Search results

  1. bhuff30

    Great - PATS problem

    Wow, my head hurts. You just need to get new keys and have them programmed for your car. No need to replace anything. Ford obviously knows how to do it, and can certainly do the job. Since the car is there now, you might just want to let them handle it. There may be others who can program keys...
  2. bhuff30

    Digital Tuning Wanting to buy a tuner...

    In my opinion, if there is someone local you can trust, you are usually better off. They will have the correct tools to check the tune... like a dyno and a wideband O2 sensor. Otherwise, the tune is purely guess and check by mail order, and it could be way off and you'd never know it. Sure...
  3. bhuff30

    Engine swap

    What engine is the 324 based on? If this is a bored and stroked 4.6, then it should be straight forward and makes sense. If you are talking about anything else, including the small block ford, then it will be a lot of work and probably isn't worth it. Maybe a few comments about your goals...
  4. bhuff30

    Idle hanging when shifting?

    It is fairly common with the 4.6 to have a hanging idle. They were programmed with quite a bit of airflow between shifts and even when at idle while moving. While it is common, there are a couple things you can do to tame it. Some IAC valves are worse about a high idle than others. If you aren't...
  5. bhuff30

    they are talking close to 6 bux gal

    How about we reduce consumption instead of complain about gas prices? Everyone here knows oil is a limited resource, yet they continue to demand big trucks and SUVs that get 12-18mpg. I paid over $7/gallon for diesel when I was in Germany last May. Gas prices were lower at that time, plus...
  6. bhuff30

    Forced Induction 00 kenne bell bucking issues

    Checking for codes would be a good start on the bucking issue. And from what you've said, it doesn't sound like a shop I would want to do business with. I'd look around for someone else.
  7. bhuff30

    If you could have 2...

    I would probably get a 2013 Boss 302. I would actually rather have the boss than the GT500. The GT500 is a big heavy bruiser that just can't put the power down. I like the balanced approach of the boss, plus all the track and handling extras. :) If I had a boss, there wouldn't be much need...
  8. bhuff30

    Info on tires

    Check the manufacture recommendations on the specific tire you want to run. You can find the recommned, minimum and maximum wheel width for tires on tirerack. As I recall, you can run a 275 on a 10.5" wheel. The tire will look streched out to fit on the 10.5" wheel since the natural width is...
  9. bhuff30

    Engine motor ideas need help

    This is a very open ended question with a million possible answers. How about defining some goals for horsepower, cost ect? The stock shortblock is good for 425-450rwhp. With no other modifications, a turbo with moderate boost could easily take you right up to that power level. That can make...
  10. bhuff30

    Drivetrain Need help fast please

    Is this a new issue? Just started when you lowered it? The first thing comes to my mind is a loose nut ontop of the strut. That could be a SERIOUS HAZARD if that's the case. Either way, you'll want to get the nose in the air and start wiggling parts. Check ball joints, nuts/bolts on the...
  11. bhuff30

    2003 GT P0171 code

    Could be any number of causes. A good start would be cleaning the MAF as dirt/oil can cause quite a few issues. This should give you a bunch more ideas of things to check: http://www.obd-codes.com/p0171
  12. bhuff30

    Drivetrain 4r70w acting up

    Automatic transmissions tend to self destruct when a problem begins. They will start slipping or acting poorly on a certain shift which causes slip... which makes LOTS of heat. The heat then makes the issue worse and causes wear at other parts. If the issue can be identified and fixed very...
  13. bhuff30

    Resonate noise from IAC valve

    Gasket is good, bolts are tight. I inspected the hoses and they were all in good shape. Unplugging the IAC, the noise goes away. Squeezing the hose and the noise goes away. I replaced the IAC and all is fine now. I was reading that the ford IAC operates at 320 hz. The factory resonator...
  14. bhuff30

    Resonate noise from IAC valve

    I am getting what I would described as a resonate noise from the IAC valve. At the same time, the IAC isn't controlling the idle speed well... it is unsteady, fast, and even died once. Anyone had this happen before? This is on my 97 GT. At idle or light throttle conditions, the engine...
  15. bhuff30

    2003 GT needs a new home

    Yeah, I would agree it should fall in line with an NADA or KBB value. While you might be able to get more if you hold firm and find the right buyer (ie: sucker), you'll likely sit on it for a while. Nothing to special or unique, and your mods aren't adding to the value.
  16. bhuff30

    Engine Mishimoto radiators?

    The original radiator on my GT is starting to seep at the end tank. I was planning to get a stock replacement. I'll probably buy a Spectra radiator from rock auto. The price is right and I am sure it'll cool plenty well for a stock setup.
  17. bhuff30

    May have found the one...

    That's a very low mileage, but you might want to consider if the car sat for long periods of time without being driven. That can easily be more damaging than racing the car. Seals dry up, gas goes stale, grease settles away from critical bearings ect ect. You may find once you start driving...
  18. bhuff30

    Engine Power gains from this....

    Said well by someone who has obviously never raced seriously. I yanked the AC on my 88 mustang, and later on the entire heater box. A drag car will be taken apart frequently for modifications, repairs, ect. The simpler it is to work on, the better. If you are at the track and break...
  19. bhuff30

    FORD RACING M-4204-F288

    With an auto and less than 450rwhp, I would stick with 28 spline. If you were making 300+ and drag racing with a stick, it'd be a good idea. Drag radials and manual transmissions shock load the drivetrain pretty hard and the axles are the weak point. Plus, you may be required to get rid of...
  20. bhuff30

    Replacing the hose on my fuel pump?

    The j-yard is always a good source for little things like that. Or check https://www.rockauto.com/ I saw a complete pump and sending unit low as 108+shipping. Do a quick search for discount codes and you can always get 5% off. I have given them so much of my money, it isn't even funny.
View older results
Top Bottom
Back
Forums
Menu