Search results

  1. robbz28

    Soundproofing For Roof

    I almost used dynamat but like you I live in a hot climate and painted my car black and worried about it coming unadhered on one of these 100+ days. I just got some 3m foam fast adhesive and the factory style deadening material and glued the snot out of it and stuck it to the roof. Those...
  2. robbz28

    4 Or 5 Ply Leaf Springs?

    I have the 4.5 mid-eye grab a traks and love them. The factory springs had done got all soft on me
  3. robbz28

    Small Electric Fan For Ac Radiator

    Iskwezm is right...if you notice on most new cars the electric fan kicks on when the AC is turned on. I wired mine the same way...its on a thermostat as well and runs when the AC is on or when it hits 190 degrees.
  4. robbz28

    First You Tube Video

    Thanks doc...knock yourself out...just show me this video when you're done.
  5. robbz28

    Custom 1969 Mustang (pics) - What Cam Should I Use?

    If money is not a big issue, you may consider keeping the cam and upgraing the heads to something like a set of Patriot 180's. Get the use of the lift and duration of that camshaft to pull some air through that motor. I would imagine that, along with a port matched Performer RPM intake (or...
  6. robbz28

    Csrp Front Brake Swap W/spindles New

    Wish I would have found this when I was stumbling onto the pages of fleabay a couple years ago. I can't say that I'm dissatisfied with what I got, but it is quite a frankensteins monster that stops me every day...It was a little cheaper than the CSRP, but it basically was a GM kit that had an...
  7. robbz28

    1968 Mustang Floor Console Shift Indicator Light Adjustment?

    +1...easy fix, will make a shifter feel like new.
  8. robbz28

    Custom 1969 Mustang (pics) - What Cam Should I Use?

    First off, I love the color (amost painted mine a similar blue) and the big brakes look really sweet, those are on my list to get eventually, but my car stops now and thats good enough, not like we have a track anywhere NEAR me to even get to use them on anyway. About the cam...with the specs...
  9. robbz28

    Power Steering Pump Puking...

    Thanks...my pump did fine on the way home...got home and no leaks. As for my factory gauges...well they're moody. I have put in new sending units, a fancy electronic I've and sometimes they do right...I don't worry about them that's what the mechanical ones are for. Eventually I want to replace...
  10. robbz28

    Power Steering Pump Puking...

    I have a factory style thompson pump on my 67 coupe. I have replaced the control valve, all the hoses, and got a remanufactured pump and a new slave cylinder. It's even filled with the correct Type F fluid. It all works like its supposed to, but sometimes it has a fit and pukes fluid out of the...
  11. robbz28

    1968 Mustang Floor Console Shift Indicator Light Adjustment?

    wow...very much on point up there, here in Louisiana they don't even look at the car half the time...the last sticker I got the guy didnt even leave his office, he just signed the sticker, I signed the book, he took my 10 bucks and I stuck my own sticker on the car! However, they are welcome to...
  12. robbz28

    First You Tube Video

    I need some help with making a decision. I am thinking about doing some window tint. I love to be able to see the interior of old cars, I find that tint looks wrong on some classics (just because they didn't do much window tinting back in the 60's that i'm aware of). Anyway, my buddy wants to do...
  13. robbz28

    1968 Mustang Floor Console Shift Indicator Light Adjustment?

    Not sure the similarities, but if your 68 is like my 67 you will have to remove the console to get the bezel off. There are two screws underneath the little slide up door in the front and the rear has a stud with a speed nut on it you have to access from beneath the console to remove. I got wise...
  14. robbz28

    Is It Easier To Put The Engine And T5 In Seperate, Or Attach Them, Then Put It In?

    I want to just put my .02 in. I removed and replace both of mine at the same time by myself. I had very little issues. I also have a nice chain hoist with an adjustable pitch engine lift. I was able to angle the engine to make it slide in and out like it was supposed to. I had to have the car...
  15. robbz28

    First You Tube Video

    I have been gone waaaaaaay too long. I have been enjoying my car instead of workin on it. Until about 3 weeks ago, I developed a nasty transmission leak. I finally got under there and glued up the pan really good, got her fixed up. Also cut 1/3 of a coil of my springs to get that nose down to...
  16. robbz28

    Steering box slop

    I think before going through a new box and links and whatnot I will probably just convert it to borgeson or a rack (still don't know which one I want to do) But i have that job tied into the t-5 swap I have planned, heck i might put it all off until i can put a hotter engine in it, the 289 is...
  17. robbz28

    P/S control valve - stop pin removal

    Take some vice grips and give it hell....mine popped right out with a little wiggling, I had to get a new pin to replace it afterwards.
  18. robbz28

    Another voltage regulator thread 67 coupe

    I have had voltage regulator issues from the start, I bought a repop old school regulator and watched my needles jump for a couple of weeks before that one broke. I decided to get an electronic one (one of those off of ebay...modern voltage regulator) for 30 bucks. It came in the other day, I...
  19. robbz28

    67 Coupe Panel Alignment HELP!

    Any of those panels aftermarket? They don't hardly line up at all...even the good ones give fits. Sometimes you may have to find a happy medium and live with it. I have a dynacorn door on my passenger side and it fits OK...but the dynacorn door, along with an aftermarket front fender, made for a...
  20. robbz28

    Steering box slop

    No rag joint, got one of those good old 67's that will stab you in the event of a head on collision. I have had my wrench on the nut to give it a little adjustment, but just wanted to ask some folks first. Thanks
Top Bottom
Back
Forums
Menu