Search results

  1. M

    Check Off list for new motor

    double post
  2. M

    Check Off list for new motor

    I can think of a few things off of the top of my head. There items ore optional, in my opinion worth changing while you have the engine apart. Timing Chain-water pump- seen bolts where listed but not items themselves. Also I would recommend buying a fel-pro One peice Oil Pan Gasket...
  3. M

    A few questions

    Well to start with, I got the engine installed and has been running for a few days now. Timing is set and the engine runs like a beauty. The molly rings even seated right away. My probelms are 1. No power stearing. Symptoms- no power steering- When I crank the wheels back and forth...
  4. M

    No juice to starter?

    First off don't laugh at my damn stick drawing. Imagine this is your battery wire going from the battery to the starter solenoid -------- .this is your wire going from solenoid to starter----, and this is a picture of the two nuts on the starter solenoid 0 0. Now here is a diagram of how your...
  5. M

    Where to buy walbro fuel pump locally?

    Just as headline says. In need of fuel pump. Have heard good things about walbro here and in many other searches. Dealer is out of the question, I'm also going with the 155 LPH due to slight mods to come this winter. So I would like to have one by Tuesday morning, but don't want to spend an arm...
  6. M

    No juice to starter?

    :damnit: The name had slipped my mind; thank you. I might want to add not to do this in gear. The vehicle will pop forward on you. If the ignition is turned to the on position the vehicle may even start and take off, not a good scenario. If the starter does engage when you do this, then your...
  7. M

    No start 89 302

    Should I stay with stock pump amount? I.E. ---225 LB hr---vs 295 LB hr...etc or gph or lph however they are figured
  8. M

    No start 89 302

    well, its confirmed its the pump. Anyone try an aftermarket pump? I know some people don't like them because some are to loud,rattle,humm, etc. Any brands I should stay away from?
  9. M

    No start 89 302

    Only if all diagrams where laid out that nicely, I would deffiently buy a repair kit from these guys. (no having to refer to index page to find what wiresr go too, its all right there)
  10. M

    No start 89 302

    Holy crap, that diagram is exactly what I have been searching for. I have book marked their homepage www.veryuseful.com. All I need to do now is crank and see if the voltage on pnk/blk stays at output. At key on engine off, It spikes to max voltage for about .5 seconds then drops to almost nil...
  11. M

    No juice to starter?

    you should have power to the starter. The wire as you probably already know runs directly from the coil (for lack of better terms, Name has slipped my mind at the moment.) I'm willing to bet it's the neutral safety switch. I'm not sure, I don't have access to a diagram, but it's probably in a...
  12. M

    No start 89 302

    Ok here are my readings. They are all going to be posted as a VD reading, as one lead was to wire and the other to ground. All wires had a VD.. even the ground wire..hmmm? PNK/BLK wire -11.5V for 1/2 second as key turned to ignition. Orange wire---11.9 All the time. Tan 11.7 Key on Red...
  13. M

    No start 89 302

    Is the FP relay easy to access under the seat? I am not able to pull a schemuatic, but am I correct in assumming the power flow is thru the FP relay, then to the inertia switch? IF this is so, couldn't I kill three birds with one stone? basically, Rather than finding the FP relay to be good...
  14. M

    Antifreeze no longer available?

    Maybe my problem was autozone. They don't carry the prestone in green do they?
  15. M

    radiator hose modifications

    I don't like cutting the radiator in the center and repairing idea. You could go the cheap way out, but it could end up nipping you in the butt later. If you don't want to have to go the speed shop or pricey route then I like Dman's idea of looking at various hoses at the local parts store...
  16. M

    No start 89 302

    Ok, I won't be able to today. Monday or tuesday. I need to be cranking to test the relay wire right? FP relay socket = plug that plugs in right before fuel pump almost on top and in the real of the gas tank?
  17. M

    O shhit!! Wat Did i DO??

    agreed, Pulling your plugs will tell you if anything big got sucked in. (likely a plug would be bent or damaged in some sort of way. If one is damaged take a borescope to look into the cylinder. if it is a mas, simply hook it back up take tape the crack and see if it starts. The engine cranks...
  18. M

    No start 89 302

    That's for 90-93 stangs. Are my wires going to be color coded the same? I have an early model 89. I think 2/89
  19. M

    No start 89 302

    Ok I have run a search and come up with a real good post. http://forums.stangnet.com/showthread.php?t=550685&highlight=start So, I have rebuilt the engine, installed, and am ALMOST ready to rock and roll. The engine cranks, but no start. Checked the schreader valve and no fuel. The pump...
  20. M

    Antifreeze no longer available?

    Found the green-no blend 100% antifreeze.--no it wasnt prestone or anything. Good ol' valucraft is all I could find. Never really cared for the GM dexcool. Hope the yellow stuff isnt similiar. Seemed when I worked at the oil shop they tend to run around a quart low per around 10,000 miles. Not a...
Top Bottom
Back
Forums
Menu