Search results

  1. cobra1923

    Your opinion on different shock/strut setups

    I got Tokico blues for the front and one blew out after a year or so (maybe 3K miles).. replaced with Koni reds (front and back) and lover them. No issues with them yet. They are adjustable but have to be unbolted to adjust
  2. cobra1923

    complete turbo for 5.0 on ebay?

    I am curious what you guys think of this? $1250 turbo setup that bolts to stock headers? I've always been a supercharger believer, any thoughts? Please do not post links to active ebay auctions. For future reference, you may post the pics from the auction, as listed below. Matt Ps...
  3. cobra1923

    Keyless Entry Question

    I have a '95 vert GT that I need to program the remote on, I tore out all the trunk trim and can't find anything that looks like what's in the picture? Would the pins I need to jump be somewhere else in teh 95?
  4. cobra1923

    Thremostat Housing Bolt Broke!!!!!!!!!

    Sears sells this nifty little tool set that I have used to get many many many broken bolts out (Nissan exhaust manifold studs snap like pretzels). They are a reverse drill bit on one side (which often removes the broken bolt as you drill it). You only need to drill to the shoulder of the bit...
  5. cobra1923

    Idle Problems.. new thread for problems

    What cam are you using? I had a fox body that I ran a B cam (.480), 1.7 rollers and a 75MM BBk with a Pro M and always had a searching idle issue. I was changed everything and ended up drilling a 1/8 or so hole in the blade of the throttle body (top half of the blade) to allow a little more...
  6. cobra1923

    Stupid questions, BUT? Hissin, Grady, or Killer maybe you can help?

    I know I am jumping in on this late but my '02 2V has a quarter sized nipple on the front of the IAC that routes to a little plastic box that I can only assume is a filter of some sort and then 90 degree turn into the air intake tube (where it's getting the air from). It's obviously between the...
  7. cobra1923

    Stock 86-93 HO intake to 94/95 issues

    Awesome, just want to be prepared. As much as you try to plan and scheme, there's always something that will come up. I'll post some pics once she's all together.
  8. cobra1923

    Stock 86-93 HO intake to 94/95 issues

    Thanks for the response, I think if I remember correctly, the fox egr bolted to the egr spacer that the coolant lines ran through. I am thinking that I can just ditch the egr spacer. However, that spacer was like 2 inches thick, I am wondering if I will need to fab a spacer to put the elbow in...
  9. cobra1923

    1994 supercharged gt "bucks" randomly help!

    Not 100% on what the FMS/Powerdyne setup looks like but it sounds like you just lost a plug while it was under boost (popped it out). Gluing a new plug in should be fine. With that plug out it would allow unmetered air in and cause it to run poorly (computer would try to adjust for it). Did...
  10. cobra1923

    Stock 86-93 HO intake to 94/95 issues

    I picked up an extrude honed stock 5.0 fox body intake to put on my "low buck" 95 project. I'm getting an elbow adaptor, will I need to do anthing else with the internal Fox EGR system? The elbow should block off the internal intake portion of the EGR so I'm thinking everything should hook up...
  11. cobra1923

    Where are ABS speed sensors on 94-95?

    I've picked up a down and out '95 from a friend that needed some help. The ABS started acting up when he got the car back from the shop that put his gears in. Do the 94-95 use the speed sensor/ABS rings pressed onto the end of the axles (near the brake) or do they use a "tone ring" inside the...
  12. cobra1923

    Advanced timing issues?

    I did a timing adj on my '02 before I went to a predator tune and I got a LOW RPM misfire code. It was because the timing adj was not seated in fully and threw the crank out of balance enough to throw the code. I pulled off the timing adj, cleaned off all the sealer and dirt (to the point you...
  13. cobra1923

    Moved not NW PA and I need a drag track!!

    I grew up in Franklin PA and there's not much around there other than dirt ovals.. You'll have to drive to Pitsburgh or over to Ohio to Quaker City Dragway in Tallmadge (near Akron) or all the way out to Norwalk
  14. cobra1923

    BBk TB install w/ idle issue

    I didn't see any black rubber stuff? There was the gray coating to prevent buildup and I left it there? I think I need to attack the TPS voltage and see where it is first, then go from there. I will say that I think it dropped another 50-100 RPM today (could be in head though)
  15. cobra1923

    Surprised by Baer Brakes People.

    Those look great, they fill the wheel out well.
  16. cobra1923

    BBk TB install w/ idle issue

    I put in a 75MM BBk TB on my '02 GT. I already had a C&L plenum and everything ran great with the stock TB. The install of the BBK went easy and the car definately pulls a little more above 2500RPM but my idle is a little high now. I set the set screw according to the directions and it idled...
  17. cobra1923

    Engine problems please help!!

    Doesn't the '99 have variable intake runner length controls that get gummed up?
  18. cobra1923

    how do i remove the fuel line at the fuel rail?

    I think Sears even carries them. You can get cheap plastic ones for a couple of bucks or nice metal ones for a little more.
  19. cobra1923

    trouble codes for my '02 GT

    I think you're right. I seem to remember getting a similar code when I installed the timing adj way back when. I think I'll try re torquing the bolts and see if it helps. If not, i guess it's new balancer time.
  20. cobra1923

    Help with UPR catted X pipe

    You were right on the money. It was $6 at the Ford dealership. I used the short 2" piece inside the midpipe on the drivers side. No leaks and sounds awesome with the Flowmasters. now all I have to do is figure out why I'm throwing these damn codes... thanks
Top Bottom
Back
Forums
Menu