Search results
-
R
crank or wheels????
400 hp was to be the limit w/my build but after all that i'm left with 300hp:shrug: I don't know it just must be due to all the compression that i now have from the pi/cam swap and the blower??- rw98gt
- Post #5
- Forum: 1996 - 2004 SN95 Mustang -General/Talk-
-
R
crank or wheels????
BBK75mm throttle body, C&L plenum, powerdyne supercharger w/11 lb pulley, PI heads w/comp cams 270's and beehive springs, PI intake, 42 lb fuel injectors, 90mm MAM, 2200 stall converter w/trans cooler.- rw98gt
- Post #3
- Forum: 1996 - 2004 SN95 Mustang -General/Talk-
-
-
-
-
-
-
-
R
crank or wheels????
:eek:I know this has been asked many times but i just had a lot of work done to my car and i was expecting a lot more power out of my setup than i got. i have read and heard that the stock bottom end on my 98gt is good for 400-450hp but i'm confused is that rated at the crank or at the...- rw98gt
- Thread
- Replies: 6
- Forum: 1996 - 2004 SN95 Mustang -General/Talk-
-
R
how much should i see??
:nice: yea, my compression will be exactly 10.6.1 due to the pi heads and non pi bottom end. the pistons are different size on the non pi (larger"i think") squeezing more compression than the stock pi motor. however i'm not sure what the compression will be with the blower. well i'm going...- rw98gt
- Post #9
- Forum: SN95 4.6L Mustang Tech
-
R
how much should i see??
the compression will be bumped up to 10.6 and thats why i ported the exhaust on the heads it will help with that issue (or thats what mike dez told me from dez racing) he has a great reputation and i trust him. as far as what the #'s were before w/a 6lb pulley it only put down about 230hp to the...- rw98gt
- Post #4
- Forum: SN95 4.6L Mustang Tech
-
R
how much should i see??
hey guys i droped off my 98 gt about 2 weeks ago for some upgrades and i should be getting it back this week some time but i'm curious as to what you might think on how much hp my car will make. so i'm putting in a 2200stall converter,trans cooler, pi intake, pi heads(only ported the exhaust...- rw98gt
- Thread
- Replies: 9
- Forum: SN95 4.6L Mustang Tech
-
R
PI Cams and Intake
sorry, i didn't know, i was just trying to help him out. i have never pmed anyone before but i will in the future.- rw98gt
- Post #12
- Forum: SN95 4.6L Mustang Tech
-
R
PI Cams and Intake
i have a nice set of pi cams in awsome shape from an 02gt w/32k miles on them i'll sell them for $100. i bought the complete set of 02 headsand had them redone with comp cams 270's and bee hive springs and they are romeo heads. when i had sent the heads out to be done the guy told me that the pi...- rw98gt
- Post #9
- Forum: SN95 4.6L Mustang Tech
-
R
to go 4 valve or not?
i'm thinking about a 4valve swap. currently i have a gt w/aode and i'm wondering how difficult it would be to do the swap i'm no master tech. my car is supercharged pushing about 11 lbs, BBK 75mm throttle body, C&L plenum, 80mm mas, 30lb injectors w/diablo sport tune. i'm thinking i have...- rw98gt
- Thread
- Replies: 2
- Forum: 1996 - 2004 SN95 Mustang -General/Talk-
-
R
powerdyne pulley change
i used a strap wrench and it was extreemly easy to do, i should of did this 2 1/2 years ago.- rw98gt
- Post #3
- Forum: SN95 4.6L Mustang Tech
-
R
my car is sounding like a truck
well got my car fixed and yea it was the rear end bearings $980. ouch!!!!!- rw98gt
- Post #7
- Forum: SN95 4.6L Mustang Tech
-
R
should i close the gap??
thanks guy's thats all i waunted to know. i was thinking the opposit the smaller he gap the better the burn.- rw98gt
- Post #16
- Forum: SN95 4.6L Mustang Tech
-
R
should i close the gap??
i just came accross a set of denso iridium spark plugs i had in my basement(i never used). they read ULTRA FINE 0.4mm IRIDIUM U-GROOVE TAPPERED CUT IT16#4 5325#4 125 does anyone now if these will work and if so should i gap them .032 or will i just have to buy some thing else like...- rw98gt
- Post #10
- Forum: SN95 4.6L Mustang Tech
