Search results

  1. craigwhite89gt

    Granatelli K Member / A arms problem

    i said the same thing.. but i have to have the a arms the right way cuz my sway bar mounts to them
  2. craigwhite89gt

    Granatelli K Member / A arms problem

    Here is a pic before i moved it back about 3/8 of an inch
  3. craigwhite89gt

    Granatelli K Member / A arms problem

    yes
  4. craigwhite89gt

    Granatelli K Member / A arms problem

    Yea only my driver side rubs i beat the K member back as fas as i can.. It helped a little. I may need to notch the bolt holes. From my research ive found it sounds like they designed these to move the wheels 3/4"farther forward (retarded) .. The only reason i put this thing on is i got it...
  5. craigwhite89gt

    Granatelli K Member / A arms problem

    lil bump
  6. craigwhite89gt

    running rich

    whats done to the fuel system? injectors? Mass Air?
  7. craigwhite89gt

    Granatelli K Member / A arms problem

    Figured i would just ask on here and see if anyone else that installed one of these had a problem with the front wheel/ wheels being too far forward, too where it rubs when you turn...
  8. craigwhite89gt

    No brakes after install's

    OK here is the deal .... No leaks....Bleed system noticed i had e brake up after bleeding... BUT before i go and do it all again... With my bleeders closed shouldnt my pedal get hard to push cuz i can push it to the floor over and over and over or is that jus a sign of air and i should do it again?
  9. craigwhite89gt

    No brakes after install's

    Im goin to check everything over now and re bleed thanks for the input
  10. craigwhite89gt

    No brakes after install's

    yea i know but you still had brakes tho. Im in the process of getting my rear discs and Master cyl. But i want to test my car out and run it down the road. It should have some brakes.
  11. craigwhite89gt

    No brakes after install's

    Ok well i put 73 MM calipers and slotted rotors, stainless lines. Also a Trickflow Track heat intake 75 MM TB and 1 " spacer. My father and I bleed the lines. I start the car. Start backing up and almost hit the garge door cuz i have no brakes. Pedal went right to floor. Any ideas here...
  12. craigwhite89gt

    Twisted Frame/body??

    damn
  13. craigwhite89gt

    Twisted Frame/body??

    Ok I have a good right now to belive that something is wrong ... A while back I noticed my hatch was not straight. After racing. So i tried to adjust the hatch as good as i could. And put sub frame connectors on.... Now i just got done redoing my entire suspension. I put Granatelli K...
  14. craigwhite89gt

    What is this for (Vac lines/wiring??) pic

    Thanks
  15. craigwhite89gt

    What is this for (Vac lines/wiring??) pic

    Thanks that helps out... OK now i dont have my smog pump anymore or A/C So can i get rid of the TAD and TAB ? Or am i gonna screw stuff up?
  16. craigwhite89gt

    What is this for (Vac lines/wiring??) pic

    jus curious to what this crap is...
  17. craigwhite89gt

    Bump Steer Kit Problem

    Ok with my kit spun as short as i can get it. It is still longer than stock. Making my wheels look like they are turning away from each other. The threads inside the damn thing dont go all the way thru cuz its 2 diffrent sizes on each end...
  18. craigwhite89gt

    Bump Steer Kit Problem

    I got a slight problem... I have a Competition Engineering Bump steer kit. Went to put it on and in order for me to get this thing to work right i belive i need to cut down the end of the rack 1/4" atleast in in order for me to get it where it was when it was stock becuase it is bottoming out...
  19. craigwhite89gt

    4-lug wheel spacers?

    www.brothersperformance.com "baer billet wheel spacers 4 or 5 lug 1/4 to 1"
  20. craigwhite89gt

    What it takes to run 13.00 w/89 GT

    Look up strike force on ebay ... you can see the heads on there or .... http://www.pbmperformance.com/downloads/PBMcatalog2005_71_104.pdf ...
Top Bottom
Back
Forums
Menu