Search results

  1. Redsnake2

    White smoke.. Just damn!!!

    Hopefully I didn't F up one of the turbos on the initial start-up with out my oil scavenge pump.. There is no coolent in the oil so I'm good there.. But would that cause the car to sputter when I rev it???... Still gonna check the fuel injectors.. It maybe a duel problem...:bang: :bang:
  2. Redsnake2

    Fuel Line disconnect tool.. PITA!!!!!

    Oink I bought a scavage pump. works really well... As for the clearance issue I was worried at first, but its 8" of clearance between it and the ground. My front air damn hangs down 3" furthat than the turbo.. After I get the fuel pump done I have to fight with an injector stuck in the...
  3. Redsnake2

    Fuel Line disconnect tool.. PITA!!!!!

    OK this car has been fighting me the whole way. I run to AutoZone and grab some of those plastic fuel line thingys. I drop the tank tonight and read the instructions and follow them word for word.. Wrap it around the line push it in and pull the line and nothing.. JUST DAM!!!!!!!! So I...
  4. Redsnake2

    White smoke.. Just damn!!!

    ok I have come to the conclusion that I think one of my injectors is staying open.. because after the car sits for awhile it starts right up and runs at idle fine.. NO SMOKE!!! Then after you rev it about one or two times here comes the white smoke. Shut it down and try to restart it and it...
  5. Redsnake2

    New engine PICS!! Should be running this Sunday!

    OMG!!!! that's like internet ****!!!! :jaw:
  6. Redsnake2

    White smoke.. Just damn!!!

    Ok both turbos are in and spooling just fine. The Vacuum is about -20 at idle. When I first put the turbos in I didn't have a remote oil pump so oil pooled in the turbo and I had oil everywhere.. shut it down ordered the oil pump and got it mounted last night. Now when the car is running...
  7. Redsnake2

    how hard is it to change the oil pan

    would it not be easier to drop the K-member slightly than pulling the engine?
  8. Redsnake2

    how hard is it to change the oil pan

    well when I was putting in the T for the oil return.. I in my great wisdom I decided to weld it in.. Also in my great wisdom I didn't check the welders temp/amp from welding something thicker.. So I burned a hole in my pan, It's not leaking now cause i sealed it with some sealant that we...
  9. Redsnake2

    how hard is it to change the oil pan

    Ok you guys just sealed it.. I'M HIRING SOMEBODY...LOL
  10. Redsnake2

    how hard is it to change the oil pan

    that would be thinking...
  11. Redsnake2

    how hard is it to change the oil pan

    thinging about changeing my oil pan in my driveway.. how hard is it? do i have to do more than just unbolt the motor mounts and jack the engine?
  12. Redsnake2

    power steering pulley

    well the shorter belt is 90 inches and I have a smog pump i'm just going to though away if you want it
  13. Redsnake2

    power steering pulley

    Dammit stroker, i just ordered one from MPS for 20 bucks
  14. Redsnake2

    power steering pulley

    How much did they charge you for it?
  15. Redsnake2

    power steering pulley

    Ok I cracked the shaft on my power steering pump. So I ran out to AutoZone and grabbed a reman pump. Put it in and the Damn pulley slides right on.. DANG!!!! So I swear thay sold me the wrong part and I run back and get a refund.. Same for Pep Boys. Finally I run to Auto Advance and...
  16. Redsnake2

    how do i hook up my boost controller with a TT

    Thanks Tight I actually got the idea because i saw a lot of people that have hard lines, T'd off the same way with no problems. Plus I'm keeping my A/C and there is no room to do it any other way.. I'm more worried about the return lines, I may need an oil pump. We will see. If I get alot of...
  17. Redsnake2

    how do i hook up my boost controller with a TT

    I started one on TM but I got lazy.. I will go back and update it. I was going to do it on here but I hate the way the pics are stored and you run out of storage space real quick..
  18. Redsnake2

    how do i hook up my boost controller with a TT

    So i would be running a vac line to that port in the pic that is further left, from the manifold to that one right? Cause that would be very easy I could T off the line for my BOV and Manifold... Thanks alot man!!!
  19. Redsnake2

    how do i hook up my boost controller with a TT

    Ok here is the RIP.. I have the Boost controller pictured it's the TURBOSMART. But I'm running a twin set up with dual port wastegates. Now I know the lower port on the wastegate goes to the turbine compressor. The upper port on the wastegate goes to the controller.. Now with the controller...
  20. Redsnake2

    Which one is my low pressure switch?

    thanks MO
Top Bottom
Back
Forums
Menu