Search results

  1. my70stang

    hows it look in a 1970?

    check this out... we got the m otor in a few weeks ago and now that we fabricated a radiator support we got to bolt on the front end of the engine. -Randall's Rack Power Steering pump -smog reducer pulley (for the 1989 5.0 HO) -Classic Auto Air condensor wiring will still need to be completed
  2. my70stang

    engine in!!!

    check this out... we got the m otor in a few weeks ago and now that we fabricated a radiator support we got to bolt on the front end of the engine. -Randall's Rack Power Steering pump -smog reducer pulley (for the 1989 5.0 HO) -Classic Auto Air condensor wiring will still need to be...
  3. my70stang

    almost done

    yeah...it helps when you have your engine out to clean :D
  4. my70stang

    almost done

    thanks for the compliment :D
  5. my70stang

    almost done

    <img src="http://i80.photobucket.com/albums/j170/taylordstn/Mustang/droppingitinpass.jpg"> <img src="http://i80.photobucket.com/albums/j170/taylordstn/Mustang/droppingitindri.jpg"> <img src="http://i80.photobucket.com/albums/j170/taylordstn/Mustang/engineinpass.jpg"> <img...
  6. my70stang

    almost done

    my car is so close to done... this weekend we put in all new front suspension: a randall's rack and pinion kit new lower arms new shocks and springs (springs were a b**** to get on) and master power front brakes this week and weekend: the new cluth kit is going in (for the 89 5.0 and t-5...
  7. my70stang

    power steering

    thats what i hear, im happy i went with these guys
  8. my70stang

    power steering

    just ordered the new rack and pinion kit with pump from www.randallsrack.com!
  9. my70stang

    engine finished

    yea, hes kinda doing the Reenmachine, vette style, except in a garage
  10. my70stang

    engine finished

    and now the cherry on top...polished billet air cleaner
  11. my70stang

    engine finished

    its just the lighting, its all ford blue high temp paint
  12. my70stang

    engine finished

    heres a picture with all the good stuff attached
  13. my70stang

    engine finished

    well we have to drill a hole in the timing chain because the old location doesnt fit in my 1970 and i stripped the block down, cleaned every little corner of every part, painted them and bolted everything back together with a Fel-Pro gasket kit...the parts that i bought were a edelbrock 600 w/...
  14. my70stang

    engine finished

    a 1989 5.0, stripped down, cleaned, and painted. i love the assembling of new parts
  15. my70stang

    Steering Wheel?!

    i like the grant steering wheel, it was only 125 with all the assembly, cant remember where i got it, but i enjoy the look at feel of it
  16. my70stang

    frame to engine mount bracket and gasket ?s

    the 89 5.0 HO motor is stripped bare, painted and ready for completion. for putting the heads, intake manifold, and waterpump back on, am i going to need to use adhesive on the new gaskets? i was looking at some tips from the Fel-Pro gasket kit i ordered and it says to use an adhesive...
  17. my70stang

    frame to engine mount bracket and gasket ?s

    the 89 5.0 HO motor is stripped bare, painted and ready for completion. for putting the heads, intake manifold, and waterpump back on, am i going to need to use adhesive on the new gaskets? i was looking at some tips from the Fel-Pro gasket kit i ordered and it says to use an adhesive. if...
  18. my70stang

    Flowmaster vs. MagnaFlow?

    hey guys, im thinking about getting the magnaflows for my 70, but im not too sure what kind of headers i should get that will work best, should i just get shorty's, or tri-y's? plus, how much re-manufacturing, if any, was done to the tubes to make them fit?
  19. my70stang

    any classic with 5.0 EFI

    thanks markus, ill give that a shot
  20. my70stang

    any classic with 5.0 EFI

    hey all, what kind of induction system did you use? im getting a 5.0 with EFI and putting a trickflow track heat manifold and bbk 75 mm throttle body, all i need to finish it is the cold air induction system to finish the order. and another thing, what kinda exhaust set-ups do you have? i was...
Top Bottom
Back
Forums
Menu