Search results

  1. ponyboy19

    Where is the TFI module located?

    I am thinking I'm going to replace this along with the PIP due to some issues that I think may not be tune related and was wondering where the TFI is located on the 94/95's. I admit I haven't looked for it but was hoping to save some time. And since my knowledge of the electrical compents are...
  2. ponyboy19

    What might cause the battery light to stay on?

    when I installed a 94/95 alt in my 92 I had the battery light come on. Mine turned out that the little thin stator plug needed to be pushed together so it made a solid contact with the alternator side of it. once that was done battery light went off. Might want to check that small plug and...
  3. ponyboy19

    Dumps or Tips??????

    I run dumps on both of mine. But at some point I plan on a nice catch back with 2.5" tails on my 92. I like the looks of a nice set of polished tails and the dumps are a bit stinky with the windows down. It's really personal prefferance IMO.
  4. ponyboy19

    JEGS 8 point cage Pics?

    I have a 8pt S&W kit that I installed as a 6pt a couple of years ago.. Here are a couple of pics of it in my 95 gt. CLICK HERE
  5. ponyboy19

    Drilled Oil Pan....Need to get shavings out??

    If I was going to try and do it on the TC cover, I would drill the correct size hole and weld a Male -an fitting over it on the cover.. Then I'd use I'm guessing -4an hose and attach the correct hose ends to it and simply screw it on the fitting that is installed to the cover. On the blower...
  6. ponyboy19

    Drilled Oil Pan....Need to get shavings out??

    just drill a hole then get yourself an -AN fitting like THESE and weld it to it.. No different then when I welded them to my aluminum valve covers for breathers.. Then you could run steel braided hose from the blower to the cover and look good too. But if the thickness is there I would just...
  7. ponyboy19

    The thread of the nicest FOXES!

    Yeah the hood is junk.. It was on the car when I bought it but why the previous owner didn't have them match it up and reglass it before the car was painted is beyond me.. It's just a future project car that I'm playing with so when the time comes I'll replace it with a quality one and repaint...
  8. ponyboy19

    Drilled Oil Pan....Need to get shavings out??

    My question is when your drill bit was spinning at full speed where all did it throw the shavings.. Did it fling them up onto your lower end? Who know's... Seems like everyone is assuming they are still in the bottom of the pan. well anywere there was an oil film would likely have caught...
  9. ponyboy19

    K-member/Manual rack

    I run an AJE and complete Flamming River manual rack and shaft. If your running a 302 with regular headers I'm not sure why the factory PS shaft would be an issue.. If it clears with the factory K now, it should have as much or even more clearance with a Tubular K. The only place I can see the...
  10. ponyboy19

    The thread of the nicest FOXES!

    couple of my 92 I took the other day..
  11. ponyboy19

    Does Size Matter?

    Well the Pro M 6" shorty filter for a 77-92mm meter will support about 580-600 hp efficiantly.. So a 5" K&N style fitler should support what ever you through at it, especially N/A.
  12. ponyboy19

    Upper Control Arm bushings on the rear

    energy suspension makes the upper arm axle bushing.. I got mine from summit racing. Although a tool to get the old ones out would have been a big help :nice:
  13. ponyboy19

    Ecu!!

    jrichker Thanks for the links.. Have you actually used either one of the scanners that you linked up? I know autozone and Advanced Auto Parts both have scanners, and neither will read either one of my mustangs codes 92gt and 95gt. Just wondering if these scanners would have the same problem...
  14. ponyboy19

    Cleaning C&L MAF sensor..

    A mechanic once told me to spray it down with "Flammable" carb cleaner.. So that's what I have always used with no issues at all.
  15. ponyboy19

    Round 1 of 418 install

    Looks great :nice: Looking at your pics makes me wish I took the time to smooth out and repaint my engine bay.. Maybe next winters project :rolleyes:
  16. ponyboy19

    New motor running way to hot in 95 cobra

    Are you sure the head gaskets are possitioned correctly with the word "front" towards the front of the block.. If not it will cause major overheating problems.
  17. ponyboy19

    sell the 94 for a foxbody...?

    Not sure I completely agree with that... :D
  18. ponyboy19

    polished alternators

    Ebay.com you can usually find then all day long for 130 ish new/rebuilt http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&rd=1&item=7975897274&category=33573&sspagename=WDVW
  19. ponyboy19

    sell the 94 for a foxbody...?

    I too have one of each. And although I love the looks of both cars, my 95 is a much better riding and performing car. Both have eibach pro kit springs and my 92 not only rattles but rides like a lumber wagon in comparison to the 95. But I like it :) I'd keep what you have if it's a daily...
  20. ponyboy19

    proper way to install new torqe converter

    Pretty much all you need to know :) http://www.partshp.com/ConverterInstructions.htm
View older results
Top Bottom
Back
Forums
Menu