Search results

  1. zkillrr

    Just installed "Kustom" Pro Motion clutch kit thanks Killercanary for advice

    congrads, I glad you are happy
  2. zkillrr

    Who makes the best replica Saleen Wheels

    I have seen in the past people buying eagle 17inch rims and they look pretty good but they are polish
  3. zkillrr

    Why won't my Stang Idle?

    well final5-0 Thanks for the info, I guess some of us never learn fast or want to hear the truth but you put it out there and it was right on the nose. I guess the problem is we have been doing small mods for so long that we finally got the money to due bigger stuff and it really has taken a...
  4. zkillrr

    IAC restrictor plate installed!

    10/4 I will give them a try. Thanks
  5. zkillrr

    idle

    well it don't come down until i adjust it, it still runs high when i crank it but idle like it wants to die. I research and found out that the restrictor plates work well with the sn95. When i got my t/b there was a gasket that look like it had a defect b/c the holes were not center on the...
  6. zkillrr

    IAC restrictor plate installed!

    well I have the same exact problem. When i stop and press the clutch in my idle goes to 1500. I hate I missed the free bees, I'm always the last to know is it because i'm in mphs:scratch: :doh: :doh:
  7. zkillrr

    idle

    ok the t/b does not have a small hole in it, and when i unplug the iac the car idle rough for a while like it wants to cut off.
  8. zkillrr

    idle

    thanks for the help, also i took it out for a cruise today and for some reason now my idle is hanging around 1600 if i get on it and let up off and come to a stop say a red light it will only idle at 15 to 1600. The first time it did it i press the gas and it went back to normal, but today i...
  9. zkillrr

    Removing AC and Smog pump?

    also the smog pump is very easy also, take out two screws unhook the hose and you are thru
  10. zkillrr

    idle

    Well I mess around with the iac today. It would not ideal under 1000rpms. I played with it for a while and it droped between 7 to 800. I did go ahead and purchase the prof product T/B and it works ok. Now I think I need an air/feul reg. When I hit the gas my a/f gauge go lean until i get off...
  11. zkillrr

    Throttle body Help

    hellooo anybody home, are we going to read all day I need so of you all expertise. This is my only day off and i need some help, thank you
  12. zkillrr

    Throttle body Help

    thats the thing the new gasket holes are not side by side look o o thats how it looks but not that far apart but i don't think it is leaking but if so would that be my problem with the idle.
  13. zkillrr

    Throttle body Help

    also i did not use the gasket that came with the ideal control b/c one of the holes were blocked half way with the new one. did i go wrong putting the old one back on
  14. zkillrr

    Throttle body Help

    why didn't i think of that, I guess sometimes you can be to educated. thanks. Also my idle now I can't get it back to 600 it at 800 i thought i had it but i don't what am i doing wrong or not doing
  15. zkillrr

    Throttle body Help

    I just installed a new throtle body and I would say its the cruise control cable that hooks to it. Well I don't know how to extend the cable to make it snap on and keeping my idle right. The idle is find when i take it off but high when i put it back on. It gray with a cable hooked to it...
  16. zkillrr

    throttle body help

    94mustanggt5.0 do you have a problem with it making any kind of noise
  17. zkillrr

    Signing off for a bit

    Best wishes and may the lord continue to bless you and the work of your hands. :nice:
  18. zkillrr

    throttle body help

    Anybody help please!
  19. zkillrr

    Starting a mustang store... Please Read!

    thanks
  20. zkillrr

    throttle body help

    I'm lost accufab and pro products is the same company, and Im planning on ordering a set of heads and was thinking of upgrading to a 70mm b/c of a deal I was getting one for.
Top Bottom
Back
Forums
Menu