Search results

  1. C

    Gears Install in Mass.????

    Well Im going to MikeDezRacing for my 99 cobra next week. They seem really good.
  2. C

    Gear swap in a 99 Cobra

    why dont you like the way it feels. Its ok to be at or above 3k you know. That is what they are meant to do
  3. C

    Gear swap in a 99 Cobra

    dman, 410s from what I hear are not at all extreme in a high winding cobra. I never race my car and I am putting them in. I do not drive on the highway much but if I have to, the cobra's prefer to cruise close to 3k, and also it is actually better for both your motor and your transmission to be...
  4. C

    New Cobra gets smoked...

    Wow, I think many people in here need to switch to an import forum or something. I just drove in a 2003 cobra yesterday with a ported blower, and smaller pulley, chip, exhaust, intake, gears...you get the picture, 580 at the wheels, lets just say, you were not going to pass it, not from a roll...
  5. C

    Gear swap in a 99 Cobra

    I do not have the 410 gears yet installed to report on, but currently with the stock 327's, I do not have too too bad of wheel hop, I believe all I have to counter that is hypercoil lowering springs, subframe connectors, and some good old bfg tires :D Seems like if you spin the tires alot...
  6. C

    Gear swap in a 99 Cobra

    Do you guys think you will have any problems with the rear end on a 99 with 410 or higher?
  7. C

    Adjustable Clutch Quadrants???

    Do you know what the input shaft does? What is it responsible for? My tob has been gone bad since this past summer, do you think if I replace the clutch and tob this summer, a year from then, would I be ok? I just couldnt afford it now and I think one would mine as well replace the clutch while...
  8. C

    Underhood insulator keeps falling :(

    The liner was fine , but the it could be shiped more protected, but mainly 2 of my pins will not stay on so my liner droops on the top right :mad:
  9. C

    Underhood insulator keeps falling :(

    hmmm, any ideas on how to keep the pins from falling out?
  10. C

    Underhood insulator keeps falling :(

    I will have to see if I have any of those still around, most of mine have fallen off. I like 50 alot but I was disappointed with the insulator and the pin order. I had to send the first one back because it had a dam hole in it! 50's pins actually looked longer and better than the stock ones, but...
  11. C

    Underhood insulator keeps falling :(

    Hmm, ya I know it is on there for asthetic reasons as well as to protect the paint, but I have seen many without them with no problems. I had bought mine for looks only. So I wanted to know if there was any type of tape or glue that would help hold it up. I spent like $100 for the hold liner...
  12. C

    1st-2nd shifting problem

    well it may help, but dont let him try and cover it up by puttin synthetic in there. I only think urs is busted too because same thing happened to mine at like 4k plus, but if you only fix 2nd gear, then it would be like 800 bucks probably. But sorry man, I d keep looking, I spent like 3 grand...
  13. C

    Adjustable Clutch Quadrants???

    Oh boy, ok well heres the thing for the past 2 months, my tob is messed up because it chirps and makes noises while the pedal is not pushed down. You see apparently I had the calbe too tight I think, and maybe that caused it. My clutch still works fine now, but I am constantly turning it...
  14. C

    2001 Cobra Oil Recommendation

    thanks :D
  15. C

    Underhood insulator keeps falling :(

    Does anyone know if there is any kind of glue or double sided tape that will keep my push pins from falling out under the extreme tempertures under there? I recently replaced the insulator with a new one and now I cant get the pins to stay firmly in place, and the dam thing will fall down, not...
  16. C

    Adjustable Clutch Quadrants???

    I have had a firewall adjuster for about a year and I still do not know how or what it does really. I want it so the clutch engages right off the floor, and it seems that turning it clockwise does that for me. Apparently it was too tight at first, a shop told me that, and that is when I started...
  17. C

    1st-2nd shifting problem

    OUCH, same thing happened to me with my 99 with a pro50 shifter. First thing to do is check to make sure that your stop rings are set far enough back that your shifter can fully engage 2nd gear. Next check your clutch. But I hate to tell you mean, but you are gona have to tear open your tranny...
  18. C

    1st-2nd shifting problem

    OUCH, same thing happened to me with my 99 with a pro50 shifter. First thing to do is check to make sure that your stop rings are set far enough back that your shifter can fully engage 2nd gear. Next check your clutch. But I hate to tell you mean, but you are gona have to tear open your tranny...
  19. C

    KB Aluminum differential bushings

    Do these bushings just suck or is it just no one knows or what!!! ahah Come on guys, i wana know what you all think of KB's anti wheel hop stuff. :shrug:
  20. C

    brand of sparkplugs?

    I believe I have Bosch platinums, no problems yet. Seems same as stock.
Top Bottom
Back
Forums
Menu