a 99-04 model. Does the livernois intake have the boss drilled & tapped for the temp sensor in the...
  2. Big Show 96

    Car wont shift outta 1st and idle is high.

    The speedo plug is located on the drivers side of the trans near the tail shaft around the cross member area. The TPS should be located on the side of the throttle body directly across from the throttle cable. It should be mounted with two small screws or trqs head bolts with one plug connected...
  3. Big Show 96

    Car wont shift outta 1st and idle is high.

    Possible TPS problem. Also make sure the wires on the trans for the speedo are tight & dry. The TPS, speedo, & trans work together.
  4. Big Show 96

    Severely annoying starting problem..need opinions

    You might also want to check your injector o-rings. I had 2 leaking causing the same problem.
  5. Big Show 96

    WTF!!!!!! Is my motor gone????

    There are 2 rubber o-ring style gaskets under the cross over that can slightly leak because of the torque from the alternator bracket that responsible for the intake cracks. You might want to look under the intake for traces of coolant.
  6. Big Show 96

    ? on pi intake

    I don't know much about the cam install besides that the cam girdles break easily. Make sure you unbolt them evenly. I installed the PI intake on my 96 GT with little mods. I swapped the front cross over tube so that I would not need to drill & tap for the temp sensor. I also used the PI gaskets...
View older results
Top Bottom
Back
Forums
Menu