Search results

  1. mustangdaren

    just put on some 42 lbers, can i ditch the FMU even without a tune??

    Take it to a shop with a Mustang dyno so the car can be put under a load for tuning. It is more like rear world driving compared to a dynojet. I plan to put a 4 bank SCT chip in mine and have it dyno tuned. I was going to go with a PMS II but I'll come out way cheaper with the SCT chip. The dyno...
  2. mustangdaren

    Is my stock T-5 going to blow?

    It would cost you as much as a TKO to beef it up and the TKO would still be better due to a stronger case.
  3. mustangdaren

    just put on some 42 lbers, can i ditch the FMU even without a tune??

    I have been running 42's for 3 years with no FMU and no tune. The car runs fine and has no hot start issues. It could still use a tune to get rid of a lean condition. Don't assume because you have big injectors without a tune it will run pig rich. Mine runs way lean at idle and part throttle and...
  4. mustangdaren

    What's the best ignition box??

    I have had no problems with my MSD6-BTM with a Accel high output coil. I will eventually change to a PS91 Crane coil.
  5. mustangdaren

    A.R.E rims

    I used to have 4 lug black mesh wheels on mine made by A.R.E.
  6. mustangdaren

    20' Shelby Razor's...

    Mine are 20x9 silver razors with Nitto 555 P265/35/20 tires. There is quite a difference in tire prices between the P265 and P275 tires. Not worth the money for 10mm wider tire. The car is lowered with the Eibach Pro-kit
  7. mustangdaren

    All Ford Show/Parkway Ford/W-S, NC/ Aug 25th...

    Thanks. Nice to meet you also. Sweet coupe. Congrats on the award.
  8. mustangdaren

    All Ford Show/Parkway Ford/W-S, NC/ Aug 25th...

    I posted the pics I took at the show on my website at www.xtrememustangs.com
  9. mustangdaren

    front end question

    I noticed that my drivers side wheel looked like it sat out further than the passenger side. I measured and it is out about 5/8" further. What could cause this? Could worn bushings, ball joints, or something else cause this? It just erks me cause I know it's not right even though the car...
  10. mustangdaren

    All Ford Show/Parkway Ford/W-S, NC/ Aug 25th...

    I was planning on bringing my 89 again this year but due to blown head gasket it looks like I will be there in the 07 instead.
  11. mustangdaren

    Anyone Try The New Mustang Cologne Yet???

    Chevy is suppose to release their own cologne sometime in 09 called Camaro. I heard it smells like burning oil.
  12. mustangdaren

    Post Pics of Your Mustang

    Thanks. I got the from Moss Mustangs. They come tinted. I sprayed them with bumper black paint.
  13. mustangdaren

    Post Pics of Your Mustang

    Thanks. They are Nitto P265/35/20
  14. mustangdaren

    Post Pics of Your Mustang

    Some pics of the ride
  15. mustangdaren

    Wheel/Tire - Need your info for FAQ

    Wheels: 20x9 Brand: American Racing Model: Razor (silver) Wheel: 20" Offset: 40mm Did you need/use a spacer? No Tires: Brand: Nitto Model: 555 Size: 265/35/20
  16. mustangdaren

    TDS Dyno Day, June 2nd

    Tru Dyno Sports in Conover, NC is having a open house/ dyno day June 2nd, 2007. Below is a link to info and directions. http://trudynosports.com/DynoDay.html
  17. mustangdaren

    Roush 05+ Saleen Problems, owners must see!

    That's what they made Micky T drag radials for:D
  18. mustangdaren

    can't find my fuel pump relay 93 mustang

    should be mounted under the drivers seat
  19. mustangdaren

    Any Western NC Guys??

    Hickory
  20. mustangdaren

    Vista Blue vs Windveil Blue

Top Bottom
Back
Forums
Menu