Search results

  1. OonDeanisS

    Fuel pump eccentric?

    thanks guys, looks like im the noob!
  2. OonDeanisS

    Fuel pump eccentric?

    I bought a new timing chain from FRPP and I'm wondering if I need to replace my fuel pump eccentric? I have never heard of this part before, and I have searched but all I find is efii to carb swaps. My car is efi, and runs poorly at the moment. It seems like the car is cutting out on fuel. Can...
  3. OonDeanisS

    can I reliably turbo my car for around 3k?

    Wow thanks for the advice, looks like it can be done... I was also considering the hellion single turbo kit but it's 4k
  4. OonDeanisS

    can I reliably turbo my car for around 3k?

    i dont mind if i have to piece it together or buy a whole kit, but im wondering if i can get a good setup together for around 3k... any suggestions? also, does anyone know where i can find a list of all parts/hardware needed for the entire kit? i have 330 to the wheels now, looking for 8-12...
  5. OonDeanisS

    Finally got my deep dish 10th anniversary Cobra wheels!!!

    Do you know which company is selling them? i was about to buy the ones on 50resto right now and then i just read this so good thing i didnt i guess. thanks
  6. OonDeanisS

    HEGO sensor & ground?

    oh no kidding, alright, well i read that someone had extended their HEGO ground wire to the engine block and it cleared up a hesitation issue at part throttle that i also have, so i wanted to give it a try. can anyone clarify this any more?
  7. OonDeanisS

    i need tdc/distributor/firing order help

    So i found this old paper that i wrote on saying that my 1974 351w is non H.O. and the firing order is 15426378, is this possible?
  8. OonDeanisS

    HEGO sensor & ground?

    can anyone post a pic of these for me please? for use on a 90 5.0
  9. OonDeanisS

    Repro Headliners??

    just wanted to say i used black spray dye on my blue headliner and it looks brand new, came out amazing.
  10. OonDeanisS

    There's gotta be a better way!

    well this is the second mustang ive had with no heat in the winter here in new england, and i pulled the dash on my 86 and replaced the heater core, but now my 90 needs one too, and i just dont want to go through it again, my car was a mess for a month because i screwed up the headlight switch...
  11. OonDeanisS

    Help, my engine still wont start

    i have the exact same problem in my 351w. When i checked for TDC, the spark plug hole was bigger than my finger, so i couldnt plug it firmly, so when i felt air coming out past my finger i stuck a screwdriver in and got it to the top, then put the dizzy in with the rotor facing the #1 on my...
  12. OonDeanisS

    motor mount bolt size?

    ok well i got them done, the big bolts are 13/16, and the small ones to the block are 7/16.
  13. OonDeanisS

    motor mount bolt size?

    anyone know what size bolts the motor mounts and tranny mounts use?
  14. OonDeanisS

    i need tdc/distributor/firing order help

    great, thanks guys!!
  15. OonDeanisS

    i need tdc/distributor/firing order help

    also, does anyone know what size the crank bolt is?
  16. OonDeanisS

    i need tdc/distributor/firing order help

    thanks. Now when i get to TDC, am i correct that this is when the rotor should be pointing at the #1 plug wire?
  17. OonDeanisS

    Fuel pump wont shut off??

    i have an 86 with a 351w in it, and my fuel pump wont turn on. it has a MSD box and coil, but im not sure where the power should come from. THe coil?
  18. OonDeanisS

    i need tdc/distributor/firing order help

    I have a 351w that i recently took apart and now that its going back together, i need some help. Problem is, i didnt mark which plug the rotor was facing. You know how the cap has the #1 on it? well, if i start there and wire them 13726548 (do i go clockwise or ccw?). THen i need to...
  19. OonDeanisS

    '90 lx with 5.0?

    doesnt sound like a bad deal. Hopefully the blue smoke (burning oil) is just a head gasket rather than worn piston rings. Unless you are going to rebuild the block, i wouldnt put any nitrous on it. If you want to know what gears it has, put the rear end on jack stands, mark the driveshaft...
  20. OonDeanisS

    What is the lightest car I can fit a 351w into?

    hands down, a kit shelby cobra.
Top Bottom
Back
Forums
Menu