Search results

  1. M

    Need help installing viper alarm

    Got a viper 300esp from a wrecked car, got all the wires and horn etc, but of course I dont have the instructions, now on the back of the alarm brain, it has the wire codes, but I dont have them for my car, is there anyone on here that installed there own alarm? could use some help on wiring...
  2. M

    Tackling A Swap

    If he goes carbed, his stock hood will work, he'll just have to get a torker II intake for a 351w, motor mounts will work also, not very sure but I thought the K member was different also, because with a 4.6 the motor sits differently than the 5.0. I should be doing another 351w swap on my 97...
  3. M

    Engine stalls and shuts down warm

    anybody, or just tell me if the CEL has to come on to receive error codes?
  4. M

    Engine stalls and shuts down warm

    my check engine doesnt come on, thought that it has to come on to pull up a code.
  5. M

    Engine stalls and shuts down warm

    If I drive my car home from work, about a 45min trip, if I run in a store, start her back up, she stalls, then dies, I have to give it gas to get it going, noticed this happening a few weeks ago, so changed plugs and air cleaner, same problem, its getting cold here, so dont want a minor problem...
  6. M

    Anyone used Lucas products?

    I love Lucas products, in every oil change, tranny fluid, rear end, or fuel injector cleaning, lucas goes in, every since the guys at the engine shop told me how good it was, been using it everytime, also, on my old 3.8 tbird, used to hear a little ticking sound, add lucas, tick went away, and...
  7. M

    351 swap in my 95

    you can also use the hooker 351w swap headers also, other than intake, everything else should swap just like a 302.
  8. M

    Dexron III in my Manual transmission?

    thats exactly how I fill mines.
  9. M

    Dexron III in my Manual transmission?

    yes you do use the dexron III automatic tranny fluid, dont know the difference in the two thou.
  10. M

    (clutch?) chattering, very very light grinding gears sound maybe

    when it finally clunked out, just pulled over to the side, called a tow truck back to the stable it went. But before it went out I felt the tranny slipping, it just kept getting worse and worse.
  11. M

    which o/r h-pipe should i get??

    I have the bbk o/r h-pipe, no fitment problems with the install.
  12. M

    (clutch?) chattering, very very light grinding gears sound maybe

    I heard my whine in 1st, 2nd, 3rd, and 5th, it wasnt that bad at first but the whine just kept getting louder and louder till finally, clunk. Did you check your fluid? could be the T.O. also, just throwing an idea at you.
  13. M

    (clutch?) chattering, very very light grinding gears sound maybe

    Input shaft, mines did the same thing before it went out, while driving, do you a whine?
  14. M

    Who's got a C4???

    thanx
  15. M

    Who's got a C4???

    trying to find some driveshft spacers, no luck, where did you find yours, or did you fad em up?
  16. M

    Who's got a C4???

    I do, I have a c4 also waiting to get installed, what was all involved, did your stock cross member work, what did you do about your ds, and what kinda shifter did you use? and are you able to drive on the express way?
  17. M

    Anyone have a break pad explode while driving?

    I was never able to use that cube thing, autozone rents a rear disc caliber removal tool thats way easier that the cube.
  18. M

    Help with removing spark plugs

    Am I the only one having problems with removing the drivers side spark plugs, whats the best way to remove the last two by the firewall, it is a very tight fit and I could barely remove the spark plug wire on the first one, am I going to have to lift to motor or is there another way? Thx in...
  19. M

    wtf was that?? (help!!!)

    that happened to me once on my old tbird, it was the air thottle bypass valve or something like that.
  20. M

    Hardblocking

    Any of you guys know anything about hardblocking, was talking to my engine shop the other day and we were talking about getting me more power with a stock block, dont really want to spend 2-3k on a aftermarket block, but we we talking about making an all out dragster, and they bought up full...
Top Bottom
Back
Forums
Menu