Search results

  1. ponyboy19

    94 5.0 conv - comments?

    70k is nothing IMO. with 70k there is a ton of beating left to do to it :)
  2. ponyboy19

    347---cutting out at random RPM's....??

    It sound electrical to me. What is he running for a distributor. Mine was doing some weird stuff too. after about 400 miles of running fine, mine would go wacky and fall on it's face, then it would just shut off and not start. Come to find out the yoyo who put my MSD distributor together at...
  3. ponyboy19

    Optima Batteries

    I think they call them spiral cells...
  4. ponyboy19

    what size injectors?

    looking at your sig and guessing on power, I would think 36's will work fine with a FPR. 36 lbs injectors = 400 bhp @ .55 BSFC, 40 psi, and 80% duty cycle. So there's room to go if you increase duty cycle and psi.
  5. ponyboy19

    Optima Batteries

    I bought a brand new Optima red top. took the car to the tuners a couple weeks later and he calls me to tell me that my battery litterly blew up and acid spewed all over the place. It was hot for over a day just sitting on the floor. The cells must have been touching or something.. He...
  6. ponyboy19

    MGW shifter owners.. which handle?

    Yeah I think I would be happy with either. I've heard they have a new one that is in the middle of the Red and Blue. I'll have to call and find out for sure.. If so I think I will take the middle of the road one.
  7. ponyboy19

    MGW shifter owners.. which handle?

    Just wondering if any MGW shifter owners would mind telling me which handle they have, how it feels, if they would get that one again, and why. Just not sure If I would rather have the blue or red?
  8. ponyboy19

    WTF? I got the wrong connectors on my new MAF. Any suggestions?

    Send it back to AFM and have them send you the right one. I'm guessing they sent you a 99 and up 5 pin? I thought pro M use to sell a 5-4 pin harness but they're no longer around. I'd get the correct MAF and try to get anderson ship it out overnight for their mistake.
  9. ponyboy19

    Your Best 60' on street tires

    1.9x back in the day with 274/40/17 BFG comp T/A ZR. http://store.summitracing.com/default.asp?target=partdetail.asp?part=BFG-13550 But this was with a 13.xx 5spd 95gt, stock shocks and struts, sway bar on, eibach Pro Kit springs and control arms. I will say that I was extreamly impressed with...
  10. ponyboy19

    What's a broken torque converter feel like?

    mine felt like I was sitting still.. Oh wait that's because I was :D Most that I hear of, including my own, blows out sending pieces into the transmission pump and requires a rebuild and new convertor. That's what gave me the reasoning to do tranny mods on my 92 :nice: Personally I was...
  11. ponyboy19

    TFS Valve Cover hole

    When I did mine, I bought the groments I wanted to use. I then mic'd them up and drilled the correct hole which was a few thousandths smaller for a snug fit.. actually for 10 bucks I let a local shop drill a hole in each cover. I used the rubber baffled groments that I could push a breather into.
  12. ponyboy19

    Another 5 lug conversion/rim tire question

    I'm more concerned on the 17x9's fitting the 92. I plan on running the y2k R's on the 95 when the big and littles aren't on it. The 17x9's off my 95 should be ok on the 92 then?
  13. ponyboy19

    Another 5 lug conversion/rim tire question

    I'm planning on a 5 lug conversion on my 92 and want to be able to swap rim's and tires back and forth from my 92 to my 95. I have a set of 17x9 cobra R's and a set of 18x9 00 cobra R's. Will one or both of these sets of rims work with the cheap axle and rotor conversion like this one on my...
  14. ponyboy19

    If you were going to have a new engine BUILT, what who and where?

    www.bennettracing.com
  15. ponyboy19

    went to the track need input...

    If you ran a 13.2 with a 2.1 60ft then there is definetly solid 12's written all over that car. Get some MT slicks or DR's and get the 60ft down in the 1.6-1.7's and nail the shifts.. I think you'll be surprised :nice:
  16. ponyboy19

    Anyone Interested in a Polished Firewall Cover?

    same here.. I'd like to see what we're talking about before I lay any $$$ down. Is it plastic, alluminum, coated?
  17. ponyboy19

    Where is the TFI module located?

    Yeah Vib I think your right. Although no James Bond thing going on here :) I think the 42's are spraying way to much fuel at part throttle and need to be adjusted. The car supposedly is slightly on the lean side at WOT but other wise it's obvious that it's dumping the fuel to it down low...
  18. ponyboy19

    Where is the TFI module located?

    I replaced it and it didn't fix the problem.. Car runs very rich at idle and after about 5 minutes it's like you turn the key off. It will try to start but acts like it's flooded out, which it probably is. It's gettting good spark even though it won't start so I'm guessing it's a tuning issue...
  19. ponyboy19

    Where is the TFI module located?

    Yeah i'll have to have them check it out.. that's the issue, it's fine until it reaches full temp then things get screwy. I have a partial chip burnt but the car is EXTREAMLY phat at idle so I'm not sure if it's a fuel issue or a TFI issue. If it was just hot starts I would pawn it off as...
  20. ponyboy19

    Where is the TFI module located?

    thanks.. I have a brand new 400 mile old MSD distributor so I guess the PIP shouldn't be an issue. I'll just throw on a new TFI. The car is still "for the most part" untuned and besides hot start issues I've been seeing where once up to temp it will stutter, tach will jump, and then it will...
Top Bottom
Back
Forums
Menu