Search results

  1. J

    Intake Gaskets? WHICH ONES??

    Sounds simple enough, Mike. Seems like the guys having the most problems are those with Aluminum heads and aftermarket intakes? So a cast set of GT 40s or E7s mated up to an GT 40 lower should seal just fine if the steps are followed as you outlined? If you had a second choice for a...
  2. J

    Intake Gasket?

    I was getting ready to do an H/C/I swap on my 95 GT. I was told to use a Felpro 1250 gasket for the intake as my heads were also port matched to that gasket. However, I keep reading about so many guys that had head gasket leaks and failures that I don't know what to do or think. Ford...
  3. J

    Intake Gaskets? WHICH ONES??

    I was getting ready to do an H/C/I swap on my 95 GT. I was told to use a Felpro 1250 gasket for the intake as my heads were also port matched to that gasket. However, I keep reading about so many guys that had head gasket leaks and failures that I don't know what to do or think. Ford...
  4. J

    Looking for pics of rides with 17x10 deep dish wheels?

    Did the 17x10 deep dishes and the 315's interfere in anyway with the exhaust? I concerned about them rubbing on my tailpipes??
  5. J

    Looking for pics of rides with 17x10 deep dish wheels?

    I would like to see a few pics of guys 94' or 95' stangs with 17x10's and the 315 rubber. I'm having a hard time deciding as to which to go with. 17x9 with 275/40 rubber or 17x10's with 315/35's. Wouldn't mind a side picture of the car and a picture from the rear showing the entire back...
  6. J

    80mm MAF and 24lb injectors from 96' Lincoln mark 8?

    HI There, I will be doing a heads, cam and intake upgrade to my 95' Mustang GT. I as wondering if the MAF sensor and 24lb injectors will work on my car. The MAF has a part number of f50f-12b579-aa and below that afh80-01 - the calibration code is 4m21. It comes from a 96' Lincoln Mark 8...
  7. J

    17x10.5" bullit wheels on 95 GT?

    Holy Crap. That looks mean. Did you have your car dynoed? I was looking at your webpage and I have almost the exact same engine setup that will be going in this spring. I've got a set of Thumper GT 40's with stainless undercut 185/155 valve, gt 40/explorer intake, E303 cam, 65mm TB, stock...
  8. J

    17x10.5" bullit wheels on 95 GT?

    Ahhh I see. Your car is lowered? That would most likely give it some clearance issues with them big meats. So a stock suspension'd car should have NO CLEARANCE issuse with a 315 tire and 17x10.5 rims? What is the offset of your wheels? AM claims the offset of the bullits to be 6.8"
  9. J

    17x10.5" bullit wheels on 95 GT?

    Thanks for the pictures. That looks friggin' bad ass. Just the look I'm looking for. According to AM, they claim they are a direct fit and should be any problems, but seems like yo had to do SOME mods to get them on there right? Do you get any rubbing when carrying passengers or going over...
  10. J

    17x10.5" bullit wheels on 95 GT?

    I am looking at a set of wheels for my 95' GT. I was thinking about a set of 17x10.5 Bullit wheels with 315/35/17 rubber from American Muscle. Chrome Deep Dish Bullitt Wheel 94-04 (17x10.5) at AmericanMuscle.com - Free Shipping! but I can't seem to get a straight answer from anyone if...
  11. J

    Largest rear 17" tires on 95 GT - REAR?

    I will be running stock ride height. Is a 275 a better choice?
  12. J

    Largest rear 17" tires on 95 GT - REAR?

    So you have no rubbing issues at all with 315's? Was thinking about some chrome bullits as well.....
  13. J

    Largest rear 17" tires on 95 GT - REAR?

    Me likey.....which wheels? Satin Cobra R's??
  14. J

    Largest rear 17" tires on 95 GT - REAR?

    Does anyone have any pics of their cars with 17x10.5's or 17x9's" with 275\40\17 or 315's?? I'd like to see how they fit if someone could oblige. I was gonna go with 17x10.5 cobra R's in the rear with 315's but it sound like tire choice is limited?? Any help is appreciated...
  15. J

    Largest rear 17" tires on 95 GT - REAR?

    I was thinking about replacing the rears with 17x9" wheels with 275/40/17 tires. My concern is that they will rub or be close to shock or exhaust tailpipes. I guess as long as the rims have the correct offset, they should be fine?
  16. J

    what plugs to use with GT 40 heads?

    Yes the heads are the Iron GT 40's.
  17. J

    what plugs to use with GT 40 heads?

    Are these the same plugs a 93' Cobra would use?
  18. J

    what plugs to use with GT 40 heads?

    Are these the same plugs as the stock heads would use?
  19. J

    what plugs to use with GT 40 heads?

    Getting some GT40 heads for my 95' GT and just thought of something......what plugs will I need for these? Will they take the same stock plugs as the E7 heads use, or do I need something else? :shrug:
  20. J

    Do I need 24lbs injectors? 95 GT

    There may be a pile of cams available for the 5.0, but how much difference will each of them have with close to the same duration and lift numbers?? There probably are more "performance" oriented cams, but this is going to be a daily driver/street car? What cam would you recommend?
Top Bottom
Back
Forums
Menu