Search results

  1. OL' WHITEY

    Intake Install. No Heat!?

    Okay, problem solved. The heater core was a little clogged up. Put the water hose to it and flushed it out. I got heat again! Yeah baby!
  2. OL' WHITEY

    Leaking water

    The last time I got a pump from the Ford Dealer, they gave me the wrong gasket. I had a hard time convincing them that it was wrong because their computer said that the part was correct for my car. All the bolt holes lined up perfectly, but the gasket was still not right. After much arguing...
  3. OL' WHITEY

    uuuuuuuugggggghhhhh! hazards work but turn signals dont? WTF?

    Is your heater fan cutting out when your signal quit working? I know this sounds stupid, but that's what mine did and it was the ignition switch. If you determine it's not your ignition switch, I'd think seriously about replacing it anyway. They tend to cause lots of freaky electrical...
  4. OL' WHITEY

    Is this 5 lug conversion kit good?

    Your booster is fine. You can keep your master cylinder if you're leaving the drums in back and just converting to the standard 94-95 calipers/rotors in front. Braking won't be affected much. That's how mine is right now. A '93 cobra MC conversion and an adj. prop valve would help out a lot...
  5. OL' WHITEY

    Anyone used dynamat/fatmat before? Opinions?

    I'm not sure about the weight. A roll of the stuff weighs a couple of pounds. I wouldn't see using more than 5 or six rolls in a fox car.
  6. OL' WHITEY

    Intake Install. No Heat!?

    Thanks, jrichker, That was going to be my next plan of attack. I guess you just take the one big fitting off the top of the manifold and take the other hose loose from the pump and flush through the metal piping and all? I'll try that and we'll see what happens. I'll let ya'll know what I...
  7. OL' WHITEY

    Intake Install. No Heat!?

    Last March, I had a local performance shop to install a Cobra intake on my ride. I noticed that after the install, my heater didn't put out much hot air.:shrug: It was spring and warmer weather was on its way. I just assumed they put in a 160 degree thermostat and that was the reason for my...
  8. OL' WHITEY

    Is this 5 lug conversion kit good?

    Most likely uses the Lincoln rotors which will limit your wheel selection unless you want to run the fronts with no dust caps. There are ways around this, but they involve machining the wheels or rotors, modifying the dust caps or using wheel spacers. This is a hassle and wheel spacers are not...
  9. OL' WHITEY

    Anyone used dynamat/fatmat before? Opinions?

    Try Peel and Seal. It's a roofing product that is MUCH chaper than either dynamat or Fatmat and is pretty much the same thing. It's available at your neighborhood Home Depot. The product consists of an asphault material sandwiched between an adhesive and an aluminum outer surface. I used it...
  10. OL' WHITEY

    What does gear whine sound like?

    Could the mid pipe be a little too close to the frame rail? I had a weird vibration like this and it turned out to be that.
  11. OL' WHITEY

    Bolt ons that actually help gas mileage?

    If you change to the 3.73's and don't change the speedo gear, your mileage will be much better! Well, at least it will seem like it.... To throw a spin on this subject, I saw improved city mileage with the 3.73's. Many others have reported the same gains. I wonder if this could be due in...
  12. OL' WHITEY

    Loud Ticking/Chirping Sound coming from engine.Need help.

    My power steering pump whines so bad it sounds like an S trim!
  13. OL' WHITEY

    Best fitting catted X-pipe for Fox?

    My Bassani is a one piece unit. I absolutely love it. Not cheap, mind you, but worth every penny. Fits like a glove. No leaks. Beautiful welds. That X is a work of art! Get the Bassani and you won't regret it. Oh, and it sounds great too.
  14. OL' WHITEY

    Is it worth getting a msd ignition , coil, and wires?

    No problems with my blaster coil except that it made a funny whining noise for the first couple of weeks. I mysteriously quit doing that, though...or at least I don't hear it any more.
  15. OL' WHITEY

    Best H-Pipe for the Fox?

    If you go BBK, beware that they tend to hang really low. If your car is lowered, you stand a chance of whacking it on stuff, bending it and makeing it leak. Just be careful.
  16. OL' WHITEY

    who has had a muffler shop weld in their subframe connectors?

    Did it myself. Yeah, I did a good job. Steeda full lengths. No problems.
  17. OL' WHITEY

    03-04 conra rim on fox will they fit ????

    '95 spindles on mine. Kept the drums as well. Flip the quads. Had to run rack limiters up front.
  18. OL' WHITEY

    show us your white fox body mustangs

    Here ya go: http://i16.photobucket.com/albums/b36/roadstr6/Pc140271.jpg http://i16.photobucket.com/albums/b36/roadstr6/Pc140270.jpg http://i16.photobucket.com/albums/b36/roadstr6/Pc140269.jpg
  19. OL' WHITEY

    Starter is thrashing my Flywheel

    No shims on mine. I got the PA Performance mini starter when my factory mini starter went south on me. No problems whatsoever with it.
  20. OL' WHITEY

    pic post test

    Pic post test
Top Bottom
Back
Forums
Menu