Search results

  1. NO BRAKES

    dohc megasquirt tune needed

    thank you sooo much for your help! sounds like you reallllly know your stuff! i will try modding things when my injectors come back. i have found a "high display value" but nothing about high resolution in the read me portion. i have checked my plug wires numerous times. everything looks...
  2. NO BRAKES

    K member ?s

    i have the MM kmember and a arms. it is very pricey. but is well worth the cash. it is made up of square tubes, instead of regular round tubes. the square tubes make it more ridgid.
  3. NO BRAKES

    dohc megasquirt tune needed

    quoted from diyautotune.... You do NOT need this(flyback board kit) if you are using a MegaSquirt equipped with the PCBv3.0, this is only for PCBv2.2 users running low impedance injectors! because the megasquirt II version3 comes with the flyback board installed into the unit. how about...
  4. NO BRAKES

    dohc megasquirt tune needed

    and im running around 16* of timing at idle.
  5. NO BRAKES

    dohc megasquirt tune needed

    the wideband is an innovate with the innovate gauge. i dont have any idle surge. it idles around 800-900 and while it idles it pops every 8sec or so. kinda like it will run almost smooth then it'll pop out the exhaust. hoping that my issue was not fuel related is why i had asked if anyone had...
  6. NO BRAKES

    dohc megasquirt tune needed

    what the car looks like, so you know i have something here im dealing with.
  7. NO BRAKES

    dohc megasquirt tune needed

    currently i am set at 37#'s of fuel press. ive tried it all over the place. when the car first started, and you touched the throttle it died. now when you start the car it idles, and you can touch the throttle but it sounds like one big huge mess of detonation. it smokes out the garage...
  8. NO BRAKES

    dohc megasquirt tune needed

    i have the MS2 supposedly (what a ms guy told me) all i have to do to is change some settings to run low resistance injectors and im good. I talked to a dsm guy i work with and he had told me about the flyback board, but the ms guy i talked to didnt mention one. cause the MS2 should be able to...
  9. NO BRAKES

    dohc megasquirt tune needed

    well... for anyone that wants to know in the future.. i was able to test my injector leads with a noid light. each one of my injector leads pulses like they are supposed to. However... there are still cylinders that are not getting fuel. right now i am in the process of sending my injectors to...
  10. NO BRAKES

    HELP!!! seizied dohc.

    ive got a spare mark viii motor if ya wanna do the swap :D
  11. NO BRAKES

    Srange problem after dual battery setup

    did you check all fuses? or just the one for the cig lighter? sometimes the smaller fuses will be powered by the bigger 20/25 amp fuses in the same fuse box. its just something else to check. but make sure you put them back in the same position that they came out of. i cant tell you how many...
  12. NO BRAKES

    2 valve vs 4 valve

    +1 for the 4v
  13. NO BRAKES

    will this even work????

    yes and no. you can delete the imrc's and lengthen some wires(easier said then done) add a tune, and that should work. i know a guy that did it. depending on what year your car is, might need to have some options turned off i.e. PATS.
  14. NO BRAKES

    Srange problem after dual battery setup

    how long has it been that those solenoids have been used? did the car sit all winter, then you put the battery in.. and now coincidentaly the exhaust ports dont open now too. maybe they are stuck in place? adding a battery shouldnt hurt anything in your electrical system. if the first battery...
  15. NO BRAKES

    ATF leak thru shifter at high rpms

    long shot.... but try taking the 4 bolts out of the top of the shifter.. maybe there's a o-ring in there. when you removed the shifter did you take the whole thing off? or just the top part i described?
  16. NO BRAKES

    97 4.6 motor swap to 5.0

    build another mod motor.... push rods are a thing of the past. imo
  17. NO BRAKES

    Anti-theft going off intermittently.

    factory alarm?
  18. NO BRAKES

    HELP!!! seizied dohc.

    how much force were you able to put on the crank pulley? i had a car once that i couldnt get leverage on the crank and it wouldnt turn... but the power wire to the starter was corroded and broke off. maybe thats your problem. but.... lack of lubrication is a big downer for mod motors. did your...
  19. NO BRAKES

    dohc megasquirt tune needed

    anyone?
  20. NO BRAKES

    dohc megasquirt tune needed

    Ok guys... So i need MAJOR help. I know this is a slim chance. But does anyone have a tune for their megasquirt for a DOHC cobra motor with low impedance injectors i can have? I have been able to get mine to do nothing but idle since december. I have a fully built motor, gt45 turbo, ford...
Top Bottom
Back
Forums
Menu