Search results

  1. str8stang036

    Oil behind intake

    Oh, forgot to talk about the PCV. It is completely covered. I have the Edelbrock Super Victor EFI intake, no port for the PCV. I have one breather on each cover. Its enough oil to cook a small steak. LOL
  2. str8stang036

    Oil behind intake

    I have been having a throttle blip/buck from idle and stopped position. I haven't been able to tune it out yet, but today I discovered oil puddles on the block behind the intake. I assume this is a vacuum leak, am I correct? Jose
  3. str8stang036

    Some trouble with idle and tip-in

    358w Twin Turbo T70's, Victor Jr Heads, 96lb injectors, Edelbrock Super Victor EFI intake, 90mm elbow, 75mm TB, 3" Pro-tube
  4. str8stang036

    Some trouble with idle and tip-in

    I posted this on stangtuning.com also. Stangnet has helped me a lot so I thought I would also try my issue with you. I am using the Anderson PMS for tuning, this is my issue: I got the car started back up after changing my turbo placement. I am having the same issues I had the first time I...
  5. str8stang036

    2-step wiring; need help

    There is a lot of great electrical info on this website. Maybe it will help. Category:94-95 Mustangs - Mustang-Tech
  6. str8stang036

    coil over question

    I have the UPR coil overs also with Lakewoods 50/50 and I called UPR to make sure I wouldn't screw up the strut by removing the cover. I suggest you do the same and even call Tokico to make sure they won't get messed up.
  7. str8stang036

    Need advice ear off block broke

    Maybe not cold welding, but mig welding may help.
  8. str8stang036

    What MAF to get for my set-up?

    Im with Redline on the DBX. Anderson ford motorsport has them.
  9. str8stang036

    Sounds like a cylinder isn't firing

    I just found the problem. Unplugged fuel injector. You guys make me think outside the box
  10. str8stang036

    Sounds like a cylinder isn't firing

    Finally got the car started and it sound like one of the cylinders on the driver side isn't firing. I can hear it in the exhaust and feel it when I put my hand against the exhaust. I changed all the plugs, since it had been a long time. The motor is new and has less than 10 miles on it...
  11. str8stang036

    Cranks but doesn't fire

    It just started! Turns out the positive primary coil wire was broken in one of the crimps I made. Fixed that and it started right up. Thanks to everyone for their input.
  12. str8stang036

    Cranks but doesn't fire

    Just did a few tests. I put a test light across the coil terminals and it did not flash. I then checked the TFI module and it gets power. I tested the PIP signal from stator to the module with a test light and it did not flash as I cranked the motor. I did hear clicking when I was back probing...
  13. str8stang036

    Cranks but doesn't fire

    Oh, yea it was a big boom, it made my ears ring for a few minutes. nothing was messed up because it is in the trunk. The charger doesn't let me know when its done charger, it just has 10amp and 2 amp setting. I put it on 2amp all night. Well I will get a new one and hopefully it doesn't blow.
  14. str8stang036

    Cranks but doesn't fire

    The weirdest thing happened today. I had left the battery charging over night and when I went to crank the engine it blew up! What would cause something like this? I know the battery was bad, but I have never seen one blow up
  15. str8stang036

    Swapped out cracked intake now A/C doesn't work

    It was the coolant temp sensor. Everything is fixed
  16. str8stang036

    Cranks but doesn't fire

    I am going to check it tomorrow because today the battery crapped out and I need another one. What is the quickest way to find TDC?
  17. str8stang036

    Swapped out cracked intake now A/C doesn't work

    I just finished swapping out my stock cracked intake for another stock one and most things seem ok. Weird thing is now when I start the car the fan is constantly running on high and the A/C doesn't work, only fan setting. My coolant temp sensor isn't working, could that cause the previous...
  18. str8stang036

    Cranks but doesn't fire

    The fuse 18 was ok, and all the other fuses in the engine box are ok also. I have not checked for spark yet, I will do that tomorrow. Also, if the coil gets constant I should be able to get voltage from it, correct? I checked it, and I didn't get any voltage. Weird thing is that I didn't...
  19. str8stang036

    My son is here!!!

    Congratulations! My daughter will be here in about 3 weeks.
  20. str8stang036

    Cranks but doesn't fire

    I am starting the stang up after months of reconstruction. The car cranks however doesn't even make an effort to fire. I did remove the distributor to install an new intake. So possibly it may be off. I also checked for voltage at the ignition coil and there is no voltage. Not sure why. I l...
Top Bottom
Back
Forums
Menu