Search results

  1. 6

    Find TDC

    I am ready to stab distributer in my 408 Stroker.How do I make shure I'm on TDC. I had to install a late model timing cover for my March pulley system so the timing mark is on the left side.
  2. 6

    After Market Automatic Shifter

    I need info on a good shifter for my 69 Mach.It has the FMX Trany and also has a console.
  3. 6

    Help please I need info on 4.6 DOHC

    I have installed a 2001 Cobra engine in my 67 mustang and there are a few parts I still need. I need every thing from the intake out MAF, throtle body ect. I have found several on ebay but none for a 2001. What other years would interchange. Does anyone have these parts laying around to sell.
  4. 6

    Help I need info on 4.6 DOHC

    :bang: :bang: I have installed a 2001 Cobra engine in my 67 mustang and there are a few parts I still need. I need every thing from the intake out MAF, throtle body ect. I have found several on ebay but none for a 2001. What other years would interchange. Does anyone have these parts laying...
  5. 6

    what throttle body.

    It had the DHOV in it when I bought it.
  6. 6

    what throttle body.

    2001 dhov
  7. 6

    what throttle body.

    I have installed a 4.6 cobra engine in my 67 shelby. I need a stock throttle body and a MAF for it. What year models will interchange. I can use a lot of help on this project.
  8. 6

    Wiring harness for 2001 cobra to 67 coupe

    Does anyone make a wiring harness for a 2001 4.6 Cobra motor to a 67 Mustang. I do have the stock Cobra harness but it looks like I could save a lot of time and problems with a kit.
  9. 6

    7 or 9 hole water pump

    Does anyone make a water pump with 9 holes that is reverse rotation.
  10. 6

    7 or 9 hole water pump

    My dipstick is in the timing cover isn't the new model winsors in the block.
  11. 6

    7 or 9 hole water pump

    Ok I need to figure out which water pump I need. I have 77 351 Winsor block with 9 holes in the water pump. I am using march SERPENTINE 30330 conversion and it specifys 79-95 reverse rotation water pump. From what I have found out that water pump has 7 holes.Help please
  12. 6

    331 build-up: periodic update

    7 hole or 9 hole water pump Ok I need to figure out which water pump I need. I have 77 351 Winsor block with 9 holes in the water pump. I am using march SERPENTINE 30330 conversion and it specifys 79-95 reverse rotation water pump. From what I have found out that water pump has 7 holes.Help please
  13. 6

    SERPENTINE belt conversion

    Kelton looks great. I can't tell do you have a fan or electric fan
  14. 6

    SERPENTINE belt conversion

    If I go with a factory setup does anyone have good pictures of the pulley setup.How many groves does the crank pulley have, the water pump,AC,powersteering ect.
  15. 6

    Pictures of master cylinder and brake lines

    Help I am in a total restoration and I'm not shure how to route the brake lines.It's been 2 years since I took it apart and my memory sucks. :shrug: The manual shows where they go but not how they were routed.Any pictures would be a big help.
  16. 6

    SERPENTINE belt conversion

    looks like I will be going with a electric fuel pump. Any sugestions whose system to use. Can you see the pulleys after the fan scroud is on.
  17. 6

    SERPENTINE belt conversion

    :shrug: I am trying to convert to a SERPENTINE belt system on my 69 Mach 351W with AC and power steering I also would like to keep a mechanical fuel pump.I talked to March pulleys and they don't have a kit that will work.Has any one done this on their car.
  18. 6

    which spark plug

    I don,t have a manual for the MSD 6 AL ,can anyone help. Anyone have Roush heads,how do you like them.
  19. 6

    which spark plug

    :shrug: What would be a good plug to use on my engine and what gap.
  20. 6

    Right Torque Converter

    I checked tire size and I don't think I can get more than a 25.6" tire under the fenders. So if the RPMS get below 2800 will will the converter slip.
Top Bottom
Back
Forums
Menu