Throttle body Help

[zkillrr]

I just installed a new throtle body and I would say its the cruise
control cable that hooks to it. Well I don't know how to extend the
cable to make it snap on and keeping my idle right. The idle is find
when i take it off but high when i put it back on. It gray with a cable hooked
to it and it snaps on. Any help would be good!

 

[Chythar]

This just happend in another post:

http://forums.stangnet.com/showthread.php?t=612796&highlight=cruise+control

His was just a bit too short, so he bent the bracket to fit. Hopefully this idea'll work for you.

 

[zkillrr]

why didn't i think of that, I guess sometimes you can be to educated. thanks. Also my idle now
I can't get it back to 600 it at 800 i thought
i had it but i don't what am i doing wrong or not doing

 

[zkillrr]

also i did not use the gasket that came with the ideal control b/c one of the holes were blocked half
way with the new one. did i go wrong putting the
old one back on

 

[Chythar]

also i did not use the gasket that came with the ideal control b/c one of the holes were blocked half
way with the new one. did i go wrong putting the
old one back on

Depends if it's leaking or not. If you want to check, it's pretty easy. While the engine's idling, spray a bit of throttle body cleaner around the gasket. If the RPM's go up, the gasket's leaking. It's not that hard to modify the new gasket, anyway. You can use the old one as a pattern, so you know how big to make the holes on the new gasket.

 

[zkillrr]

thats the thing the new gasket holes are not side
by side look o
o thats how it looks but not that far apart but i don't think it is leaking but if so
would that be my problem with the idle.

 

[zkillrr]

hellooo anybody home, are we going to read all day
I need so of you all expertise. This is my only day
off and i need some help, thank you