Search results

  1. mhanna77

    Still thinking about Buying Steeda Triax?

    Mine is noisey even with the rubber boot in place.
  2. mhanna77

    Permanent EGR removal

    Has anyone had good or bad experiences with the removal of the EGR valve? I know some drag racers do it, I wanted to know if anyone has found any advantage doing it on a daily driver, or does the computer just get confused?
  3. mhanna77

    Custom CAI

    I'm suprised the chrome inlet tube stays cool.
  4. mhanna77

    Finally got around to that pesky idle........

    Someone posted a link to another similar post that shows a picture of the idle air kit. I also have the kit. Look at the picture, the part is designed to let air enter one chamber and then be regulated through an orifice (by an adjuster screw) into the second chamber. This was to allow the...
  5. mhanna77

    Finally got around to that pesky idle........

    The part is made for the 5.0 and happens to fit the 4.6 but doesn't work, I have the part and by design cannot work on our 4.6 cars.
  6. mhanna77

    Finally got around to that pesky idle........

    Some aftermarket TB's have a idle adj. screw. If so just unplug the stupid IAC, set your idle with the screw on the aftertmarket TB and enjoy snappy throttle response.
  7. mhanna77

    Will road salt ruin my rims?

    Those are machine finished wheels and the salt WILL eat them up. If they were painted wheels, the salt wouldn't hurt them. -Marcus -Affordable Aluminum Wheel Repair, LLC.
  8. mhanna77

    how much for paint?

    $400-600
  9. mhanna77

    Quiet down that Triax...look here!

    My Steeda makes alot of noise IMO. :shrug:
  10. mhanna77

    Steam From One Tailpipe

    You have moisture build up (while the car is off) in the exhaust system, and when you start your car it burns that water off creating steam. Some cars seem to do it more than others. Remember H2O is a by-product of combustion. You might even notice water dripping from your tail pipe...
  11. mhanna77

    Comp Cams

    Did you replace the valve springs?
  12. mhanna77

    show me your polished wheels

    Polished wheels are much lighter than chrome because they are aluminum alloy. All OEM and some aftermarket (polished) wheels are clear coated. The Pros of the polished, clear coated wheels are: Protection of the polished surface, low maintenance, you treat them the same as your car paint...
  13. mhanna77

    High pitched squeel coming from wheel well followed by burning smell, PLEASE HELP

    Trade it in for another Maxima.
  14. mhanna77

    Pics of Trick Flow Plenum

    It was $139 from Summit. It has a 75mm opening, and came with instructions (as if you needed any), extra fittings, and a throttle body gasket. Dyno......maybe
  15. mhanna77

    To All Of You Who Dont Like Flows And Bbk O/r X...

    Technically they don't "suck", they Blow :rlaugh:
  16. mhanna77

    Pics of Trick Flow Plenum

    Here are some pictures of the TF plenum I just recieved....
  17. mhanna77

    Thinking of welding straight pipes, instead of mufflers

    With the factory cats still in place they will muffle the exhaust to a point, I have heard a 5.0 with cats and no mufflers (still full exhaust) and it sounded ok, but it was LOUD.
  18. mhanna77

    HELP!!!!! Before I hurt my tranny...

    If you want to keep the locks make sure to adjust them by the instructions and use loc-tite to secure them. I don't think a syncro would be bad on your car because you say 2nd and 4th are out. The syncros are 1/2, or 3/4.
  19. mhanna77

    HELP!!!!! Before I hurt my tranny...

    I read a tech article about the 5 speeds having internal shift stops and that you should not install the stops that come with aftermarket shifters. The reason given: "The transmission could POP out of gear and damage the shift rail" I never instaled the stops with my Tri-ax.
  20. mhanna77

    Anyone have this problem???

    I have the same stupid problem, it started a week ago!! -Turn off your Norton privacy control, that fixed my problem.
Top Bottom
Back
Forums
Menu