Search results

  1. Beasly B

    Dynotuned - Average Results

    thanks for the info millhouse, I just had a chance to sit down and check this all out. I did some more reading on how my pcv is supposed to be run, according to procharger specs. The throttle body tube is capped off, the filler tube vent is run to the pcv and "T" off to the fenderwell no farther...
  2. Beasly B

    Dynotuned - Average Results

    millhouse, do you have a website for (gasp)? I just installed my p1sc kit and it came with hoses to route the pcv out into the atmosphere, I now I have dipstick, and valve cover oil leaks. How does this pcv work differant than the stock one? Will it stop my oil leaks?
  3. Beasly B

    Horizontal intercooler? Will I rip it off?

    After a fight since march I finally got my procharger kit today, I will be installing it saturday. I was looking at the instructions on how the horizontal intercooler is mounted under the car and it looks like it could be ripped off or damage pretty easy. Does anyone on here have this setup or...
  4. Beasly B

    Is there a way to make the C&L 73 MM MAF work with my combo without a custom tune?

    There's no reason that I can think of why it won't idle unless a faulty meter or wrong sample tube. I had a cl 73mm for 30lb injectors on my car before this setup and it ran fine without a tune. There must be something up with your setup thats giving you trouble. I can say that when I switched...
  5. Beasly B

    Hypereutectics and 12lbs of boost?

    I guess I'll stick with the 9lbs til the next motor, hopefully it will last for a year or so.
  6. Beasly B

    Hypereutectics and 12lbs of boost?

    Would it be safe to run 12-14lbs of boost on a stock hypereutectic bottom end with about 35k on it? I want to run more than 9lbs of boost but not sure if it's safe, anybody who's running boost on a hyper motor or has any opinions let me know what ya think.
  7. Beasly B

    AFR'S 165 Q's

    thanks mine are the 60cc (1472) I've had them on for about a year and a half now and wondered sometime but never really researched it, now I know, thanks again
  8. Beasly B

    AFR'S 165 Q's

    Is there anyway to tell if they are 58cc or 61cc? I bought mine second hand and I know they are 165s but don't know which ones.
  9. Beasly B

    Engine torque link?

    Anybody using the engine torque link on their car for the street? I've seen chains used to limit engine movement, but never the actual torque link sold in jegs and summit. Just wondering how it feels on the street when I finially get my procharger I was thinking about either doing the chain or...
  10. Beasly B

    97 to 99 cobra motor swap?

    What's involved with swapping out a 97 cobra motor to a 99 cobra motor? Has it been done? I have a buddy who wants to do this and install a Kenne Bell on it and sell his P1sc kit for the 97 motor. He blew holes in every cylinder with only 500 miles on it for the second time.:nonono: One of the...
  11. Beasly B

    How to put 10 or10.5 rims on rear of fox

    i had an 88 gt with 10" weld wheels on the back. they were on there when I bought it so I don't know the back spacing but it had a small spacer on it and no quads of course. the tire size was a 265 50 15 you can do it with the right back spacing. they didnt stick out and they were wide it looked...
  12. Beasly B

    TKO 500 syncro's bad?

    just talked to DD they said it's the syncronizer rings, they are about 18 bucks a piece, which isn't bad but it's the point of pulling out a new transmission and tearing it down. I bet next time I'll break it in right. They said the break in is very critical
  13. Beasly B

    TKO 500 syncro's bad?

    I have my clutch so that it's at the top of the pedal, I have had the fluid to change it with but I havent done it yet because if I need to pull it out I don't want to waste the $35 bucks in fluid if it won't help.Maybe Ill call DD performance and see what they say.
  14. Beasly B

    TKO 500 syncro's bad?

    My tko 500 has about 2300 miles on it, at high rpm's and a hard shift 2nd and 4th will grind. At all other rpm's it seems fine but when I'm really running it, those two gears grind. I probably wasn't as good to it on the initial break in as I should have been and ran it 5 times this spring at...
  15. Beasly B

    Where did you install your wideband oxygen sensor?

    mine is in the x pipe just behind the collector on the driver's side, I didn't want to drill a hole in my longtubes, so that's where I put it seems to work fine.
  16. Beasly B

    codes 26 and 33

    also I have had the car to run lean at idle and I added fuel in the idle menu, it fixed it right then but when I went down the road and went to stop it went way rich and stalled the car, so I took the fuel back out and it ran okay. Sometimes it won't idle the same afr.
  17. Beasly B

    codes 26 and 33

    will codes 26 and 33 cause car to run crazy somtimes and alright others? It has just started doing this in the past few weeks, sometimes it has the idle surge and when your riding down the road and sink the clutch in to turn or stop it will idle up and down or twice it has cut off and I had to...
  18. Beasly B

    I am in trouble

    It's not that bad just put the spring into place and jack up the a arm it will work. Done it numeruous times
  19. Beasly B

    I am in trouble

    just take the strut loose and drop the a arm down all the way and take a prybar and pop out the old spring and the new ones are shorter so they slide in pretty easy then take the jack and jack the a arm back up and install the strut bolts works pretty easy
  20. Beasly B

    Stalling when downshifting, suggestions?

    where is the vss located? I just started having the same problem with my car when I sink the clutch in it dies down and starts idling up and down it may be a pms adjustment or that vss sensor, not sure because I haven't run the codes yet. But just wondering where it's at
Top Bottom
Back
Forums
Menu